Counting matching models…
Made to print without supports, works with couple of helmets I have, the strap width is 16.5 mm. I used PLA with 0.3mm layer height. There is a slight angle to compensate for the strap orientation, that's why there is a left and right…
...numbers getting worse, required to wear FFP2 and even recommended here for kids in school. From what I read, FFP2 / KN95 masks can be reused few times when dried properly for 7 days. => this design takes 5 cloth pins (9mm wide) and…
I have printed it with both a 0.4 and a 0.6 nozzle. Setting it to either 0.8mm z with 0.2mm layers or 0.9mm with 0.3mm layers both work well. In the photo there are my previous versions as well, the cross piece got in the way of a…
Having worn one mask already I thought there should be a better way to extend their life and add some much needed humor around me. Enter the mustache magnetique, in revolutionary orange colour by Maker Series PETG USA. There is a hollow…
a simple mount to clip your microphone above your monitor. PETG recommended
It's for G2 bionicle heads (okoto heads)
If you want to reuse FFP2/KN95 Masks they should ideally dry fore a week before you reuse them. Furthermore they shouldn't be used for a long period of time. That's why there are Clips for two Masks a day times seven (for the seven days…
THIS IS COVER FOR NOKIA N 95-1 ONLY NOT FOR 8GB VERSION print options: PETG Nozzle first layer 240°c other layer 240°c BED first layer 80°C other layer 80°c Max volumetric speed 2-3 mm3/s settings checked on slicer anycubic For any other…
yes, it is another earsaver, but I was not able to find one for my problem. Since we now have to use mostly FFP2 / KN95 mask in Germany, we encounter some brands which are providing very short earloops on their masks. Therefore the…
It is based on the N95 cap from https://www.thingiverse.com/thing:4225667 Someone asked to get the cap with holes. Category: Tools
https://collectiveshield.org/ great design from the original team. i edited the file to print faster. pla works great it is a protective layer for the n95 mask and works great! Print Settings Printer Brand: Monoprice Printer: Maker Select…
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
When fit testing N95 masks there are two spray bottles. We lost the case a long ago that they came in, and when you put the sprayers down they leak all over the place. So I designed this stand that will hold the bottle upright, is fast to…
Many people are using the outstanding Envo N95 mask. However it has an exhaust valve on it, meaning many medical providers are having to wear a surgical mask over their Envo. I printed this TPU plug to sit on top of the valve to keep it…
Plegable FFP or N95 mask case. No supports. Easy print. If pin don´t fits perfectly, glue (with cianoacrilato if possible) the plain side of the pin into the hole. Recommended 0.24 mm layer height. Includes .f3d file. Proved on PLA and…
This is a cover that blocks the exhaust valve so you won't risk spraying out covid. Print and glue to mask
It is a case for children's masks, it is very easy to print. KN95 Children's Mask, approved against viruses and bacteria, offers us a filtration efficiency above 95% Recommended by the OMS -4 x 10 * 2 neodymium magnets Print instructions…
This is not an entirely serious design: a 12V radial fan of that size generates about 20 cfm of airflow without the filter in place, so realistically this will not improve air quality in a normal sized room in a reasonable amount of time.…
Español: Caja para almacenar una mascarilla FFP2 o KN95. Para cerrar esta caja, es necesario poner 8 imanes cilindricos de 10x2 mm English: Box to store an FFP2 or KN95 mask. To close this box, it is necessary to put 8 cylindrical magnets…
Rather than buying new filters, use your old expired KN95/N95 masks to at least mostly clean your IPA. Print in PETG. Caveats: Avoid using the masks unless the parts are heat welded together. External aluminium nose strips are generally…
The frame of my headphones was coming apart and poking me in the side of my head. I created the clip to replace the rubber band I've been using.
I found a model for a 2004 Mustang by Miguel Antonia A. on 3dwarehouse here: 3dwarehouse.sketchup.com/model/a3ec06c1-2306-4e81-adde-df87013d295c/2003-2004-Ford-Mustang-Mach-1?hl=en . He did an excellent job! It took forever to fill in the…
This is just a simple little KN95 (or certain kinds of N95) mask holder thing I drew up quickly. It easily holds 25+ masks. I used a couple command strips to attach it to a wall, but it works just as well on a tabletop. Nothing too wild…
This cover meant to extend the life of the masks. This mask cover is optimized for TPU 95A filament. Nose section can be sewn together with a few stiches. Welding also can be used. Project file also included.
If you have a 3m tc-84a-1299 mask - you've probably been told it's not good for the current COVID 'protection' being mandated. Most people don't get it - but these masks vent your exhaled air, so if you have COVID - in theory you'll…
