Counting matching models…
Helpful markers for tracking the dizzying number of suspects and clues. Update: Now with hexagon markers!
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
My wife decided to try and use Diatomaceous Earth to rid our house of some tiny silver fish. The powder is cheap enough on the big A, but the applicator was like $10 USD. Firing up FreeCAD 0.20 was able to design a two part applicator the…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
Nozzle: 0.4 standard nozzle Supports: from the buildplate only Filament: PLA
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
0.20-0.12mm with supports
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
This is artillery and a fleet to replace the cardboard pieces in Diplomacy. The top of the zeppelin file is the bottom of the zeppelin piece. I made this in Blender and Sketchup. Artillery Print Instructions: No supports or rafts at…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Little stand to provide a more solid base when tamping with a Isomac Giada portafilter
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
This organizer can hold the full content of the Beasts and Diplomacy board game box including The Almanac solo expansion. All the cards can be sleeved (I measured everything to accommodate Paladin sleeves) and everything would fit. No…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
Recreation of the well-known Fifteen52 Turbomac to work with Lego Technic parts. This model has been splitted in two halves for better printing and minimum usage of supports. The holes on the hub uses this part: BrickLink - Part 32002 :…
Turbomac wheel for 1:10 rc cars (Onroad/Drift). 12mm Hex. 5mm offset 6mm offset 7mm offset 8mm offset 8,5mm offset When you print the wheel in your desired offset, you will need to print the vent with the same offset rating to make it…
Anatomicky přesný model lidského žaludku. Vhodný k výuce
This is an insert to combine all of the current content for Chip Theory Games' fantastic tactical skirmish game, Hoplomachus. The components fit into the 2 core boxes and accommodate all the Pandora expansions (Ruin, Wake, and Might),…
an arrow and magnifying glass for micromacro. magnifier print at 25%
This is a scale to use when taking a photograph of something to be imported as a canvas into Fusion 360 and then calibrated to use as a drawing reference. I changed the filament color after the 2mm layer height. For the scale I used Ikea…
Reinforced replacement electrical outlet cover
Edit: I've created a newer version to also store the Pandora's expansions within these same boxes - please see that listing here https://www.printables.com/model/1212819-hoplomachus-all-in-insert This is an insert designed to assist with…
A flag I have designed for the Diplomacy board game, to replace the cardboard ones that come with the game. I also printed on paper the flags of each nation, front and back, to glue them on the pieces. I include a pdf with the flags ready…
While printing easy 13 I noticed that the ball joints were being kept from going in to their socket. After a quick investigation I found the cause. The "body” part that the joint itself slides into was blocking the socket from going all…
3D printed Armies(tanks) and Fleets(ships) for the board game Diplomacy. SUPP is written on the sides so during order resolution, you can tip over units on their sides to visually represent which units have support orders. Once printed I…
These adaptors let you use miniatures from Star Trek Attack Wing, Star Trek Frontiers, Star Trek Tactics, and Star Trek Fleet Captains with Star Trek Into the Unknown. Don't let all the work the Star Trek Into the Unknown team did to…
English (This translation is computer generated) : Ostomachion is considered to be one of the oldest jigsaw puzzles in the world. It is very similar to the Chinese tangram game. It is attributed to the mathematician and philosopher…
A device to carry the lighter and a compartment to carry an individual cigarette, with a snap-on lid. It is suitable for Shark or Candela brand lighters. Pay attention to the horizontal expansion depending on the printer, so that it…
A device to carry the lighter and a compartment to carry an individual cigarette, with a snap-on lid. It is suitable for Shark or Candela brand lighters. Pay attention to the horizontal expansion depending on the printer, so that it…
Disclaimer: This project is not actively maintained and was created for personal use, hence no official support of any kind is provided! Goals: Control audio on a application or device basis ( Deej ) Easily create keymaps ( QMK ) Have an…
Un modelo simple para uno, desvare de manos y patas curiosas en mi caso
A quick tool to help with alignment of plate mount switches on plateless builds like the Romac Macropad. Fit the switches to the pcb with the tool laid on top, use a piece of card or similar to help you flip it over, solder switches,…
A very simple print to rise the premium alloy dice slightly so it's easier to get them out of the box. The V is for Hoplomachus: Victorum. I printed the risers face down with 0.2mm layer height.
English (This translation is computer generated) : This Ostomachion case provides an elegant and practical solution for folding and carrying the Ostomachion. You will find this type of Ostomachion among my models. Ostomachion:…
Inspired by the Hoplomachus: Mag Tokens currently for sale in the Pandora's Box campaign seen here: https://gamefound.com/en/projects/chip-theory-games/hoplomachus-pandora-expansions--base-game-reprints#/product/44517 --- I don't charge…
This is a small basket designed to perfectly fit the feet of the Isomac Macinino Professional. Holds securely without slack and catches all coffee grinds not caught by your portafilter.
This is a simple drop-in case for the Romac+ macropad. It should with a tiny bit of wiggle room but fairly snug, unless you have overextrusion problems. Mine just barely brushes against the walls as it's dropped into the case. The print…
We used these arrows for playing the board game "MicroMacro", which is an awesome detective game where you follow clues on a large line-art map. Marking clues is very useful when playing with multiple players. After using small D6 dice…
Boite (+ Couvercle glissière) pour remplacer la grande boite de micromacro. Fait la taille de la map plié Avec espace pour coller nom/image jeu.
PROTECTOR TOMACORRIENTE preferencia imprimir en petg
Made to be a drop in replacement and to be used with the original metal plate. After printing, use some clear epoxy or clear spray paint to seal of the inner surfaces to prevent coffee and water from seeping into the infill. Printed at…
Bring the majestic power of ancient Greece into your space with this stunning 3D printable statue that captures every intricate detail of classical artistry. This elegantly draped figure showcases flowing robes and timeless proportions,…
Description This is a case to separate the mag tokens from each other, as they tended to clump and mix together. This makes finding and managing the awesome mag tokens much easier. This also fits inside the hoplomachus victorum main box…
As I mentioned this is a drip grid, Illy forgot to put it in its cheap and horrible ESE Pad Espressomachine. Anyway, the print works fine and fits snug in the pad container of the machine to allow the pads to dry. Don't use PLA because…
A device to carry the lighter and a compartment to carry an individual cigarette, with a snap-on lid. It is suitable for Shark or Candela brand lighters. Pay attention to the horizontal expansion depending on the printer, so that it…
Simple remix of the save tray lid. The tolerance was to tight and the jigsaw arms broke on one side, as the arms are sliced separate from the main lid at least slicing for 0.6 nozzle. I just refitted the jigsaw arms to work with my 0.6…
Soporte para un Oral B y su cargador, que se puede enchufar directamente a una toma de corriente
Description This is the all you needdisplay for playing hoplomachus victorum. It has all the chips you need during gameplay, minus health chips. You can see my suggested order of chips in one of the images. This display fits all the…
Just a little change on the right stadium from “Hextra”, to accomodate heoes prowess and general prowess. I will remove my file if Hextra can add it to his wonderful pack. https://www.printables.com/model/1212819-hoplomachus-all-in-insert
Rack for 5 ml tubes. Fitting dimensions for MACS multiStand.
Have you ever lost a board game piece? I did here is a model which you can print and play with it in Diplomacy.
Description So this is just a simple stand to hold your camps units. You can print the stand that is fixed together and houses 9 units, which has been enough for me during my campaings. And I have also included the stl files for the…
EN: it is a simple replacement piece for the ROFT Bumblebee legends class figure's stomach piece, in my case the leg balljoints were broken and that will probably the most common breakage point. The piece might serve for any remolds of…
This insert is designed for the stuff I own, so you it may not match with yours, you might need some filler items in that case. It's designed for: Hoplomachus Remastered Pandora's Wake Hoplomachus Alloy Dice Set 2x Hoplomachus Premium…
This is a a set of the Ostomachion puzzle, a design attributed to the Greek inventor, scientist, and polymath Archimedes. The goal is to challenge yourself arrange the 14 pieces into a variety of designs. The most basic is a simple…
I wanted a bracket to reinforce the orange cover on the Miltenyi AutoMACs I was using in the lab almost daily. It is easily broken if operators didn't lift the cover before pulling it out to load the conical tubes. Used a 0.4mm nozzle and…
I'm making a fraggle rock puppet and decided 3d printing the stomach with TPU would be easier than carving foam :)
Boxes for the solved and unsolved cases for the MicroMacro series of games. Created with the help of Bento3d. This can be printed in PLA, but I think over time the hinge joints will become weak. I printed mine using PETG.
Quick DE scoop to put Diatomaceous Earth into your pool filter. Scoop is sized equivalent to a 1-lb coffee can. There are graduations in the scoop to get an accurate measurement.
These are holders for the new MagTokens for the board game Hoplomachus Victorum. Print 1 Box and 3 Top/Base. They are meant to be used with adhesive ferromagnetic sheets of about 0.6mm thickness. These need to be cut to about 130x16mm and…
Stencil measures 88.00 mm x 110.00 mm, 1mm thick. Uses standoffs to connected isolated islands. Meant for painting patches.
I designed this to give a rough idea of scale for photographed items. If you want to reverse engineer a photo, you'll want something with more precision. This is for getting a scale idea for larger objects. Designed with a color change…
Are you always forgotting something in Hoplomachus Victorum? Oh no this guy has Hamstring and I let it attack me... Oops, i was Stunned...and i killed the Primus... Please find a set of markers for All status and tactics from Base Game…
3D printable topographic miniature of Comacchio - 🇮🇹 Italy Capture the beauty of Comacchio 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 44.694, 12.185 (LatLng)…
This insert is designed for the stuff I own, so you it may not match with yours, you might need some filler items in that case. It's designed for: Hoplomachus Remastered Pandora's Wake Hoplomachus Alloy Dice Set 2x Hoplomachus Premium…
3D printable topographic miniature of Comacchio - 🇮🇹 Italy Capture the beauty of Comacchio 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 44.693, 12.183 (LatLng)…
Just a little change on the right stadium from “Hextra”, to accomodate heoes prowess and general prowess. I will remove my file if Hextra can add it to his wonderful pack. https://www.printables.com/model/1212819-hoplomachus-all-in-insert
Stencil measures 88.00 mm x 110.00 mm, 1mm thick. Uses standoffs to connected isolated islands. Meant for painting patches.
English (This translation is computer generated) : This Ostomachion case provides an elegant and practical solution for folding and carrying the Ostomachion. You will find this type of Ostomachion among my models. Ostomachion:…
The central stomach piece of hte armor based on Brigitte from Overwatch I madethe piece can be printed easily and has a cavity for LED lights and a thin surface to be illuminated from behind so it glows like the one seen in the game
A 3d-printable model of the new batman stomach armor made by commissionthis includes a flat version for casting to flexible material and a curved versionboth can be scaled and stretched and remain well printable
3D printable topographic miniature of Comacchio - 🇮🇹 Italy Capture the beauty of Comacchio 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 44.694, 12.185 (LatLng)…
3D printable topographic miniature of Comacchio - 🇮🇹 Italy Capture the beauty of Comacchio 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 44.693, 12.183 (LatLng)…
![[legacy] Hoplomachus Integrated: Victorum and Remastered](https://media.printables.com/media/prints/528703/images/4279436_840d92b5-1f8e-45b6-8517-7e1775935049/box-layer-1.jpg)
![[WIP] AudioMacro18 - Macropad with 18 macro keys and 5 encoders](https://media.printables.com/media/prints/193221/images/1794448_6c3ca143-8e0f-421f-8181-20411bf3ded6/img_2274_cropped.jpg)
