P
PrintablesXanderDogg
Gridfinity OLIGHT Arkfeld Ultra insert
I made this basic insert for the OLIGHT Arkfield Ultra to fit in my office drawer. It's a 1x4 grid and little wiggle room.
- Downloads
- 46
- Likes
- 1
- Rating
- 0
Search results: olight
Counting matching models…
P
Printables
Olight 6 Bay charge stand.
6 Bay Charge Stand for Blue USB chargers for Olight Flashlights. Recommend 18 10x3 mm Magnets . When inserting magnets ensure polarity is attracting base of flashlight. Base polarity should be same as inserted magnets.
P
Printables
ProLight 1000 Inteletec CNC Dust Boot - UPDATED 7-25
This is a dust boot for the ProLight 1000 CNC, it bolts over the front and holds a mist coolant nozzle as well as a light ring. The main flat piece is meant to be steel, it can be plasma cut before being counter bored or countersunk…
P
Printables
Screwless Handlebar Mount for Olight Baton
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
P
Printables
Flashlight Diffuser (for OLIGHT i3T EOS & Standard AAA Flashlights) - Pine Makers
This flashlight diffuser transforms your flashlight into a versatile colored light source. Simply insert a small plastic sheet of your desired color into the diffuser, and your flashlight beam will be filtered to match. This download…
P
Printables
Olight Seeker 4 pro holster mount Honey comb Wall
Storage/Display solution for the Olight Seeker 4 Pro using the holster for a Honey comb storage Wall
P
Printables
Olight Seeker 4 pro holster wall mount
Wall mount bracket for the Olight Seeker 4 Pro holster
P
Printables
Olight O-clip Keyring Clip
Remix of the keyring holder for the O-Clip Pro for use with teh O-Clip. This is a mounting clip that attaches to a keyring, and that perfectly mates with the Oclip strong rear spring clip. It clips in and out as easily as just grabbing…
P
Printables
Gridfinity OLIGHT Arkfeld Ultra insert
I made this basic insert for the OLIGHT Arkfield Ultra to fit in my office drawer. It's a 1x4 grid and little wiggle room.
P
Printables
SOLIGHT LED table lamp_replacement controller body
The bottom and top of the controller need to be glued together, the battery cover is attached with a small screw (M2). A piece of foam or foam double-sided tape must be glued to the inside of the cover to prevent the battery from moving.
P
Printables
Olight S1R Baton II keychain attachment (should work on Baton 3)
A cap for the end of an Olight S1R BATON II with a loop for attaching to a keychain. There are slots for four 5mm neodymium magnets.A cap for the end of an Olight S1R BATON II with a loop for attaching to a keychain. (should be able to…
P
Printables
Microlight airplane
A version of a microlight plane i really like and often fly in. I wanted a little model of it, so i made one! Have fun printing!
P
Printables
Mini rack 1U holder for Solight PO80B
10'' mini rack holder for Solight PO80B ( https://prepetove-ochrany.heureka.cz/solight-po80b/#prehled/ ) for 10'' mini rack
P
Printables
OLIGHT BATON 3 PRO PICATINNY MOUNT
BEST DESIGN FOR OLIGHT BATON 3 PRO Snap in and out using Olights orginal clip groove. Simply remove clip from your Olight and install into mount. Printed using PETG for durability. (2) M4x25mm Socket Head Screws (2) M4 Nuts Compatible…
P
Printables
Case for Olight Marauder 2
This case for the Olight Marauder 2 flashlight, allowing you to wear your Marauder on your belt. The case is designed so that all controls remain accessible. Partslist: 4x - M4x12mm Countersunk 4x - rubber spacer (normally included in the…
P
Printables
Double Olight Stand
Slightly loose fitting, Add hotglu as needed Also need m3 inserts from cnc kitchen I used these Rubber feet & M3 Screws . . . If I saved you time and effort and you feel inclined to throw me a couple bucks for the I spent modeling and…
P
Printables
Olight ArkPro Lite wall mount
I wanted a wall mount that I could stick to a wall in my motorhome to hold a torch (ArkPro Lite). The holder had to hold the torch securely while driving but release the torch easily when I needed it. I designed this to hold the torch…
P
Printables
Olight I3T EOS clip
Clip for the Olight I3T EOS flashlight. The original was made of metal; here is a replacement you can print yourself. Designed in two parts for durability. Both parts should be printed in landscape orientation, as shown in the attached…
P
Printables
Olight I3T EOS diffuser
Diffuser for the Olight I3T EOS flashlight. Durable, diffuses light well. Allows you to mount the flashlight on the diffuser or in the reverse position (using a separate design: Olight I3T EOS stand ). Requires transparent filament (PETG…
P
Printables
Olight I3T EOS stand
Olight I3T EOS Flashlight stand. It allows you to position the flashlight vertically so it shines upward. You can also use another one of my designs, the Olight I3T EOS diffuser , to position the flashlight upside down :) Small, handy,…
P
Printables
Olight S2 Baton diffuser
Diffuser for the Olight S2 Baton flashlight. Durable, diffuses light well. Allows you to mount the flashlight on the diffuser or in the reverse position. Requires transparent filament (PETG or PLA). When using regular filament with a low…
P
Printables
Diffuserhalter für INVOLIGHT IP PAR 1818 V.2
Hallo! Werksseitig kann man die LED-Lampe von INVOLIGHT IP PAR 1818 V.2 nicht mit einem Diffuser versehen. Ich bin aber auf die Suche gegangen und habe festgestellt, daß der Diffuser von einer anderen Lampe INFINITY RACCOON P 14/4 genau…
P
Printables
Olight Baton Picatinny Mount
Additionally needed: 1x M3x26 screw, 1x M3 nut, 2x cable tie Feed the cable ties through the holes (as shown) and fasten them around the Olight. In the files section, you can also find models for 25,4mm (1") and 30mm flashlights.
P
Printables
Olight MCC Magnetic Universal USB Charging Cable Hanger
I use to balance the light on my charger and was frustrated when it would fall off by being bumped. Insert your MCC magnetic charge dock into this print and hang your Olight from the USB charger. When you print this, make sure to print…
P
Printables
Olight Arkfeld to Dyson V8 mount
Mount an Olight Arkfeld flashlight to a Dyson V8 vacuum cleaner.
P
Printables
T-Slot Olight i3 Holder
This flashlight holder is simply pushed into the rail, it can also be used later without dismantling the rails. Usage is easy, insert and twist.
P
Printables
Olight Oclip Sleeve
I created this model on Tinkercad. I needed a way to prevent the light from turning on when in my pocket. I printed with TPU, and it solved my problem of the light turning on in my pocket.
P
Printables
Olight Marauder Protectors
End and Bezel protectors for a X7 Marauder flashlight. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: Ninjatek Cheetah TPU Black Category: Hand Tools
P
Printables
Olight Perun 2 mini holster
I need my flashlight near me, I also need some spare ibuprofenium for my nostrils. So i designed this little fella. It is designed to fit Perun 2 mini flashlight, it is not easy print but printer like Prusa/Bambu/Creality K1 should not…
P
Printables
Olight Skadis sorting lineup
OLIGHT Skadis A holder for the oligh flashlights which are magnetic. The lamps can be stored standing or hanging. The washer 23.6 x 2.2 is simply inserted into the hole provided during the printing break. Description of how it is printed…
P
Printables
Microlight Top Plate - Chube
This remixes the top plate so a Chube from Luke's Laboratory can be used. Haven't printed yet, so any feedback is welcomed.
P
Printables
Olight and Fossil Watch Stand
This is a design to charge both my EDC flashlight (an SRII Baton from Olight) and my watch (a Fossil Gen4). I printed it in PLA on a Prusa i3 Mk3, with four walls. In order to build this, you will need to first install the charging puck…
P
Printables
Olight S2 baton replacement button
Kids managed to dig out the power button so I modeled a new one. Print with very flexible filament, what I used was rubberjet TPE88
P
Printables
Olight Charging Bracket
I wanted a simple charging bracket for a little olight flashlight I use at work. This is what I came up with. This only works with the blue metal style olight magnetic chargers. It doesn't work with the larger plastic ones. I do plan on…
P
Printables
Olight i3T2 EOS honeycomb storage wall
Remixed for the Olight i3T2 EOS and made it longer. Can be stored lens down or lens up.
P
Printables
Olight Arkfeld /ArkPro honeycomb storage wall
Olight Arkfeld holder for honeycomb storage wall edit 11-19-25: added model for ArkPro - needed slightly more clearance
P
Printables
Caps Olight Warrior Mini 2
A simple hood for the Olight Warrior Mini 2 to prevent it from accidentally turning on in a bag !
P
Printables
Olight Baton 3 Button TPU
Button Replacement for a Olight Baton 3. I printed it in TPU 95A, but you may want to use a softer material. Model is designed to print without supports with a 0.2 initial layer and 0.1 layer lines. Outer rim has a slight tamper to allow…
P
Printables
OLight I3T 2 EOS AAA Flashlight Holder, 4 Magnet Version
I changed the model to fit my needs of a place to store my $20 (late '24) OLight I3T 2 EOS with magnets on the magnetic spot on my Hyundai Kona (see pic). The flashlight works great in the holder, so just pick it up and use it as I…
P
Printables
Olight 6 Bay charge stand.
6 Bay Charge Stand for Blue USB chargers for Olight Flashlights. Recommend 18 10x3 mm Magnets . When inserting magnets ensure polarity is attracting base of flashlight. Base polarity should be same as inserted magnets.
P
Printables
OLight I5T EOS AA Flashlight Holder, 5 Magnet Version
I changed the model to fit my needs of a place to store my Olight I5T EOS with magnets on the magnetic spot on my Hyundai Kona (see pic). The flashlight works great in the holder, so just pick it up and use it as I removed material around…
P
Printables
olight oclip tripod mount
this is a mount for the olight o'clip meaning it can stand on a tripod. one m3*8 scew required
P
Printables
Olight mini 2 holder for 3M Safety Glasses
This is a magnetic holder for Olight's mini 2 magnetic flashlight. It slides on to the temple arm of the 3M Virtua safety glasses. Once the model is printed, press a 10mmx3mm magnet into the back of the holder, making sure to match the…
P
Printables
Gridfinity Olight Charger (22.5mm Version)
This base fits the newer, slightly larger Olight chargers. The newer chargers are 22.5 mm in diameter.
P
Printables
Olight Baton Diffuser
This is a light diffuser designed to be attached to the Olight 2, 3, 4, and possibly other models. It is 3D printed using PETG. To achieve smoother surfaces, a relatively large amount of tree support structures were used during the…
P
Printables
OLIGHT Sphere Hex Lamp Charging Base
Hi! I'm HEX, a nifty lampshade and charging base for your OLIGHT Sphere! The charger is a TIGHT fit - but you dirty dogs like that. .15LH / SLOW Accel speeds / 3 Walls / POLYTERRA PLA 220 fil / 65 bed. Supports are fun to remove, to be…
P
Printables
Commercial OLIGHT Sphere Hex Lampshade Charging Base
This listing is for HEX, the OLIGHT Sphere charging base (charger not included) - this is for COMMERCIAL use only.
P
Printables
OLIGHT Charger Stand (Roll-Off)
I made this model after getting frustrated with others available, or others being pulled from availability. .15 Layer Height; otherwise the top inside lip will string out. This fits the NEW BLACK charger Blue USB chargers. TIGHT FIT on…
P
Printables
Honeycomb Flashlight holder Olight R50 HSW 43mm
This is a little holder for a Olight R50 Flashlight. It should also work for the Pro variant, but measure first. The holder has a 43mm x 28mm Hole, if you want to use it for anything else. It has a print in place insert attached and can…
P
Printables
Microlight print head for Rat Rig V-Core 3/3.1 printers
Microlight 3.2 Very light and rigid print head for a V-Core 3 printer. The top plate and front plate are now printed as a single item. There are several other small detail changes. The integrated top/front plate offers several advantages…
P
Printables
Gridfinity 1x1 Olight M2R Pro Charging Dock
Gridfinity 1x1 Olight M2R Pro Charging Dock A specialized charging dock for the Olight M2R Pro flashlight, featuring an integrated battery disconnect slider. This Gridfinity-compatible design provides secure charging while protecting…
P
Printables
Gridfinity Olight S1R Baton II/III holder
This is a 1x1 holder for an Olight S1R Baton II and III. There's a good chance it also fits the Baton I, but I don't have one of those to test. I included the step file for easier remixing. There are magnet holes in the bottom for…
P
Printables
Olight Odin S Inlay for Rugged Box
Based on the rugged box (used dimensions are in the attached .csv file), I designed 3 inlays to fit all my accessories for the Olight Odin S Also fits the M-LOK Wire mounts . Printed the inlays with extrudr Medium TPU. Box fits: Odin S…
P
Printables
flexi dog lead / leash torch fitting for olight ir2
This adds a torch (olight ir2) to a flexi dog lead, i cut it in half in the slicer to save pain then glued it together. Added some glue tabs to make assembly easier. (see v2)
P
Printables
Olight Odin S front and back cover
Designed front and back covers for the Odin Olight S light. The back snaps on and holds in place firmly. Filament used: add:north TPU Pro Matte 85A
P
Printables
Olight Odin S holster with lock mechanism
Printed the inlay with add:north 85A Pro matte TPU, the rest with extrudr XPETG. The holster fits my 45mm range belt. Feel free to change the width for your needs. For the assembly you need: 2pcs 3x15mm springs 4 pcs DIN 7982 Srews…
P
Printables
BIKE LIGHT olight support
This model has been designed to be printed with resistant materials such as PP, ASA, ABS, TPU, PETG, ... The 'non-slip' piece is preferably printed in TPU, it is designed to prevent the support from slipping on the handlebars. Greetings…
P
Printables
Light diffuser cone for Olight RN 1500
Cone to diffuse the light coming from an Olight RN1500. It is best to print the cone with a color that can filter the light without blocking it. To use the cone, fit it with the top of the torch.
P
Printables
OctoLight Relay enclosure
Enclosure for OctoLight. This contains just the relay module and not the Raspberry itself. Only needs very small support Uses only M3 hardware to bolt together. PCB is hardmounted by melting and pressing the tabs. Non-intrusive way of…
P
Printables
ProLight 1000 Inteletec CNC Dust Boot - UPDATED 7-25
This is a dust boot for the ProLight 1000 CNC, it bolts over the front and holds a mist coolant nozzle as well as a light ring. The main flat piece is meant to be steel, it can be plasma cut before being counter bored or countersunk…
P
Printables
Angled clip mount for Olight/Magicshine rear bike lights
Needed a bag mount for an Olight rear bike light. Tested with a Topeak Aero Wedge. Olight uses a proprietary quarter turn mount design that seems to be shared with Magicshine lights so it should also work for those (not tested). Recommend…
P
Printables
Olight Charger Stand
The model contains slots in each "arm" for suction cups that will stick to a surface allowing for one handed removal. Even without suction cups this is an improvement over the charger alone because you can hold down one of the arms and…
P
Printables
Replacement Housing VideoLight controller unit, Ersatzgehäuse Videolicht Bedienteil
Diese kleinen, preiswerten Video-/Fotoleuchten leisten eigentlich recht gute Dienste als Zusatz- oder Hintergrundlicht. Allerdings sind die Folientaster am Bedienteil recht schnell verschlissen. Aber wozu hat man schließlich einen…
P
Printables
Olight Arkfeld Pro lens cap
This is a thin lens cap for the Arkfeld Pro. It will not fit the Ultra model; see my profile for the Ultra. However, it is as thin as I could make it without it being brittle.
P
Printables
Olight Arkfeld Ultra lens cap
This is a thin lens cap for the Arkfeld Ultra. It will not fit the Pro model; see my profile for the Pro. However, it is as thin as I could make it without it being brittle.
P
Printables
Olight Perun 2 mini holder for Leatherman nylon sheath
The set of tools, Leatherman and Olight Perun 2 mini is an ideal combination. Compact, versatile and high quality. Therefor it needed to be paired up. I found the holder by Meuriz for the Baton and loved the design. But it did not fit the…
P
Printables
olight perun 2 mini battery enlargement / extension
Olight perun 2 mini battery extension / I used the SAMSUNG 5000 mAh INR 21700-50E battery and a case from Ali link - https://a.aliexpress.com/_EIWUrfe PLA+ Creality K1 max 0.6 nozzole support
P
Printables
Olight Obulb Plus Hex-Lampshade
Hex-Lampshade for Olight Obulb Plus with an optional top cover. Print it with a 0.4 nozzle in transparent filament. When the bottom holder for the charger is not needed use the original model. See https://www.printables.com/make/2497558
P
Printables
Olight Oclip Pro Mini Lense Cover
Best to print in some somewhat flexible material like PETG or TPU. Protects the lense from scratches during carrying :)
P
Printables
Olight i3E EOS Lens Cover
A small cover for flashlight lens. Cover from dust and scratches. Additionally, it may work as light diffuser. With multitool case, it provides additional protection from falling out. Print with supports from the bottom, using PETG or…
P
Printables
Olight Prowess Protective Cap / Schutzkappe
I wanted some protection for my Olight Prowess - and I wanted it to match the design of the flashlight. The logo was lasered in later on, it is not a part of the stl. It should friction fit the light, I printed it in simple PLA, no…
P
Printables
Olight Warrior Ultra Honeycomb wall
Olight Warrior Ultra holder for honeycomb storage wall
P
Printables
Olight Baton4 Premium Honey comb Wall
Storage/Display solution for the Olight Baton4 Premium for a Honey comb storage Wall
P
Printables
UPDATED: OLIGHT Belt Holster
This is a flashlight holder to go onto most normal belts. it is designed to accommodate OLIGHT Warrior 3S type flashlights with metal clips attached.* There is a feature that works with this type of flashlight - put the light into the…
P
Printables
OLIGHT Arkfeld Pro 1300 Flashlight Cover
This is an OLIGHT Arkfeld Pro 1300 Flashlight cap/cover. It is designed to click fit onto the front. When not in use, it can also click fit to the tail end (magnetic end). There are two iterations: without loop with loop (for attaching…
P
Printables
Olight i3t/i3e/i18 flashlight holder for IKEA Skadis pegboard
Olight i3t/i3e/i18 flashlight holder for IKEA Skadis pegboard Print with supports
P
Printables
Thread Boards OLight mount
Simple OLight mount designed for use on the Threadboards system by 3D Printer Academy. Printed in Elegoo PLA-CF Printed on Elegoo Centauri Carbon Wall Loops - 6 Top Shell Layers - 6 Bottom Shell Layers - 5 Infill - 20% 3D Honeycomd…
P
Printables
Flashlight Diffuser for OLight Seeker 4 Pro
Using the design principal “KISS”, I created a couple light diffusers for my Seeker 4 Pro flashlight so I can use it as a small table lamp or hanging light. First of all, I made these with PETG because of the heat the flashlight can…
P
Printables
Flashlight Diffuser for OLight Baton 3 Pro
Using the design principal “KISS” (Keep It Simple Stupid), I created a light diffuser. This one is for the Olight Baton 3 Pro flashlight. I wanted to use it as a small table lamp or hanging light. I made it with PETG because of the heat…
P
Printables
Olight Perun 3 Honeycomb wall
Olight Perun 3 with headband mount for honeycomb storage wall organizer
P
Printables
Olight Odin S/Warrior 3S lens cap
Lens cap for Odin S and Warrior 3S lights. Two models provided, one for rigid cap and one for a cap printed for flex or TPU stretchy material so it's slightly tighter inside dimension. I used a 1" ranger band with an elastic hair tie to…
P
Printables
Olight dual magnetic charger base holder
Base to hold 2 magnetic chargers, aligns the light in the front of the base so you can see the status light on the charger.
P
Printables
Olight pressure pad mlok mount
Olight pressure pad mlok mount for Odin S pressure pad. Separate head and tail caps to mount your pressure pad to an mlok platform. Recommend printing PETG with 50% infill to get full strength of the caps. Last photo includes my Olight…
P
Printables
Olight Odin S pressure pad mlok mount
Olight Odin S pressure pad mlok mount. A variation that is full-size and encases the pressure pad and wire routing.
P
Printables
Olight Odin S pressure pad mlok mount
Olight Odlin S pressure pad mlok mount. This mount is full-sized and has the wire routing on the top, a bit longer method.
P
Printables
Olight magnetic charger base holder
Base to hold one magnetic charger puck, aligns the light in the front of the base so you can see the status light on the charger.