Moon Necklace Holder
A five post, lunar-themed necklace holder. Prints with no supports and hangs with two nails or screws.
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
- Downloads
- 258
- Likes
- 79
- Rating
- 5
1,451 models
A five post, lunar-themed necklace holder. Prints with no supports and hangs with two nails or screws.
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
This Keychain is 45mm in Diameter and a 4mm Base with 0.7mm letters going in (4 layers). the hole is 6 mm. 100%infill for the best strength.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Play with the size of the unicorns to print small unicorns for earrings or bigger unicorns for necklaces :)
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
No flashy gems or gold here—just clean lines and a humble look that goes with everything from a burlap sack to a hoodie. Just slide through a leather cord or a string, and you’re ready to go. For the best look, use a wood-fill PLA…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
A little necklace thing to hold your rings if you need to take them off, but want to carry them with you. Could be useful for people who wear protective gloves at work. Printing Printing should be easy, this one was made with a 0.25mm…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Bestie heart can be used for necklace/backpack/keychain. Fun little gift to make for your kids class. Enjoy!
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Small jewelery hanger for rings and chains. 25mm tall and 33.2cm when printed and installed in pairs to fit the inside door of IKEA closet. Fixed to closet door with double-sided tape File is cut in half with a puzzle inspired dovetail…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Love Heart necklace for you or someone you love or better yet for all the girls in your kids class at school... Enjoy!!
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
How about a fancy pendant? How about a cookie? Go for it. Here it is: A slightly oversized cookie. Choose your cookie chips in any colour. Chocolate cookie with white chocolate? Cinnamon cookie with chocolate chips. Or a funky red cookie…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
This Keychain is 45mm in Diameter and a 4mm Base with 0.7mm letters going in (4 layers). the hole is 6 mm. 100%infill for the best strength.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
I created a Obsidian Flint Necklace for everyone, who love argeology and necklaces :-) This model I created entirely by myself. Whole Obsidian Flint Necklace have dimensions 88 mm x 42 mm x 16 mm in folded state. You can print it all in…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This a decent sized necklace that may be scaled for preference since its a little large. The size is 41*65*11mm. Takes 01:02 to print at .15 Quality, 65 Infill, and 50mm per second. No supports or anything fancy required. I used a skirt…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
This was my first hour with Blender. I figured I would upload it and see how it went
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Dream Big necklace, backpack, keychain for Valentines Day for the kids in your child's class or just anyone! Enjoye!!!
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Useful Organizer for small accessories like jewelry, rings and necklaces. 20mm cylinder diameter for rings Printed with PLA (10% Infill)
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
all you need is a necklace chain
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
U-CHAIN Necklace with locker It is an original print-in-place necklace chain model which includes a locker mechanism. I was able to print it on both PLA and PETG with no support material or brim and 100% infill. I'm using the above model…
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
With this modern, minimalist organizer, you can neatly store earrings, necklaces, and rings all in one place ✨💍. The design offers plenty of room for your elegant collection. The model is printed in two parts (easy to assemble) and has…
Recommended Settings. no supports PLA (must be dry!) 0.2 millimeter layer height 2mm brim or raft 0.1mm Z-Hop + retraction Slow speed 210C Nozzle 60C Bed Infill 50%+ 2 thick walls, or up to 4 walls if scaled-up 4 tops/bottoms Illustration…
A set of floral jewelry. Available with mounting hole at the top of the blossom or included in one of the petals. You can choose from 4 daisy sizes. Dimensions Thickness: petals are 1 mm and 1.5 mm thick the middle is 1.5 mm thick → The…
Check out my new larger version as well ! A simple model of a chain/necklace. Probably helps to use a gluestick/majigoo/nano polymer adhesive and dry filament. I used mostly default settings, .20 layer height, no brim, no supports Small…
Thanos necklace on anything you want
Dolphin necklace A nice little gift which takes less than 30 minuets to print. Uses less than 1g of filament The model is small so unless a printer is set up perfectly stringing can be present. Some time and care after printing may be…
Geralt's Necklace inspired by the Netflix TV series. I tried to achieve the highest accuracy according to the original. Size again estimate (V2 has an inscription on the back) Print instructions I recommend to print on upright with…
Introducing the "Midnight Hunter" Owl Necklace — a 3D printed standout that adds a touch of edge to your festive style. The bold yellow owl head, with intense black eyes and a sharp beak, makes a statement at holiday gatherings. Crafted…
Geo-Cubes linked into a necklace. I created the larger Geo-Cube & posted it here last year. I linked a few of them full-size at that time. I've been experimenting with smaller cubes linked into longer chains, culminating in this necklace.…
This is a simple necklace holder composed of two parts that are easy to print and to assemble using glue. It was designed by my daughter who is willing to share it to the world :D
Necklace display / support / holder / stand by marco_canelas - Thingiverse
Print Info - Any Material Infill 20% or more Print with the top facing up. No supports. Just over 3" now, use slicer scaling to make it smaller if needed.
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.1-0.24(Recommended) Scale it as you like :)
Geo-Cubes are interlocking print-in-place cubic shapes that I designed & posted last year. I've been experimenting with scaling them to different sizes & arranging them on the print bed in different ways to get longer lengths of…
****FINALLY UPDATED to address lame design flaws**** Added threaded couplers to attach the post and post extension together and the post or extension to the top. If the coupler is too big on your print, scale it down a little in x and y.…
Model is sized to just be able to be printed on a Prusa MINI. A fun idea would be to upholster over this model. I personally love the way this comes out in Galaxy filament!
A simple, good looking cross charm for a necklace. Printed with %75 infill on an Anycubic Kobra.
This is one of my first tries at 3D models. The jewelry stand is somewhat minimalist and reminds me of a castle. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width.…
Spell it out, wear it proud! 🎁 This customizable name necklace makes for a truly thoughtful and one-of-a-kind gift. Imagine the joy of receiving a necklace with a name or message specially crafted for someone you love. It's a piece of…
My sister was in need of organizing her necklaces, so she made this. Hope you enjoy :) Print instructions Resolution - 0.3 Infill - 10% No Supports Nedded
A 3D Model of a skull necklace Dagger.
This is the print file for my fabric printed necklace, that you may have seen on the front page Reddit: https://www.reddit.com/r/3Dprinting/comments/8d9fmt/i_3d_printed_a_floating_necklace/ or Imgur: https://imgur.com/gallery/sA6or Or of…
I made a cubic statement necklace a while ago and recently revisited the design. I added more touches to it, cleaned up the edges, gave it additional pieces, and even made matching earrings. The results are this bold statement necklace…
Made this simple necklace holder for my wife. Supports up to 15 necklaces. It can be fixed using screws or double sided tape. Printed in white HTPLA(other filaments should work fine too, PLA, PETG, ABS). It can be printed with the larger…
A pendant remixed from the small 6 holes ocarina, plays well
If you enjoy the model, don't forget to leave a like, it helps me earn points. Thanks! All models are roughly 4-5 cm long. On the photo with two ears, the one on the right is scaled up to 6.5 cm. improved_ear - Has a better pendant hole…
For better quality, use 3D Resin printer. You can use a slicer to change the size as desired. Print instructions Category: Accessories Summary For better quality, use 3D Resin printer. You can use a slicer to change the size as desired.
Display Stand for jewelry, necklaces, bracelets and so on. Print in the orientations used in the 3mf! Parts are pushed together after printing, requieres precise printing.
Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…
After making my magnetic hearts necklace , I thought it would be fun to make a friendship heart version. I eventually decided to make them fit together like puzzle pieces and also added a magnet so they stayed together well. Not as…
We have already printed various stands for earrings and rings. Unfortunately, my wife didn't like them. For this reason, we created this beautiful rotatable and expandable stand together. All modules can be rotated. The individual levels…
sorry for the poor photo, it was a gift and I forgot to document it. This thing is LOUD and sounds horrifying, use responsibly 😅 Prints great without supports, but you can enable them if you're having trouble with the cheeks.
Own design, simple & easy to print earrings & necklace set. Use earring hooks to finish the assembly. Watch out for left & right during hooks mounting. Looks great with gold / bronze filament & gold chain. Print instructions Best looks…
Keychain with design based on the new Deadpool movie. The file includes both parts(both Deadpool and Wolverine). Comes with Loop and without Loop Ideal to share with your friend or your significant other. IMPORTANT: the fit of the pieces…
stl and 3mf files inc 5 variations with 3 different color schemes each totaling 15 hearts can be used as keychain or added to necklace as a charm stl files will be 5 designs as a stl does not save color
Print the first letter of your name and create a very unique custom piece of jewelry. The design is inspired on bionic structures found in nature, the organic model shows the true capabilities of 3D printing. This design pack contains the…
Customized version of http://www.thingiverse.com/thing:28405 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=28405 Instructions Using the following options: links = 50 pitch = 12 type = circular r0 = 20 t…
Beautifully curved holder for chains and jewelry. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week !🔧 Includes STL + Fusion 360…
A Mythosaur skull necklace from The Mandalorian
An easy and fashionable way to keep your rings when you have to work, cook etc. Just slide the ring over the ring keeper (see the video). No need to open the necklace! It also doubles as a pretty necklace wihtout rings. Multicolor…
hello kitty keychain / necklace charm 4 colors all my keychains are layered to give depth with black being at the back so no or little bleed effect check out the rest of my keychain collection by clicking on my profile or this link…
Elevate your jewelry organization with this versatile 3D printed necklace holder pendant display. Designed to accommodate various necklace lengths and styles, this display comes in 12 different configurations, ensuring you have the…
Here is the awesome looking Philadelphia Eagles Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
I've included the print profile as well as the singular items. Printed in PLA. Perfect for tailgating or a decoration for your mancave. I am selling this item on Etsy so please do not post it for sale. I've also included a .3mf file and a…
Here is the awesome looking Detroit Lions Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…
This minimalist 3D printed jewelry stand is designed to organize and display necklaces, bracelets and rings while keeping your dresser or vanity clean and elegant. The stand features two horizontal bars at different heights , making it…
Hi Ryan, Here are two very clean cut model cowl versions of the black panther, but hopefully the Neckless and Claw will be ideal for you and your sons project, Please double check the sizing, as I try to generally make it round medium to…
Arcane Blue Rose Necklace For the pivot use a piece of 1.75mm filament The normal body has the line of 0.4mm so you could print it with any fdm printer Print 2 spacer and and place it between the body and the external Update 11/01/2025…
snoopy keychain / necklace charm 2 colors print face up all my keychains are layered to give depth with black being at the back so no or little bleed effect check out the rest of my keychain collection by clicking on my profile or this…
Print in place articulated flexi shamrock to play with or give as gifts for St. Patrick's Day. There's also a version that can be worn as a flexi shamrock necklace to add to your celebratory St Paddy's Day garb. Prints in place with no…
A buttery necklace, you can resize it. Print it in colorful colors
Resolution: 0.16 Infill: 15% Nozzle: 0.4 mm Remix from lackaffchen - thing:3089967
Model originally uploaded by : lackaffchen at https://www.thingiverse.com/thing:3089967 Merged the two pieces posted into one, for a smoother, one piece finish. Orient the way that works best, I did quick and easy flat lay on tree…
Needed a space-efficient way to organize my ties and belts, so I designed this after seeing something similar being marketed in an online search. The hanger has a carousel that can be rotated to make it easy to consider what kind of…
Cross designed to put on a chain and worn as a necklace. Designed similar to ornamental Greek crosses.
Here is the awesome looking Chicago Bears Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…
Hi John, I did what I could. I've generated some options in the last file where by it will print ok but will need some parts sanded to fit back together correctly. V3 will need a massive amount of support to print where as oprtion 4 wont.…
all my keychains are now free on my end for COMMERCIAL USAGE,any licensed images used are owned by there creators and would need separate approval updating permissions as and when i get time cartoon scooby doo tag keychain / necklace…
Here you can see a simple heart with keychain or necklace ring. Source file to modify in OpenSCAD included. You can adjust the height of the heart when you modify the line “ linear_extrude(height = 10) ”. Feel free to modify it and do…
Show your school spirit with an oversized Michigan State University Spartan Logo Chain Necklace. Perfect to wear to a sports game, tailgating or to graduation! I've included the STL & 3mf file as well. My print settings were: Layer…
This is a remix of Jewelry Holder made especially for necklaces. Please do first appreciate and like the original model from the author of this stand ( @DanielSchenk_545468 ) then you can like my! I strongly recommend using the .3mf file…
cartoon characters spongebob squarepants 6 color and 4 color inc in 3mf file stl also inc print face up
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. This is a simple fast…
You have 2 files : 1 single color with the engraved text “ I love you ” 2 multicolor Choose the best you like it and spred love everywhere!
Print in the color you want and put some ring in the holes upside the wings to attach your chain
The revolving heart is small model consisting of 3 segments printed in place. They can be rotated immediately after removing print from the heatbed. Although you can print it in one color, it is much more handy when printing in two colors…
Here is the awesome looking Kansas City Chiefs Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Print in TPU or other flexible. No supports required, 0.2mm layers or whatever you like. A knot might fit but designed for a flare-melted end on the paracord.
Mushroom Necklace Pendant Mushroom necklace pendant or earrings with printed loop for chain or hoop. If you like what I'm doing here, please consider making a small donation .
The red parts are a bit taller so you can stop at 85% and change filament for the red finish. Enjoy Category: Learning
This a T-bar style jewelry display for necklaces. It can be used at home or to display necklaces that are for sale. The bar is two inches in diameter, eight inches wide and the top of the bar is twelve inches above the base. The base is…
A set of winter themed jewelry. Available with mounting holes. One type of snowflake available, but I'm working on other types, so stay tuned! 🤩 You can print the snowflake in one out of two orientations - with the snowflake “standing” or…
double heart key chain pendant valentines day
For best results use a 0.25 mm nozzle. I tried it with a 0.4 mm nozzle, but the quality wasn't what I wanted. I decided to try a "poor man's" multiple extruder set up. Under Printer Setting, I selected 5 extruders, and checked single head…
Kuromi accessories (Necklace,Earrings,Ring) FB: https://www.facebook.com/3DPPark/ Category: Fashion
🎮 Diseño inspirado en el primer desafío de la temporada 3 del Juego del Calamar Este archivo está optimizado para impresión FDM y puede imprimirse tanto con AMS (sistema de cambio automático de filamento) como sin él. Si no utilizas AMS,…
Wanted to make these for a family member and decided to post them online for everyone to use. They are made a bit larger than normal to give room for larger necks so you can make them a bit smaller if you want. These include: Normal and…
Magnetic butterfly wing jewelry concepted by my daughter--so we could have a matching set, to create a butterfly between us. See the pictures for her original sketch! Hidden magnets in the print create a kissing effect attaching the wings…
I remixed the original taking some of the bones and adding a cylindrical cutout all the way through so that I could use it for a costume necklace. Print Settings Printer Brand: Creality Printer: Ender-3 Max Resolution: 0.08 Infill: 15%…
Here is the awesome looking Pittsburgh Steelers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
A skyrim logo necklace! Original model by: https://www.thingiverse.com/thing:3042456 I basically adapted it to a simple necklace, thicker, added proper support, an attachment point, topology fixes etc... Printing! I included my supported…