Counting matching models…
Holder for RO 90 sander or any other 90mm sander with hook for hanging powercable. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Any PLA or PETG Any Notes: Vertical shell…
Original box is some kind of genious. I cannot work with F3D, so I used TinkerCad to fit this nice box to my Multimeter Voltcraft No91. I added the Voltcraft logo and printed it on my MK3s with MMU2s. You can also print it without MMU,…
This is a replacement divider for the hard shell camera case that comes with the Hero9. 3 slots for the secure pins, 3 spare battery slots, camera grip, and spot for spare detachable accessories. I added some felt to the bottom of the…
Fit for Wizz #8 Racing Frame https://wizz.store/products/wizz-8-racing-frame • Foxeer Predator Nano 5 • HDZero Nano 90
The GoPro Mount should keep the camera secure without any velcro or rubberbands. I would still recommend to put something arround it, if the fit isn't as snug as in my case. I usually use that mount for cinematic FPV flying, cause it's…
A basic, minimalist battery holder for GoPro hero9 & 10 batteries. I have 4 batteries, there is always one in the camera so I only needed a small container that would hold the other 3. And, hey, I have a 3D printer so why wouldn't I make…
Meet Iris and Sweet Pea. iris is based very loosely based on single fairlies and Sweet Pea is based on Renishaw No.4 and the Kirklees Light Railway's Owl. iris runs on a Kato 11-109 and Sweet Pea runs on the Kato 11-105.
Case for gopro9. Have to be printed on side. I had trouble printing it so designed additional platform that should be cut away afterwards. Printed from flexible filament with flexibility: 40 For this modes used quite a lot supports and…
original model: https://www.printables.com/model/310818-splatoon-squid/remixes
A replacement for the fragile Suunto 9 Baro 24mm band. I used Pxmalion Flexible TPU. It's a little tight when you put it on your belt, but do your best.
a more useful insert for the standard HERO9 bag. Features space for 3 batteries, 1 dual battery charger, 4 sim cards.
I have shortened the depth of each of the holes in order to make it easier to remove the bits. Printed in TPU.
Rigol DHO 800/900 Abdeckkappe hinten Jede Kappe kann separat weggeklappt werden. Filament: TPU PLA oder PETG geht nicht, da das Teil beim einsetzen gebogen wird. polymaker polyflex 95a
With support on build plate only.
With this clip, a TO-92 IC e.g. the DS18B20 sensor can be used as a mooring sensor. It improves the mounting by means of cable ties.
I am not the author of the model, but love the design! I printed the full set and it works perfectly. Many thanks to the creators! Credit to archipelagourbanfarms for the original design of this system: Modular Hydroponic System Credit to…
orchid is another member of the "flower" family of locomotives, based loosely on the Kirklees Light Railway's Fox.
Meine Kinder haben nach nicht einmal einer Woche die Originalschachtel leider mit Wasser unbrauchbar gemacht. Und nachdem es die Box mit Logo noch nicht gab, hab ich das Logo Nachgezeichnet und im STL gebracht.
This covers over the logic analyzer (LA) connector on the front of a RIGOL DHO900 oscilloscope to protect the pins. Tolerance is close. If needed for snugness, increase the length a little in your slicer. 12/21/2023: Added A TPU version…
This is a small test print so that you can test your printer / choice of material's tolorance when chosing to print Aikano9's inserts (as of 14.09.23). It may work for other models that use the same inderts but your milage may vary. L =…
Rigol DHO 800/900 Abdeckkappe front Die USB Kappe kann separat weggeklappt werden. Filament: TPU polymaker polyflex 95a PLA oder PETG geht nicht, da das Teil beim einsetzen gebogen wird.
Canopy that fits the upgraded lens for the nano 90 camera
This is a universal probe holder for the RIGOL PVP3150 passive probes that come with the DHO800 / DHO900 series oscilloscopes. The probes are held securely in place with a satisfying snap. Other probes with a diameter of around 10.5 mm…
diesel and euro95 tags
if you want other phone's CAD, put it down in the comments and I'll try my best to make them~
I made this box to keep my playing cards organized. Box Measure 93x62x39 mm ONO99 cards pack measure 87x56x32 mm I left a bit of space inside for instructions booklet -- feel free to ask me for a modified box of different size
I had a hard time removing the PolarPro Shutter Collection nd filter from the GoPro Hero 9. The Tool helps. Printed with PLA. Category: Other
The Kaha is a frame I designed, designed to be a super strong durable drone racing frame which is cost-effective, runs 30mm electronics if you like and protects those electronics. Kaha translates to strength in Te Reo which is the…
Stand for the Lenovo Yoga Pro9 16IMH9 Laptop. Print in 1 part (PETG or heigher temp. material). Usefull when using photogrammetry or other high demanding applications. The stand increases the clearance under the intake of the CPU and GPU…
inspired by a mix of the Redwater Creek Railway's Ruston 20DL in Sheffield Tas, and Ivy from the Ivy Railway in Wales. but in 15" gauge in British O scale I made the rivets a bit oversize looking but I was too lazy to fix it so I just…
4.3U 19 inch rack front panel mount for Rigol DHO800/DHO900 oscilloscopes These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 4.3U apart. Print the two halves of the front panel…
Adjustable fixed angle camera mount for HDZero Nano 90
A holder for carrying the PVP2350 probe from Rigol's DHO900 and MHO900 oscilloscopes. I recommend using PETG because it's more flexible. There are no special printing requirements and support isn't particularly necessary. I only recommend…
An O9 gauge tipper wagon for 15" to 18" gauge railways.
Mounted onto the accesspanel for the pipes, (which is metal) with strong magnets. Works like a charm.
Hibiscus and Lavender are two estate locos made for the Bachmann Rheneas chassis.
My GoPro Hero9 / Hero 9 Mount for the Armattan Marmotte or Badger. Let me know what you think. This ist the full protection version. I've uploaded also a light version. Category: R/C Vehicles
Updated version. Source is available and patch welcome !
Haven't printed this myself. its just proto9 with organized part placement. can be printed on 90x90mm beds with ease (intended for sovol sv06) but parts can be moved around to fit a smaller bed, would love to see someone make a Runner…
My light version of the GoPro Hero9 / Hero 9 Mount for the Armattan Marmotte or Badger. Works for me. Let me know what you think. I've uploaded also a full protection version. Category: R/C Vehicles
this is a work in progress project to replace the old analog dashboard with the digital dashboard DO908 from Sino Tech. The left round add on Display is not working yet but it is needed to display the fuel level. The adapter connectors to…
Made for the Kato chassis because it's cheap and readily availible and made in british O scale so UK modelers can use her for for post Bush Mill condition at the CCLR. DA 1 was built at the Bush Mill Railway in 1986 as a diesel powered…
Based on the Kirklees Light Railway's Badger, made as a tram for the Kato 11-109 and changed to an 0-6-2 to make use of the axel box detail on the Kato chassis.
A simple buzzer mount for the Tyro99. Gets the buzzer as low in the frame as possible. Mounts with standard screws. Takes a standard 5v buzzer Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2…
I wanted to mount a pigtail antenna holder on my Eachine Tyro 109, so I designed a mount for it. There are two variants: Variant 1 Here you have threads for M2 screw to fixate the pigtail holder. Variant 2 In this variant you have to use…
The Bush Mill Railway had a rake five 16 seat semi open coaches. They ran on the railway from it's opening in March 1986 until it closed on the 30th of June 2004. The coaches went unsold for two years until being purchased alongside…
This model is a VESA spacer/adapter designed to be placed between an oscilloscope and a VESA mount plate . This is modified version of this model . Both models have the same mounts VESA75->VESA100 and look similar, but I tried add more…
This is a remix of the Hippo215 camera protection. It's been fed a few pies to bulk it out a little for some more protection when fitting a better camera to the Tyro99 (Tested using a Runcam Eagle Micro). Will also protect the standard…
www.robo90.com adllı e-ticaret sitesinin 3 renk olarak tasarlanmış Logo Çalışmasıdır. Logosunda bulunan Beyaz - Siyah - Açık mavi renkleri oluştura bilmek için değişik yüksekliklerde olacak şekilde tasarlanıp sırası gelen katta filament…
basic, no frills. petg is an option
After trying a print from thingiverse: https://www.thingiverse.com/thing:3792789 I found that it did not fit the Nano90 - so I then edited the print to be able to fit the nano90 but also added longer legs and a slot to allow the camera to…
Holder for 3 Oral-B iO9 with room for charges at base. Import all as one piece.
I wanted to measure the temperature of my radiator, which is made of iron, so a magnetic mount was perfect. It fits TO-92-sized electronic components. In my case, I used a DS18B20 temperature sensor. Simply add a pause before covering the…
I just added 4040 rail mount from , 4040 V Slot Mount for other designs by FullApature Print Settings Printer: Mingda Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: Jessie PLA Category: 3D Printer Accessories
Made by "КБ ЖАБИЙ ПАЛЬЧИК" Airsoft bb defense for go pro 9-13 (or newer if sizes are the same) required 4 m4x30 screw & m4 nut. 37x36x2mm glass or transparent material to cover the lens 4-5 WALLS AT LEAST
toothbrush stand - OralB io9 Category: Bathroom
The Bush Mill Railway had a rake five 16 seat semi open coaches. They ran on the railway from it's opening in March 1986 until it closed on the 30th of June 2004. The coaches went unsold for two years until being purchased alongside…
orchid is another member of the "flower" family of locomotives, based loosely on the Kirklees Light Railway's Fox.
Haven't printed this myself. its just proto9 with organized part placement. can be printed on 90x90mm beds with ease (intended for sovol sv06) but parts can be moved around to fit a smaller bed, would love to see someone make a Runner…
I wanted to measure the temperature of my radiator, which is made of iron, so a magnetic mount was perfect. It fits TO-92-sized electronic components. In my case, I used a DS18B20 temperature sensor. Simply add a pause before covering the…
This is a universal probe holder for the RIGOL PVP3150 passive probes that come with the DHO800 / DHO900 series oscilloscopes. The probes are held securely in place with a satisfying snap. Other probes with a diameter of around 10.5 mm…
This model is a VESA spacer/adapter designed to be placed between an oscilloscope and a VESA mount plate . This is modified version of this model . Both models have the same mounts VESA75->VESA100 and look similar, but I tried add more…
12 & 6 inch shelves for displaying HOn30 & OO9 model trains. Multiple shelves can be aligned to each other using 1/8 X 2 inch pins (stainless steel is recommended). Can be attached to the wall with drywall screws or stacked on top of each…
A simple cover for the wires atop the arms of an Eachine Tyro99 kwad. Attach with two zipties. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.20 Infill: 40% Filament: Prusa PETG Orange Notes:…
This adapter can be used with fans having a body diameter of 21mm or less. To use it, cut the fan from the frame, trim the existing supports back to the body, then glue the body into the printed part with a dab of superglue (or your…
