17 models
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing. It requires a M3 hex bolt and nut to secure the gear to the lens. NOTE: You must remove the rubber cover from the lens ring before installation, the same as you…
This is a focus gear for use on a Nauticam housing with a Canon 100 USM macro lens. It requires a 3mm hex bolt and nut to secure the gear to the lens. Print instructions Category: Camera Summary This is a focus gear for use on a Nauticam…
If you put the handy Nauticam Bayonet mount on your housing to use the CMC lens or the WWL lens you'll find that the lens cap will no longer work, so this one will go on the bayonet mount. For best results I printed the bottom 6.88 mm at…
This is a zoom gear for a Nikon Z mount 16-50 lens, for use inside the Nauticam Z50 housing. This design will require a M3 screw and M3 nut to secure the gear to the lens. Print instructions Category: Camera Summary This is a zoom gear…
This a holder/flip for Nauticam Macro port and 2 different INON diopters. Features sunken nut casings. The diopter holders are customized for those I have. There is no guarantee that they fit for you. I highly recommend that you go to…
Simple zoom focus for 60mm macro lens
A simple zoom gear for the Olympus m.zuiko 12-50mm lens in Nauticam housing. The zoom gear allows to control zoom, but not the special macro switch. The design is based on my reconstruction of something I remember seeing in an Alex…
Basic zoom gear for Nauticam N120 Canon 14-35mm. Seems to work fine, simply pushes on to lens. Leave rubber grip rings on, zoom gear chocks into them. Category: Camera
This focus ring is for Nauticam diving case and Panasonic 45mm macro lens.
Recommended to print in PETG or ABS/ASA. Due to the shape of one of my diopters, a sabot ring s required to hold it properly. I ultimately had them machined out of corrosion-free aluminum since the plastic broke. They might have to be…
Nauticam Vacuum Valve I - opnner, will help you twist the valve without the sore. Remix for ease of carry in small bag. minimal filament use, 30 mins print time on my Voron. Test print on Voron2.4 ABS/PLA filament Test on Nauticam…
Press on zoom gear for Tokina 11-20mm lens, on N120 port system. For anyone who needs it, gear specs that I used are: Outer Diameter: 102mm Number of Teeth: 100 Module: 1.00 Pressure angle: 14.5 deg Fusion 360 file and STL available.…
Nauticam N120 port cover, male version (see female version also uploaded). Keeps dust and crap out when travelling. Works on domes or port extension rings. Fusion 360 also available. Category: Sport & Outdoors
Nauticam N120 port cover, female version (see male version also uploaded). Keeps dust and crap out when travelling. Works on domes or port extension rings. Fusion 360 also available. Category: Sport & Outdoors
A simple handle to open and close the Nauticam vacuum valve ver.1. The release screw can sometimes be a bit hard to open after a dive so this handle makes it much easier and faster to open and close the valve. Printed in ASA. The file is…
Simple cover for Nauticam 4.33" dome, as the OEM neoprene doesn't stay on with dome installed on housing. It's nothing fancy, basic friction fit. Also a couple of holes for venting and/or little tether for boltsnap. Fusion 360 file also…
Protective rear cap for the lens port of Nauticam underwater camera housings. The port size is N85, which is typically used for MFT cameras such as Olympus or Panasonic. No supports needed, recommended material PETG.
