Counting matching models…
Creating an Stand for my Nano3 BTC Miner incl. original EU Power Supplies. Then i create a new Backcover. It brings -10°C less Temperature and ~1000rpm less Fanspeed when you remove the Backcover and replace it with my Cover. This Cover…
A 3D printed test adapter for connecting the SMD test-pins, especially for the SWD debug-interface, via pogo-pins. The OpenScad source file allows setting the diameters of the holes with the three parameters “shaftdiameter”,…
Tiny whoop canopy for the runcam nano3. Cam angle is about 45 degrees and 0,55 grams Update 2023 v2 canopy . It's a bit smaller 0,53gr and bit higher cam angle and holes are smoller for a tighter fit. (the scale and the black frame is V2.
This is a housing design to be used with the open source head tracker from https://github.com/dlktdr/HeadTracker . My goal was to use it for both my Fatshark and DJI goggles by simple attachment with velcro. You can use either the NANO33…
the device Have a space on the inner side of the bottom part for a 200mm pc fan (i will use an noctua 200X30) and on the under side of the bottom for a filter element at this time the whole thing is still not tested, so you do al your…
Most filament rolls are narrower and do not stay in the middle of NaNO3's holder. Snap on distancers to center the roll. Print with PET for permanent elasticity (PLA loses tension over time). For other sizes use the step-file in a 3d…
Printed in TPU with tree supports.
Prototype avalon nano 3s and 3 canaan openair case top i used mine to cover water block to help cool air flow better as its chips are watercooled but components are air cooled thus openair flow running medium seems perfect this is a…
