Counting matching models…
The Stela of Pasherienimhotep (W1041) is a beautiful limestone stela from ancient Egypt, currently housed in the Egypt Centre collection. It offers valuable insights into the life and career of a high-ranking priest during the Ptolemaic…
Adapter to use Makita LXT 18V batteries in older Bosch 18V NiMh tools. Tested on Bosch 52318 jigsaw. Uses Bosch upper adapter and lock bars by PhNxx: https://www.thingiverse.com/thing:4725237 Requires: 8x M4x8 SHCS 8x M4 hex nuts Makita…
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
This battery sled replaces the standard spring-loaded "6.0v JET TURBO" NiCD battery (all of which are probably dead at this point) with a 5-cell 6.0v NiMH battery which you can find on Amazon , eBay, etc. Note however: The connector leads…
Mrs. Brisby : Meeting Great owl : Secret of Nimh
Simple battery holder for 9 AA batteries and 6 AAA ones. Mine was printed with the letters flipped but model is fixed!
Make your own 7.2V NiMH battery pack for RC cars. You'll need: -6x 1.2V NiMH AA batteries -Some exposed wire for battery contacts (THICKER THAN IN PHOTO) -Thicker wire for lead wires -RC battery connector Size suitable for 1/10 RC Touring…
Read more at: http://www.drracer.eu/3dp/20160225_vortex/index.html (in English)
A little holder for Lipo and NiMH Battery. Instructions Print 0.2mm layer Printed with a bq Witbox Category: R/C Vehicles
this is not designed for FDM printing, so I am not sure it will work if you try you will need to source some nickle strips to make contact with between the battery and the wonderswan's battery terminals. I used 0.1mm thick by 4mm tall…
The original WLToys 12428 came with a small LiOn battery pack. But I want to drive longer and don't want to hazzle around with LiPo's in my household. So I choose a 5.000 mAh NiMH battery block. So here are the steps: print this NiMH…
wallmount to store 3 Hilti SFBxxx NiMh Akkus
Holder adapter for putting smaller LiPos (and warner) into the NiMH slots on RC cars. As my old NiMH batteries died, I modified this adapter so I can safely use some smaller LiPos and a warner in the NiMH slot of RC cars. Note it's not…
SPINC is an Open-Source NiMH charging station that can automatically load and eject AA battery cells. Simply drop batteries into the top of the device, regardless of their polarity. The internal mechanism picks up one cell at a time and…
It's really important to keep track of the charge cycles of your rechargable NIMH batteries when you use more than one in a single device, so they are balanced. For that I needed to sort my batteries in pairs. I designed this holder to…
Print the top and bottom parts, use M4 screws to screws the battery holder shut. Then, screws the holder into another part using the side holes with areas to put nuts.
Dremel 7700 Battery Pack Charge Dock. To be used with a NiMh 6S intelligent charger. I upgraded the worn AA 0.7A NiCd cells in the original battery pack to AA 2.6Ah NiMh cells. There are 6 cells in the battery pack and after upgrading I…
This is a simple model to get access to the power of cheaper lithium batteries to convert second hand and old power tools to better and available batteries. The model is an universal lego-brick to build with. Kept generic to be able to…
Made a simple case for a simple charger. Enjoy! Top: Depending on how much light you want to shine thought the cover there are two tops to pick from, Pictures attached are V2 with the 1.2mm holes…….. Version 1 - Holes above LED's = 2mm…
If You need to replace an 14,4V SUB-C cell package, this spacer may help. 14,4V means 12 cells. Each NiCd with 1,2V in normal use. BUT the first mAh, the cell provides 1,5V. (NimH is also close to 1,55V) So 12cells*1,5V=18V … The tool…
Replacement Batteries are expensive and of low battery quality, so I decided to make my own using off the shelf cheap AA NiMH 1,2V Batteries. They are like the original cells but a bit longer, so I had to redesign the shell. I used the…
The original file by buffdaddynerf was designed to use Sub-C sized NiMH packs, which I didn't have. But I did have some of the more common 8xAA sized cell packs, so I modified the model to work with them. In my testing with a Khaos and…
Summary Replacement battery end caps for 7.2v NiMH and NiCd battery packs. Due to variations in battery cells and cell insulation this might need scaled for your specific application in your slicer program before printing. Print Settings…
This archive includes the safety covers, as well as a model for a mounting bracket for storage convenience. These are for the early 2000's era Ni-Cd and later NiMH slide-style packs used by Milwaukee & AEG prior to the current Li-ion…
I took one of my extra PCB's for BigClive's Simple AA Charger and modified it to accept AAA battery holders. I've designed a template to drill the holes needed to use the smaller holders as well as a modified version of my case for the AA…
SC or Sub-C Format NiMh Battery Holder (22mm diameter) 15 Cells 1.2v each. For 22mm Cells x 45mm
Trickle charging 9V NiMH for longer times is not recommended. In my example, I have an input USB-C → switch → boost module → resistor → led → battery slot. Voltage and resistance is set for optimal (lower) current during charging and very…
A protective TPU Cover for Makita NiCd/NiMH Batteries. To be printed with TPU filament!
— for english please scroll down -- Kunststoffteile für meine Batteriehalter-Leiterplatte für das kleine Tektronix-Oszilloskop 222, 222A, 222PS und 224. Je ein Exemplar notwendig. Details und Leiterplattendaten unter…
Seeing as the Nerf branded rechargeable battery is no longer made or available for cheap, let's make our own, using a Sub-C NiMH pack. Needed: 7.2v or 9.6v NiMH pack Matching connector (2) 20mm stamping blanks (copper, nickel, nickel…
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
