Counting matching models…
Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Neutrik NC3MXX cable mod. Turning a normal plug into a 90 ° angled low profile plug that you can print in your own color for match and marking. Features : - 4mm and 6mm cable support - Supports both male and female plugs, and plugs with…
OnStep is a computerized goto system, usually for stepper motor equipped mounts though any step/dir interface motor driver (including servo) should work. It was designed, from the beginning, as a more or less general purpose system and…
A phone holder for my Ford Fiesta MK9 that fixes to the Sync3 infotainment display. It should also be suitable for a Ford Fiesta MK8, because of the same infotainment display. This model was created for an iPhone 11/XR. Printed in PLA…
Low profile Pci-e bracket for HP NC364T 435508-B21 Quad Gigabit Ethernet card update 06/12/2020 Uploaded dwg and obj files Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill:…
This dust shoe builds on the ideas of: https://www.thingiverse.com/thing:3887768 https://www.thingiverse.com/thing:4743418 Those two are in turn based on the ideas of:…
I bought a CNC3018 on E-bay few years back, because I wanted to be able to mill my own PCB boards. As was to be expected from a very cheap machine, the rigidity and precision is not great. There was play in the bearings, the z-stage was…
Náhrada trapézové matice pro posun podložky CNC3018, tisknuto z PA12 - nylon. Pro montáž jsou zapotřebí šrouby M5x40 - 2 kusy, podložka pérovka 2 kusy.
Ninja advises that you should flatten any leftover ice cream in the cup before refreezing so as not damage the blades when putting it back into the machine. This is designed to fit the cups of the Ninja Creamy NC300 with a width of 9 cm.…
Each models are made by myself and shown in videos down below. EP1 : EP2 : EP3 : EP4 : EP5 : EP6 : EP7 : EP8 : Notice : These models are for educational purpose. Please take care of your safety first, and do it at your own risk.
Video: https://www.youtube.com/watch?v=DPaIl7EQeWA Remix of the great Dust Shoe by quartit. Thanks for the Fusion 360 file it made it easy to remix! Some of the changes I have made: Increased the tube size to 2.5 inches for my dust…
Made it as replacement for a Toshiba TOSVERT VF-nC3 dial knob. The original one went missing, so the design derived from pictures. Printed model works fine though. Available as 6mm and 6.35mm = ¼ inch D shaft versions, the Toshiba VFD…
Before you print Check your CNC3018-like machine if it fits this design. I know there are many variations of this machine with LMUU10 bearings on Z-axis instead LMUU08 and different bearings spacing. In this project the spacing between…
Adds a raspberry pi over the "new" Woodpecker CNC controller for CNC3018 machines and others alike. It was designed to be held by the existing screw holes of the clear case. Fit is tight. it will be held just by pressure. Two versions…
Based on [RS-CNC] Mafell FM1000 by ChuckZombie on Thingiverse. For some reason, my MAFELL FM1000 didn't fit in the original design. I hadn't realized it before but the tool was not "sitting flat" on the 43mm collet, as there was not…
Inspired by the "CNC 3018 Pro - Dust Collector" I designed this suction adapter, because I wanted to forfeit as little freedom of movement laterally as possible and the motor diameter did not fit. Additionally, I like the idea with the…
This is to stop the 8mm bolt head spinning in the T slot of the work surface if you bought a version with the clamps. 7.4mm hole and 14mm across flats (nut_holder.stl) Makes it a lot easier to use the wing nuts. Added a 6mm version upon…
Holders for Honda VFR 400 NC30
Fits with the linear rail conversion
Details werden folgen Print Information: Printer: Prusa-Mini Filament: Prusament PETG Galaxy Black Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts: No Supports: No
Remix du cache poulie de l'axe X sur RS-CNC32, My version of RS-CNC, mais plus épais et passage de l'axe. Le cache protège la courroie des poussières et permet la manœuvre de l'axe manuellement. Le bouton est le même que celui de l'axe Z.…
Boitier écran LCD 3.2 pouces pour RS-CNC32 Ce boitier vient à la place du boitier original et utilise les même trous de fixations. Il n'y a pas de fond, ce qui permet d'avoir accès aux boutons reset et boot du module esp32. La prise usb…
Coin de plateau pour RS-CNC Ce coin est collé à chaque angle sur le dessus des "Botton corner", ce qui simplifie la découpe des angles sur le panneau médium qu'il suffit de couper à 45° sur 25 mm. Le plateau est fixé sur les vérins (voir…
Boitier écran LCD 3.2 pouces pour RS-CNC32 Ce boitier vient à la place du boitier original et utilise les même trous de fixations. Il n'y a pas de fond, ce qui permet d'avoir accès aux boutons reset et boot du module esp32. La prise usb…
Out of stock the CNC 3020 router doesn't have limit switches mounted even if there is a sufficient number of inputs available on the controller. So I designed some mounts to adjust and fix the limit switches from type 105126SPGJL5375. The…
Modifications du X motor sur RS-CNC32. Insertion du roulement 628 arrière par l'extérieur, ce qui permet l'introduction de la poulie GT2 20 dents plus facilement. Découpe avant pour positionner la poulie GT2 60 dents au plus proche du…
Modifications du X motor sur RS-CNC32. Insertion du roulement 628 arrière par l'extérieur, ce qui permet l'introduction de la poulie GT2 20 dents plus facilement. Découpe avant pour positionner la poulie GT2 60 dents au plus proche du…
This TFT holder was designed for the RS-CNC32. Now you can reinsure the strength by adding brass inserts. To print both sides, simply mirror the model in your preferred slicer.
Thanks to @Coat for sharing the offline controller and tools holder for CNC 3018 ( https://www.thingiverse.com/thing:4507781 ). This gave me the idea of creating a holder for my Probe Sensor. OpenSCAD file is included for you to adapt to…
Insert plateau RS-CNC32 Insert pour écrou de 8 mm. Perçage plateau de 12 mm. La tête peut être soit en surface, soit encastrée de 10 mm - diamètre 22 mm. L'écrou est collé dans l'insert et l'insert collé dans le panneau. PLA Densité…
With this two mounts a water cooling radiator can be mounted to the portal of a CNC 3020 milling router to replace the ridiculous water bucket cooling by a closed loop. No new holes have to be drilled because only the existing bolt holes…
to create you will need a used or broken cutter for a collet 3.175mm, with a tail length of at least 1mm (in my case, this is a 0.5mm corn cutter of which 1.7mm is left). spring and ejector pin from the CD or DVD drive of the old laptop…
Coin de plateau pour RS-CNC Ce coin est collé à chaque angle sur le dessus des "Botton corner", ce qui simplifie la découpe des angles sur le panneau médium qu'il suffit de couper à 45° sur 25 mm. Le plateau est fixé sur les vérins (voir…
Insert plateau RS-CNC32 Insert pour écrou de 8 mm. Perçage plateau de 12 mm. La tête peut être soit en surface, soit encastrée de 10 mm - diamètre 22 mm. L'écrou est collé dans l'insert et l'insert collé dans le panneau. PLA Densité…
Remix du cache poulie de l'axe X sur RS-CNC32, My version of RS-CNC, mais plus épais et passage de l'axe. Le cache protège la courroie des poussières et permet la manœuvre de l'axe manuellement. Le bouton est le même que celui de l'axe Z.…
In the previous simple version water pump and fans are always running on full speed which is not necessary, loud and annoying. Additional to the already mounted parts with the parts provided here a temperature controller board can be…
Fan holder for CNC3018 machine, to fix along with laser. It helps a little when engraving on wood or cutting plastic, to make smoke go away better. Not recommended to use when cutting paper, it'll blow away cutted papers. Connect it to…
This snap-on ring fits the Revopoint Turntable Adapter by MyCDC3D found eslewhere under this category. It provides 16 planar faces angled at 30 degrees for the attachment of additional 3D scanner markers. Printed in matte black PLA on a…
Fan holder for CNC3018 machine, to fix along with laser. It helps a little when engraving on wood or cutting plastic, to make smoke go away better. Not recommended to use when cutting paper, it'll blow away cutted papers. Connect it to…
