97 models
I tried the dilator by @Rieva_1598535 but it pinched my septum even when scaled up, so I redrew it based on the sketch provided. I also made the ‘paddles’ a bit deeper and reduced the depth of the ‘frame’. The F3D file is included in case…
Disclaimer : This is a copy of a medical device. This design has no commercial purpose and is for personal use only. This famous, simple and effective device is made for nasal cleansing with saline water. (search internet for…
I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed. It requires/was made to work with: https://www.prusaprinters.org/prints/151972-dyson-v7-v8-v10-v11-v15-vacuum-bag-adapter
This is a storage/drying rack for the Navage nose cleaner. The main unit sits on top, and the saltwater tank can be perched above it. The waste tank slides underneath. I've also made a separate holder for the nose piece. I thought about…
Use only distilled- not tap water. One of the attached scoops of salt per 100ml of water. Caps are for PCO28 1810 and 30-25 Low included. Most PET bottles are one of the two.
The neti pot is tilted intentionally, that way the saline/water does not overflow out of the trunk (when you fill it) and allow lower trunk for optimal design. Designing neti pot involves the optimal way of less pot tilting and how much…
Easily prints in PETG or PLA. Using 0.3mm layer height as there's no need for detail. Version 1.2 is called “thin brow”, as it has less overhang at the very top. This makes the holding a little bit looser.
OUTDATED!! Make the Blinking module featured in This instead: Nasal Activation by Snarling Amplification Blinking (NASA Blinking for short) Made by: Costescu Catalin Mihai (@portallabs on Instagram: Tag if you post this design somewhere…
Smell Stick - use cotton for the center (v3) or wick to coil into the star gap and soak with a few drops essential oils
I use this adapter to connect the nasal aspirator from Angel-Vac with the Dyson. Remix of https://www.printables.com/model/185986-dyson-v7-v8-v10-universal-adapter-different-nozzle Notes: Bed plate: Satin Powder-coated Steel Sheet…
Spare parts for the nasal aspirator from Ranyak. Parts can be combined. The manufacturer used a fragile material and cracks will form when dropped and the parts will not hold together, see photo. I reinforced the walls to prevent…
Put together this prop for use in education of people for proper naloxone use Category: Other
This will hold the contents of one 72 count box of Breathe Right Extra Strength Nasal Strips. The ones sold by Costco. It will hold the regular strength as well but those are not as wide and come in smaller count boxes. I printed with PLA…
Wife asked me for one. Did a simple model and thought I would share.
I needed to clean my stuffed nose, so here it is, a nose rinse. Just a cap on a pet bottle with a nozzle. Printer: Prusa i3 MK3 Nozzle: 0.4 mm Material: PETG PrusaSlicer standard settings 0.2mm quality Infill: 100%
Pollen season! My son asked me to make a key fob to hold his nasal spray, so here it is. Obviously, there's no size standard for nasal sprays :-) This container is sized for bottles up to 24 mm in diameter and 60 mm high. Fusion 360…
This is a simple adapter made for Dreame vaccum cleaner with internal diameter of 30mm. It was made so that my kid's nasal aspirator can be connected to it.
Used to help clear ear canal when blocked.
Wer häufig eine Nasendusche verwendet, macht dies üblicherweise mit 0,9 prozentiger physiologischer Kochsalzlösung. Diese kann man teuer kaufen oder einfach selbst herstellen: 9 gramm Salz (idealerweise naturbelassen ohne Rieselzusätze)…
Nasal irrigation olive to use with standard syringe. Print in TPU with 2 (or 1) walls, 0.1 layer height and no infill. There is also a *_spiral version to print in vase mode. *** Read This *** Please do cold sterilize before use and…
Stand for test tube and nasal swab for COVID self-testing purposes. Designed for MP SARS-CoV-2 Antigen Test Card (07AG6020B), but works with test tubes to 10mm diameter. Stand for holding test-tube with extraction liquid during…
It is a tool to spread the end of the inhaler. The head can be unscrewed and the bottom part can be screwed on to the inhaler's original threads. The design is made for the brand "nózi" but with little modification it may work with other…
Replacement nasal spray clip, meant for Kirkland brand nasal spray.
Nasal showers are a great way to fight sinus infections and to clear the sinuses for pressure equalization for divers. However, I do not want to bring a full sinus rinse kit with me on a dive holiday. All other versions I found online…
If you have allergies or nasal issues rinsing your nose with a nasal shower can really help. The plastic showers from the pharmacy are quite cheap, but the salt they sell with it comes with a lot of packaging waste and is 25x times more…
The Eustachian tube connects the middle ear with the nasal-sinus cavity. When clogged fluid builds up in the middle ear. Autoinflation with a nasal balloon [1] can facilitate middle ear ventilation in children by opening the Eustachian…
Cover for oxygen masks so that they are covered when not worn. With optinal keychain hole.
Medieval Nasal Helmet Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Fantasy Items here: https://www.printables.com/@StudioMechanik/collections/2975356
I use this adapter to connect the nasal aspirator from Angel-Vac with the Dyson Big Ball. Remix of https://www.printables.com/model/185986-dyson-v7-v8-v10-universal-adapter-different-nozzle and…
Since I have some problems breathing through the nose, I'm trying nasal irrigation at the moment. Not the most pleasurable experience for me … but if it helps in the long run, well … 😅 One should use saline water of the right…
Use this to suck up boogers, wash out your nose, or to clean your ears with peroxide, provided you used a safe material. I do not recommend using this, as it may use too much pressure and damage your eardrum among other things such as…
Electrolux vacuum adapter to baby-vac nasal aspirator. 100% infill. Printed from PETG. 0,2mm layer height.
The extension of adapter is from 6mm to 7mm wide, change it in provided.3df file if you need to. Adapter for Silvercrest SAS 7.4 LI D3 you can find here .
Two parts of a nasal aspirator (Katarek). They break quite easily, so I designed replacements.
Like many people, I have a mild form of sleep apnea, and sometimes wake up in the middle of the night because I'm unable to breathe. I've heard really good things about the magnetic dilators, but I think they're overpriced for what they…
Deutsch / German: Ein Adapter um den Angel-Vac Nasensauger für Standard-Staubsauger im Handstaubsauger von Aldi-Süd benutzen zu können. Das Akku-Handstaubsauger-Modell ist "EASY HOME VC 2118 0518". Die Abmessungen der Außenseite der…
This is another take on the nasal spray bottle I posted here: https://www.printables.com/model/516022-nasal-spray-bottle-container-lipstick-style It has thicker walls, so it's stronger, and has a cap that threads into the body. I've…
This is a simple caddy intended to hold the nose pillows from the Resmed P10 Nasal Pillow Mask. It can accommodate five pillows on either side and has a dust lid for the clean side. Printing Tips The sliced file provided was for site…
Simple adapter to connect nasal aspirator for children to handheld SilverCrest vacuum cleaner. Print on 0.2 resolution, 3 perimeters, 100% infill, no supports needed. Add brim at your discretion, I didn't need one. If you have another…
This gauge is made for sizing the Philips Dreamwear and the Resmed AirFit nasal masks. I could not find any downloadable sizing gauge for those two type of masks, only instructions about nose width and corresponding size of mask. This is…
Xiaomi mini vacuum cleaner adapter for nasal snot removal tool. Print Settings Printer Brand: Anet Printer: A4 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category: Other
This adapter allows you to connect a nasal aspirator (Katarek) to a Dreame vacuum cleaner. By default, the aspirator’s tip does not fit because the vacuum cleaner’s opening is too large. WARNING! AdjustThis is an adapter to the vacuum…
Someone I know has need of a nasal spray medication that they must carry with them. It's expensive, and comes with a pump. It has to be protected from light. Worse, it would accidentally trigger when in their pocket. They asked if I could…
Designed to fit regular fragrance filter sponge sticks (6.4mm hole diameter). Perfect for sniffing essential oils like white flower oil which can help against a runny nose. Depending on its content it can be very handy. Snap and lock…
Nasal Inhaler is a nasal aromatic stick with a cooling and refreshing effect. It helps keep the feeling of freshness in the nose.
a shorter (more easier to print) version of the Nasal rinse nozzle/adapter.
Go to files to see the different size and shapes available.
My mom is on oxygen, and when she switches from her portable oxygen concentrator to her main oxygen concentrator, she is always left with leaving one cannula out in the open to collect germs. So I built her a quick box that allows the…
Originally I posted this to Thingiverse in 2016 This is a case designed to hold a 3 month supply of ResMed AirFit p10 Nasal Pillows. I may create other sizes as well. I printed in a flexible filament such as TPU but ABS/PLA should work as…
I've been on the journey to organize my bathroom drawer full of my bathroom essentials, including a couple of bottles of allergy nasal spray. So I decided to utilize the Gridfinity system, but I couldn't find anything to store my nasal…
Nasal ring with 3 different size and ready for 3d printing
Abdeckung/Deckel für Weck Glas mit Spritzenhalter für zb. Nasenspülung/ Salzlake Für Weckgläser mit einem Außendurchmesser der Öffnung von 95mm Gedruckt in 45 grad um möglichst wenig Support zu benutzen. __________________________________…
This is a storage case designed specifically for Breathe Right nasal strips. The case allows you to store individual strips vertically, making them easily accessible when needed at bedtime. Features: Vertical storage design for easy…
Quick and easy replacement nasal spray clip. Designed to fit nasal spray bottles that have approx a 14.4mm diameter & 5.3mm height. Best to print with TPU, but I'm sure it would work with PLA as well.
I wanted a simple tray to hold the packets for my nasal rinse bottle packets and vials that I have to mix in with the solution. Here's a variation of my other nebulizer vial holder that fits my needs. May not be what you need but if it is…
Nasenspray Schlauchmarkierer Wer kennt es nicht, man hat Schnupfen, es ist Nacht, das Nasenspray neigt sich dem Ende. Das kleine Röhrchen ganz unten im Nasenspray zieht kein Nasenpray mehr, man dreht und dreht und pumpt und pumpt in der…
My cpap mask has vents that blows directly forward from the face, which always blew right at my fiance's face and made her cold. So I made this vent director for the ResMed Mirage FX nasal cushion. This will change the air flow from the…
This simple nose strip holder was designed to be placed on a nightstand and keep things organized. The design is simple and trivial to change. 2 layer perimeters and 10% rectilinear infill with any material should work.
NOTE: As this doesn't have the holes and one way valve to expel carbon dioxide when breathing out it is not safe to use, so, uhh, nothing to see here, carry on. This is a replacement part to fit the Respironics WISP Nasal Mask onto a…
This is a quick and functional 3D reconstruction of the mouthpiece for the Katarek Travel nasal aspirator. I reverse-engineered the design by measuring the original mouthpiece and translating it into a 3D model using Fusion 360. The model…
Easy and fast to print small device to perfectly measure out 2.0mL (2.9g) of fine salt (remember to use the stuff without added iodine) for a 0.9% saline solution for a 300mL nasal irrigator . The hopper is optional but recommended. It…
Bit rushed in the morning? Daily cleaning of the CPAP can be a chore. Grab the hose and rinse it while you’re in the shower anyway. Then, hang it from the shower cabinet, to dry on these hangers for later in the day. This bucket (whit…
Another HSW-as-a-nightstand holder. Fits your favourite set of earplugs, one pack of tissues and a nasal-spray. Use the Fusion-file to adjust hole-dimensions, if needed.
Spender für Nasenspülsalz (tüten) im Star War Design
This is quick and dirty adapter that fit my vacuum and attaches to nasal aspirator to remove baby's snot in quick and efficient way.
Czech: Tiskněte tryskou 0.4 mm z PETG či PLA. Budete potřebovat silikonové díly z originální sady. Tyto modely jsou pouze náhradní díly za akrylátové tělo odsávačky. Spodní díl tisknout na stojato bez podpor. Horní díl tisknout na stojato…
I was hanging my CPAP nasal mask with 2 metal hooks to dry after washing it every morning and was worried about potentially damaging the mask. It was also just not the most stable. So I designed this drying tray which hangs from a towel…
This adapter joins a RESMED 11 hose to a Siesta N5B Nasal Mask. I would commonly forget the adapter for my travel set, so I measured the original, improved it's design so it fits tighter, and printed my own. Printed in PETG although, PLA…
Using a Nosko nasal aspirator designed to connect to a vacuum, my vacuum is too big and powerful and it's a pain to move. So I designed this adaptor to fit onto my Concept Wet&Dry handheld vacuum that's easier to use and isn't too…
Zut, Vous êtes tombés malade ! On est dimanche et vous cherchez par tous les moyens déboucher votre nez convenablement... Soudain, vous vous souvenez que vous aviez un spray Actisoufre au fin fond de votre boite à pharmacie, CHOUETTE !…
Print thick, I did 0.3mm with 0.4 nozzle, spiral vase mode! When I need it quick I print this at 200÷speed
A small color tag for your nasal spray bottles. Useful in this flue ridden time so you and your family members don't switch it up accidentally. I used PETG so it snaps on nicely.
When using nasal irrigators, ensure their hygiene and proper drying. Due to their construction, it is very difficult to place them so that the water can flow freely. The presented stand perfectly solves this problem. It also has space for…
A set of 3 3x1x3 Gridfinity containers for various nasal sprays: Afrin ( .5oz/15mL ) Azelastine ( 1oz/30mL ) Walgreens generic brand Nasacort ( .57oz/16.9mL ) Print with your material of choice, no supports needed, don't use a brim unless…
quick hacky remix of Dominate4life 's model to hold the 4 leftover nasal sprays after you grab the 5-pack. has some imperfections where the seams came together on the sides but it's super minor and good enough™. pictured with “Aller-Flo”…
Designed to perfectly and securely cradle your nasal pillows and not hang from the strap causing it to stretch.
Holder for nasal spray Print in glow, to see it by night. If it not fit your spray, your welcome to remix it. i make a .step file so you can remix it easy. Print Settings Printer: Geeetech i3 pro b Rafts: Doesn't Matter Supports: Doesn't…
A compact and practical bottle dryer for nasal irrigators. I’ve had other bottle dryers before, but they took up too much space in the bathroom, and the top part didn’t fit properly. That’s why I decided to design this custom model, so it…
I wanted a simple tray to hold the packets for my nasal rinse bottle packets and vials that I have to mix in with the solution. Here's a variation of my other nebulizer vial holder that fits my needs. My pharmacy changed and the vials I…
a TPU piece to relief friction pain at Nasal bone aria of "Head-Mounted Magnifier".
The silicone headgear deforms without having support, this stand properly supports the headgear, extending its life. NOTE: This is tested with a Medium Frame, MW Nose piece (other sizes may fit.)
This thoughtfully designed model features a sleek rectangular form with three evenly spaced circular compartments, offering both functionality and a clean, modern aesthetic. The rounded cavities are ideal for securely holding small items,…
This is mouth-operated nasal aspirator for babies. Can be connected to manual vacuum pump as spare part.
EN: Replacement mucus collection container for NOSOVÁ ODSÁVAČKA GAMA (baby nasal aspirator). The original part got warped during sterilization, so I designed this 3D-printable version. Outer diameter: 27 mm . Printed in PETG CZ: Náhradní…
Nasal irrigation bottle stand remix. Lower than the original to fit in the plate of Bambu Lab A1 Mini. Also removed sachets spaces and made the wall thinner to save some filament
This is a box with four compartments for storing the salt packets for the Emser nasal rinse.
This 3D model was designed as a direct replacement for an original syringe adapter that broke. It connects a standard Luer Lock syringe to a children's nasal olive for nasal irrigation (Lavonase type). 📐 Technical Specifications &…
This is a quick and functional 3D reconstruction of the mouthpiece for the Katarek Travel nasal aspirator. I reverse-engineered the design by measuring the original mouthpiece and translating it into a 3D model using Fusion 360. The model…
Nasal showers are a great way to fight sinus infections and to clear the sinuses for pressure equalization for divers. However, I do not want to bring a full sinus rinse kit with me on a dive holiday. All other versions I found online…
A small color tag for your nasal spray bottles. Useful in this flue ridden time so you and your family members don't switch it up accidentally. I used PETG so it snaps on nicely.
My cpap mask has vents that blows directly forward from the face, which always blew right at my fiance's face and made her cold. So I made this vent director for the ResMed Mirage FX nasal cushion. This will change the air flow from the…
This is a box with four compartments for storing the salt packets for the Emser nasal rinse.
Elevate your sleep therapy experience with this specially designed adapter that bridges the Philips DreamWear Nasal CPAP mask with the Resmed CPAP machine hose. Engineered for a perfect fit, this adapter ensures a leak-free connection,…
