Counting matching models…
Who wouldn’t want to own a car as legendary as the Škoda Octavia? Its appeal is reflected in the more than 7 million units it has sold, and the fourth generation is no exception. Its success is built on a clean, timeless design,…
Who wouldn’t want to own a car as legendary as the Škoda Octavia? Its appeal is reflected in the more than 7 million units it has sold, and the fourth generation is no exception. Its success is built on a clean, timeless design,…
Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siloconu.
prints on side with no supports at 0.2 layer height
Odkládací prostor pro škoda octavia 1.
Oprava poškozených lamel u zadní ventilace Škoda Octavia 2 Po drobných úpravách pravděpodobně i pro další vozy. V případě zájmu upravím potřebné modely. EN: After minor adjustments, probably also for other cars. If interested, I will…
This is a Skoda Octavia 1U remixed from Thing I verse making significant changes to windows lights and other parts of the car. Link to original: Škoda OCTAVIA by DaWag - Thingiverse Happy printing!
Keyring with Octavia logo Category: 3D Printing
This is phone holder for Skoda Octavia I. It is meant to be mounted as replacement for blind buttons. Two versions are available. One with integrated USB charger and one without. I used simple custom board with usb connector and cheap…
The clip (1Z0857561) for my sun visor in Skoda Octavia 1Z broke and I wasn't able to find a matching replacement part online. Luckily there is already a fitting model on on Thingiverse but it is slightly higher than my original part. The…
A remix of the phone holder for Skoda Octavia III (year 2019). The original model works and fits quite well, but it obstructs the entirety of the cars cupholder and makes placing of even 1 cup impossible. The remixed model preserves the…
Skoda Octavia II panel button replacement for USB port. I created two types: The first for a standard type of USB connector that can be purchased at an electronic parts store intended for charging purpose only. The second one is…
TLDR; Fixes your handbrake button on Skoda Octavia (and maybe other VAG cars) if it popped off, and won't stay back on. (Updated 2024-07-04. User gon on the below forum informed me that the tip was 1.5mm too long. I've removed 1.2mm, and…
I needed a way of fitting aftermarket speakers in the front doors of a Skoda Octavia 2 so I came up with these adapters. They'll allow you to fit standard 17cm/6.5" speakers at the same height as the originals. You'll have to drill out…
Redbull Halterung für einen Skoda Octavia (2017)
Dieser Rastzapfen bricht ganz gerne bei der Kofferraumabdeckung des Skoda Octavia ab. Die Datei ist für einen rechten Zapfen. Wenn du den linken Zapfen benötigst, spiegel die Datei im Slicer einfach. Dann passt das Modell auf der linken…
Total redraw of the 2 phone holder I found on Thingiverse but don't fitperfect on my Skoda Octavia 3 Scout. The shape, the slots for the phone and for the parking card or credit card are redraw I have added a slot for caddie coin and an…
I designed organizer for center console storage box. It fits to skoda octavia 3 after facelift (2016/2017+) It designed in two versions with dividers and without.
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
He diseñado este rascador de hielos para mi Skoda Octavia III con el logotipo incluido,que se guarda facilmente en la tapa del deposito de combustible Supongo que puede servir para todos los modelos del grupo VAG Aunque lo he realizado en…
This is a holder for the Skoda Octavia 2020-2024. It gives you a flat mounting spot for a phone holder or other things. I have used some double sided tape to lock the holder to the dash
funnel for skoda octavia 3 (windshield washer fluid) or other with hole bigger than 40mm. Printed with PLA and brim (no spports)
Návod pro demontáž dílu a instalaci lopatky najdete zde , nebo jako PDF v příloze Complete instructions for the part disassembly can be found here , or as PDF in included files section. Printing Recommendations: Print in original…
designed a perfect fitting inlay print the TPU inlet with hilbert curve with no top layer to make sure your stuff dousnt slip around
I designed this replacement for Skoda Octavia 1z5 station wagon, since the old ones were brittle and broke. Printed in PLA, 0.2mm. You should use at least PETG though. ____________________________ The trademarks Skoda and Octavia are not…
USB charger for Škoda Octavia (first generation). Is a empty button (1U0 856 179 D) replacement on central panel. Build note: Use material with high temperature resistance. The usb board needs to be glued into the groove with melt glue.…
Keychains of Skoda Auto cars included Skoda Octavia, Skoda Superb, Skoda Fabia, Skoda Felicia
Upravený držák na nápoje Octavia 1, dvě plechovky mi nevyhovovaly malý průměr na hrnek na kafe, přidaná přihrádka na žetonek na košík , na tic tac, propisku a různé věci. Průměr 7,2cm
shopping cart token with Škoda octavia motifs / žeton do nákupního košíku s motivy škoda octavia
I printed it with PLA but recommend you PET-G because of high temperature during summer. I bought this car panel and used the sockets. https://allegro.pl/oferta/gniazdo-zapalniczki-12-24v-2x-usb-woltomierz-14057706095
Adapter to fit a slightly larger cup in the cup holder in my car. Dimensions: Base outer diameter bottom: 63mm Base outer diameter top: 71mm Base height: 68mm Cup inner diameter bottom: 72mm Cup inner diameter top: 80mm Cup height: 80mm
When you detach your trailer hitch you end up with a lot of grease in your hands and eventually everywhere you'd like to put it (most likely in your trunk). So print this cover and your fine putting it away without covering everything in…
About I've made this to replace missing knob that holds string in my Skoda Octavia III trunk. Installation To install the replacement knob, apply force to the pin while simultaneously pushing it against the hole; it should pop into place…
A phone mount for the Octavia 3 that attaches around the air vent. It is compatible with standard phone mounts featuring a 17mm ball joint. With minimum supports. I recommend printing these parts separately to achieve the best results…
Simple clip for routing the cable from the USB port to the wireless charger.
REDUCTION FOR A COFFEE CUP FOR SKODA OCTAVIA
I designed this adapter for soft drinks mainly for skoda octavia 3, but it could works with other cars. You can find two versions - for 250ml ("red bull" ) or for 330ml (soft drink) can
Installation : It is necessary to uninstall the console: 1. Remove the ashtray from the center panel (pull upwards). 2. There are two screws under the ashtray that hold the center panel, unscrew them. 3. Remove the center panel, turn it…
Tisknul jsem z černého TPU. Jelikož jde o náhradu gumového “proužku”, je nutné použít flexibilní filament. Pro maximální pevnost jsem tisknul se sedmi perimetry - čímž jsem jednak eliminoval nutnost řešit infill a “druhak” jsou všechny…
Mezi sedačky pod loketní opěrku
Škoda Octavia keychain 72x23x5 mm. Sedan or combi. Print Settings Printer Brand: Prusa Printer: i3 MK3 Infill: 25 Category: Automotive
Skoda Octavia NX (2024) - front compartment Due do a lack of storage compartment at the front, I designed this compartment. Since I don't have a compartment for sunglasses (panoramic roof), this is very helpful. The compartment is 20 cm…
Keeps your vape plus few coins and more. With cutout for the charging cable. Could be a bit tighter. Still better than rattling in the cup. Will probably fit VW/Seat etc. (not confirmed yet). V3 - Gives you the option to put it in…
Skoda Octavia Keychain The model includes two versions for easier attachment to keys: 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
added version with rain cover Drop-in adapter ring to mount 6.5″ (165 mm) aftermarket speakers in the front/rear doors of the Škoda Octavia A7 (5E) while keeping all OEM mounting features . It reuses the factory push-clips , accepts the…
Ventilation exhaust control handle made according to original part due to broken latches. I suggest to print it on a side with supports as it is the best option for strength of print.
My take on an insert for the Skoda Octavia 3 cup holder, takes 2 phones of max 14x73mm (used for Sony Xperia 5V with case), STEP file available to edit for other phone sizes. Files for both the full and half size version keeping the full…
Simple model of skoda octavia mask. Model is made to print MMU in multiple layers
Tištěno na tiskárně Prusa MK4S Materiál: PETG Celková doba tisku včetně krytky tažného zařízení je 3h. Nastavení podpěr - pouze na podložce
odkaz na nabíjačku podpory: ano vypln 100%
As probably all SKODA owners realise very quickly after purchasing the car, the integrated Qi charger is useless… It never works and if it somehow does, it overheats the phone. Furthermore, when you put your phone there, you cannot see…
The OEM cup holder organiser from Skoda had 2 faults - the phone slot was too tight for my phone (S23 Ultra with a cover on), and it blocked part of the remaining cup holder, essentially rendering both centre cup holders unusable. I tried…
Phone and tablet holder 2 in 1 for Skoda Octavia 2 Facelift 2010 dashboard compartment, the holder has two arms that lock around the compartment door hinges, you can easily install and take it off with one hand motion. I forgot what…
LEGO ŠKODA Octavia Cabriolet
Cuplík na zavesenie pláta do kufra auta Škoda Octavia. Vyskúšané v jednotkovej a trojkovej.
For 1x500ml, 1x250ml + vape
Pre veľký záujem som sa rozhodol tieto súbory predávať. môžete si ich stiahnuť na tomto linku. Ďakujem za podporu. https://www.printables.com/model/1238353-mounting-for-service-lift-8p0802847 Info ku zástavbe pre Octaviu 2…
Octavia badge for Škoda Octavia Mk3. Model is slightly bended to achieve better fit. I also have Škoda badge in same style on my profile Printed on SLA printer
Skoda Octavia with seperated wheels in TT, railway moddeling scale (1 : 120).
Rear wiper stopped moving because teeth on the spur gear got damaged by the metal worm gear. If you're able to disassemble the rear trunk to release the wiper motor and the gear, the installation of the new gear is easy. While…
Rámeček na dvoudinové rádio škoda octavia I.
Cookie cutter in the shape of legendary Octavia MK1 in two sizes. Print from PLA. Make sure that your cookie cutter is food-safe :-)
1U0 823 397 121 supported vehicles: SKODA OCTAVIA I Facelift, OCTAVIA III FABIA 3 , 4 KAMIQ SCALA print settings material: PETG infill: 20% supports : YES
Thanks to the fact that my original can holder broke, I was able to print my model there, which consists of two parts. I used PETG, for strength in the car. The original Handle next to the handbrake, I disassembled down to the last screw,…
Skoda Octavia 5e Blindstopfen Anhängerkupplung
Trunk badge in graffiti style. I have another model with Octavia on other side. Model is slightly bended to better fit Printed on SLA printer
I've printed it with PC, but I'm sure that PETG would work maybe better
Let’s be honest — the original cup holder in the facelifted Octavia III is… fine. But “Simply Clever”? Not quite. This model fixes that. And this time, it actually is clever. 🚗 What makes it different? Unlike most solutions, this holder…
M8x1.0 Nut For headlamp Octavia 1Z (nFL) Print Settings Printer Brand: Anycubic Printer: All-metal Mega **Rafts:** Doesn't Matter Supports: No **Infill:** 90-100% Category: Automotive
Please click ❤LIKE❤ if you appreciate my work 😊 The modest icon of the ‘90s – now as a stylish wall piece. This 3D printable model of the first-generation Škoda Octavia captures the clean, timeless profile of a Central European classic.…
Der Adapterring ist für Ground Zero GZUK sollte aber für die meisten anderen 16er TMT ebenfalls passen. Mit normalen Ringen hat man bei dem Octavia das Problem des Wassereinbruchs. Achtung! Bei der Montage am besten die Lautsprecherkabel…
Krytky pouze hladké - přilepeny kvalitní oboustrankou - tisteno na skle Covers - use with doublesided tape-printed on glass
If you like my work, feel free to support me on https://buymeacoffee.com/makerofchaos or on polish version: https://buycoffee.to/pio-treklaguna Thanks
Optimized wheel bolt cap that fits on budget secure bolt. This one tries to look like the original bolt cap, but keeps as much space for the head as possible.
I created skoda octavia wall line art model as decoration
octavia 1 pro držák mobilního telefonu , octavia 1 for mobile phone holder Material : pet-g carbon fiber prusament Edit: v létě ve velkých vedrech na přímém slunci se ohnul... Poté vytištěn z filamentu PCfiber carbon a ten drží bez…
Ein Trenner um das Fach in der Tür zu unterteilen. Ich habe noch etwas Filz auf der Innenseite angeklebt - sitzt mit Druck und kann aber auch noch verschoben werden.
Armrest opener for Oactavia 1, printed from ASA laying down on curved profile for best strenght. Works perfectly for me, I use it in car for over a year now. Tlačítko loketní opěrky, tisknuto z ASA, otočeno na oblou stranu při slicování…
Print with TPU !!!! If you lost your fluid cap just print it :)
gumová krytka prahů pro díru 30mm, Škoda Octavia 1
Tištěno na P1S s AMS Přední strana 100% výplň zadní stačí na 20% 0.4 tryska
Printed using PET-G in two colours for better resistance to heat from the sun. Glued to the board with double-sided cardboard. Bumper: https://a.aliexpress.com/_mqi29Os Cable (1m): https://a.aliexpress.com/_mrezl8k
New lamella (slat) for back seats air vent outlet (Skoda OCTAVIA MK3) to repair 2 damaged pieces. 2 sizes. See the photo. Printed from ASA, 0,15mm layer Sanded after printing.
Držák mobilního telefonu a drobných předmětů do prostoru pro nápoje v Octavia III, pro telefony, které se šířkou nevejdou do originálního držáku. Pokud použijete PLA, tak je možné, že se držák v létě trochu deformuje, ale nevadí to.…
A friend asked if I could make a replacement for the head restraint adjustment button for his Skoda Octavia Mk3 Estate (original was lost or broken). An hour or two with calipers and FreeCAD later (and a couple of hours printing and then…
Speaker pads allow you to replace the original factory speakers with new, higher-quality ones. Original speakers often have an atypical shape or mounting that does not comply with the DIN standard. With speaker adapters, new speakers can…
Handyhalterung wird über den Pannenblinker geklebt Magnetring von Aliexpress
Дефлектор для Skoda Octavia A5 2010 года.
A holder for your phone in front of the AC vent When your running AA/charging. (phone model s24 plus or 161mm in length)
It is recommended to glue together during assembly.
Hello, I create holder for my Octavia 3 key. I printed it from PETG and insert is from Flex
Outline of Skoda Octavia mk3 RS
pause the3d printer and change the filament to have multi color on normal 3d printer. (push the fillament in until you have clear colour)
