Counting matching models…
This is a connector cover for a Bluetooth OBD-II scanner. No support material needed. Might require minor scaling (I printed it at 100% and it fits just right for me). Support If you'd like to support me for the 3D models I distribute for…
I didn't find any covers for obd connector. Since my car didn't have one, I designed it myself. Other one is blank, other has OBD on top. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't Matter Supports: No…
Hier ist der rote Kragen für den OBD-Stecker eines Hella Gutmann Mega Macs 50. Der rote Kragen des ST2-Kabels (342509) auf der Seite des OBD-Steckers bricht gerne ab, daher gibt es hier die STL als Ersatz. Das Teil wurde leicht angepasst,…
These are two housing designs (long and short) for OBD II connectors. Requires no support material to print. The long housing has room for an OBD2 connector on one side, and a USB Type B Female connector on the other. The short housing is…
Simple slip-on cover for the Hex GS-911 OBD-II port cover. While the device comes with a carry case, this might be useful for those looking to minimise space taken up on an adventure. This is a snug fit; if the tolerances are a little out…
print in petg preferably the .3mf file has variable layers so the text prints fine quality, the rest of the cap in draft
This is a custom case that fits most general purpose OBD2 plugs and has standoffs that fit ESP32DevKit1 boards as well as the MrDIY CANBUS Shield. The case has small holes for accessing the reset/programming buttons, USB Port and LEDs on…
I made a holder/bracket for the 3A0972695(A) VW OBD socket used in most VAG cars. Fusion 360 file included so you can modify it for your needs.
Here's a printable replacement BMW E30 OBD1 Cap catch tie. Mine broke so I approximated & reproduced the broken tie but increased the overall length by a bit. The printed tie works for me so far. YMMV. Ver 1.2 - Jan 2024. Minor…
It's a cover for Renault Megane 2 obd2. Its also adds a usb charging port.
Der Anschlusskopf eines OBD Stecker. Falls der alte abgebrochen sein sollte z.B.
Ersatzgehäuse für einen Gutmann VCI OBD. Bestehend aus 3 Teilen: 1. Gehäuse für die Platinen 2. OBD Anschlusskopf 3. Optional eine Gummihülle
Holder for your OBD2 dongle. Version with Snap-On logo Version without logo Buy me a Coffie
Made this remix for my Autel OBD2 Bluetooth Scanners -AP200 -AP200M Fast Print no supports need. You have 2 versions ( CutOut or Full ) Files can be found in the files tab, leave a like and a rating , helps a lot!
This is a remix Of the “Tool box parametric'' by ‘’yanev'' made for the ObdEleven Nextgen scantool. With inserts for the scantool, with a nice logo on the lid. I printed the inserts in TPU 95a, but all materials work.
This mount allows you to have an OBD2 Gauge inside one of the vent of your MX5 MK2.5. I recommend using the driver side vent which is right above the OBD2 panel to root the cable behind the dash. I still need to find a solution to modify…
Introduction The original was posted by me at https://www.thingiverse.com/thing:3368589 but this one is a newer one. Models In the folder ‘original’ the files for the original are found. In the folder ‘With OBD opening and cover’ a…
My OBD2 diagnostic interfaces were always lying around in drawers. So I made a simple wall bracket. print with 20% infill 0.4 nozzle petg fillament.
OBD2 PROTECTOR SECURITY PROTECTION SECURE
A imprimer à plat pour une meilleure résistance. Réalisé il y a 2 ans, toujours en place !
you need 6x m3x20/16 screws. 20/30% infill.
Jehlan s podstavou ve tvaru obdélníka. Vytvořený v GeoGebře 3D.
Support pour lecteur OBD type “ELM 327” pour mettre sur un support mural Pegboad Kupper
Simple slide-on cap for OBDeleven next gen. The model comes in three tolerances. I use 015 and it should fit. I recommend printing from PETG If anyone has a problem, they can use 02 with a larger tolerance or 01 with a smaller tolerance.
Man benötigt noch 6x M3*30 Schrauben. Das Feld neben dem Dongle ist für eine Beschriftung vorgesehen. (Benutzername, Passwort etc.) Alternativ kann auch Schaumstoff für den oberen Inlay verwenden. Der druck ist leider nicht perfekt…
na kuchyňskou linku a nebo parapet okna jak svořené
This case was designed specifically for an OBD scanner model Zurich ZR4s, but may fit other models with a similar form factor. UPDATE Jan. 7, 2022 : I added a “label” print (see photos) - simple glue on label to identify the contents as…
If the OBD connector falls out on one side, here's a simple fix: just slide the small wedge in between, and it will hold in place again.
Toto je model OBD 2 zástrčky podle které jsem teprve vytvářel víčko s bočním výstupem pro vodiče.
K jehlanu jsou přidány stěnové výšky.
I recommend printing this in TPU. The fitment was very tight, but holds snugly. Before posting, I wore it on a lanyard for 3 weeks and it's been holding up wonderfully.
Print in one color or two. To print in two colors you have to split it into objects first, but I guess you already know that ;) I use 0.25 as my first layer and 0.20 for the rest witch equals to 3 layers for the text. Use as is or add a…
Replace plug cover forOBD 6-pin with a hle passthrough for cable that activate a device on your motrocycle
I modeled this to wall mount my IMclean® DAD system i printed standing 4 walls. pla is fine. thanks if anyone prints or download this.
Easy to Print 110.63mm x 200mm, 2mm thick. Prints in around 3hrs on my Geeetech A10T. For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts…
This is a custom insert for the Alfa Romeo 159 central air vent. It integrates an OBD2 digital display (tested with NEXPEAK A205 and should work with Autool X60 ), allowing you to monitor parameters such as speed, fuel consumption,…
Loosely based on the PI card deck case by dktosoch on thingiverse (https://www.thingiverse.com/thing:2844013) this is a completely scratch modeled design that incorporates space for an OBDII connector at the rear and a seed studio CAN-FD…
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
Kryt pro diagnostický konektor OBD II vidlice PIN:16 MINITOOLS Originální symbol: SEP-A-OBD-E2
A pegboard holder for the AMTIFO OBDII Code Reader. Print with supports. Yes, I definitely should have dried my filament before this print! Designed for this one from Amazon, but may fit others: https://www.amazon.com/gp/product/B09TQCLDCZ
Tired of playing tug-of-war with your car's dashboard? The OBDLink CX is a fantastic tool, but let’s be honest—extracting it from those deeply recessed, narrow OBD2 ports can be an absolute nightmare for your fingertips. Say goodbye to…
Since I use the "breeze" auxiliary fan on my Voron 2.4, I couldn't mount the blobifier on the side. So I came up with another solution that can be mounted on top, doesn't require any "shake," and moves the blobs with a shield. The blobs…
A gridfinity bin for OBD Eleven and other J 1962 connector scanners
Case for the project at https://github.com/cheeseprince/obd-gauge-cluster You will need to print 1 of each file in a heat resistant filament (PETG, ABS). I printed mine in PETG-GF. You will also need (8) M3x4x5 heat set inserts, (4) M3x10…
I recently designed and manufactured this case for my (H)yper (T)ough 300 OBDII that I purchased from Walmart for under $50. As you can see I have provided a little cheat sheet on the front cover of this model, when you run a code you…
Cílem projektu bylo vytvořit modely husitských zbraní, které se následně dají používat jako ukázky zbraní ve výuce dějepisu k tématu husitství.
DO NOT OBSERVE THE SUN WITHOUT PROPER PRECAUTIONS! Make sure you're using a safe filter. Ensure the filter and the aperture reducer cover is secure to the telescope, otherwise you risk damaging your camera, telescope, or your eyesight.…
It's a cover for Renault Megane 2 obd2. Its also adds a usb charging port.
Remove the OBDII socket from the housing and insert it at a 90-degree angle using an adapter. Now you can close the fuse cover and have the scanner permanently installed. Use supports and 0,2 mm layer height.
Tired of playing tug-of-war with your car's dashboard? The OBDLink CX is a fantastic tool, but let’s be honest—extracting it from those deeply recessed, narrow OBD2 ports can be an absolute nightmare for your fingertips. Say goodbye to…
A imprimer à plat pour une meilleure résistance. Réalisé il y a 2 ans, toujours en place !
A cap to protect obd2 connectors. The connector does have less surface area contact compared to other models. I'm hoping this will make it easier to remove. I also designed a slot on it so you can fit something in between to pry it off if…
Recreation of a tablet holder I found on here. Wasnt thick enough for the rugged case on the Otofix. This is specifically designed for the OTOFIX D1 Lite OBD2 diagnostic scanner and bluetooth module, but its modular layout will allow it…
Numbers on inside of the cover. 7 145 700 Germany ABS 112 420 5143 1-07078
I have the Ross-Tech VCDS cable and it gets dirty in my garage so I created this in Tinkercad. I had to redo it recently as when I attempted to print, it didn't fare well. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Vytvořeno pro co nejrychlejší tisk. Tedy doporučuji 0,3 draft setup. Nastavte výměnu filamentu pro odlišení textu od podkladu.
You can found the instuction for assemblyng here: https://www.instructables.com/id/OBD2-Ultra-Slim-Extender-Mod/ Print it using ABS at 0.1 z-resolution Category: Automotive
The OBDII socket hole is designed to use the OBDII socket from a Volvo 960. The original ashtray front trim piece needs to be removed from the original ashtray and attached to this one. Some trimming may be needed on the side tabs to get…
I worked with the original creator on this. I was able to get the original file and modify it to fit the new OBD11 tool (The black one) First Layer Speed: 10% First Layer Nozzle Temp: 270C Other Layer Nozzle Temp: 260C Bed Temp: 100C…
A simple cover to put on your OBD-II reader when you are not using it. Compatibility I use this with my ‘Veepeak’ generic reader from Amazon. It should fit other devices, as it is designed around the OBD-II port specification's…
