Counting matching models…
Oval planter pot with two drainage holes and feet at the bottom. Inspired by planters from Calibonzai on Etsy like Oval Moss Green Glazed Shohin Bonsai , Oval Mame Shohin Bonsai , Oval Bonsai Cactus & Succulent Pot . Supports are…
Print approx. €8.93–€10.91 excl. taxPreliminary estimate for one variant
El modelo se imprime activando la opción balsa y con una estructura de soporte para mantener la conicidad de la base, hay que seleccionar la opción de detalle para que salga a buena resolución.
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
wall art silhouette model of the 1963 corvair monza. Adjustable size. I accept model suggestions or ideas of new models
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
Let me introduce a perfect decoration for every Formula 1 fan . One of the quickest tracks in F1 calendar - Autodromo Natzionale Monza 🇮🇹 - just asks for some place on the shelf or desk. Model is divided into two parts. Thanks to it you…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
**Updated 9/23/2022: pants.stl reloaded with the flat side down** Speedy Gonzales, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is portrayed as "The Fastest Mouse in all…
This is a faithful reproduction of the Autodromo Nazionale di Monza. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
This model is a modified version of the model on SketchFab by TheKnightDuck. My goal was to experiment with overhangs and try to minimize supports by changing angles in the model. I used Blender with proportional editing and sculpting. I…
Autodromo Nazionale di Monza Circuit, Monza, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Speedy Gonzales 2023-08-13: Added a version without the Desk Stand Tab. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest…
Have a good time printing it... Cheers! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: NA Filament: NA NA Category: Automotive
Speedy Gonzales Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
Introducing the "Chevrolet Monza Classic 500 Car Shell" – a 3D printable replica for 1/28 scale RC cars. It captures the classic Chevrolet Monza Classic 500, offers customization, fits both FDM and resin 3D printers, and ensures a secure…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Italy Monza You can build a racing circuit in Monza using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 1× A2LRC - 2× A3CLRC - 6× A3LRC - 10× B0ICRC - 10× B0SICRC - 1×…
LEGO Mercedes W196 Monza 1955
Fan de F1 j'ai voulu me faire un petit totem du circuit de Monza où je suis allé l'an dernier. Si le modèle plait je me lancerais dans les autres circuits de Formule 1. Imprimé en 2 couleurs en PLA sur ma Ender 3 V2 NEO en environ 2h30.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm)…
This is a replica of the F1 circuit of Monza (Autodromo Nazionale Monza). You can download the frame to hold the model here . In case you want to make more circuit miniatures, you can find a grid for the frames to hang on the wall right…
Bonzai Bill from Super Mario Oddessy
3D model of the Monza race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
After trying out the gear published on thingiverse in the actual odometer, I've discovered that the little indentation that hooks to the number pin was not deep enough. The original has a deeper indentation compared to this model. So I…
Formula 1 Circuit Autodromo Nazionale Monza Italy with elevation and DRS detection zones. Can be printed as it is with 0.4mm nozzle or scaled to 120%.
Pequeña peonza de la película Inception (Origen). No necesita soportes, solo pegar el tetón con pegamento y listo.
I just wanted to make this for my shelf and thought I would share it. Inspired by https://www.printables.com/model/43781-f1-bahrain-track
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
Autodromo Nazionale Monza LED Lamp. Print base with 60% or more infill for the top part 80% or more is preferred to work as a diffuser if needed. Top can be printed with white filament I recommend doing it with clear filament to let light…
A simple keychain model. In Slicer, you can set a double color in layers.
This is a coaster I designed to be printed in multiple colors. If you have a MMU or similar, it should load and print as is. I have also included a single color version for anyone who wants to just print it that way. If you don't have a…
La clasica peonza con cuerda, el modelo esta preparado para añadirle cualquier nozzle para que sea mas resistente(hay que roscarlo) pero tambien puedes imprimir la punta de plastico.
Layer 0.1 Infill 60% no supports no tolerance adjust
This spinning top is designed in two parts that fit together perfectly, ensuring they do not come apart during use. Its design allows it to spin smoothly, providing a fun and seamless experience. Ease of Printing : It does not require…
Circuit de Monza formula 1 2025
Neon wall decoration for all fans of formula 1, especially the fastest tracks in the championship - the queen of speed. 😊 I had the opportunity to be in Monza this year, so I wanted to make an authentic decoration. This is the first…
MMU neded. Color: ⚫ circuit ⚪ numbers and "Autodromo di Monza" 🔴 sector 1 🔵 sector 2 🟡 sector 3 Put some glue before inserting the track in the holes of the base. 2 different version, one taller than the other. You can chose the best one…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu White PLA+ Sunlu Red This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm)…
Pojďte dál a Teď nerušit MODEL OD ONZA: https://www.printables.com/model/1044490-posouvaci-text
Monzaemon Digimon Creature Model
Meshes designed by Amario57 http://www.thingiverse.com/Amario57/about Print Settings Printer: BFB IeC refurbished Resolution: 0.2 mm layer Notes: Printed with 4 ways Flux capacitor Category: Signs & Logos
Just print it without supports.
This is a small statue of the Autodromo Nazionale di Monza that is part of the F1 calendar. It is made up of two parts, one for the base and one for the track. You can print it in two separate colors if you would like Printing…
Decorative LED lanterns and resting samurai for Lego bonzai Lego # 10281
Peonza de juguete. Fácil de imprimir y sencilla de montar. Ajustes de impresión: Boquilla de 0,4 mm Altura de capa de 0,12 mm 5 perímetros 25% de relleno. Se requiere soportes PLA Montaje: Las tres piezas se encajan a presión sin…
Ferrari Monza SP2 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Pallina di Natale con il circuito di Monza, Italia
Shallow planter for Bonzai tree with zen garden. Integrated loops to tie down the roots if needed. Diameter: 210mm Solid model (top planters are no loose)
The drip tray perfectly matches the shape of the 'Emsa PONZA' pump carafe. Printing information The STL file is correctly aligned. Layer height: 0.2mm Infill: 10% Support: none I am looking forward to your Makes! :-) If you like this…
Hola! Ya vi un modelo muy similar que no tenia perfil y me fue un quebradero de cabeza adaptarlo. Al final, sin exito, lo descarté y quise practicar en hacer algo similar desde cero. Este es el primer logotipo que hago similar, me he…
🐭⚡ WallArt – Speedy Gonzales Bring some speed, humor and classic cartoon style to your wall with this Speedy Gonzales WallArt! The recognizable silhouette and playful design make this piece a fun decoration for cartoon fans,…
This is a gingerbread cutout for the Monza F1 track. It is a bit simplified to work better but it still looks like monza. Printing instructions I would recommend printing it with the Monza text on the printbed. Other than that it doesn't…
HSW mount for the 1000v cimco telephone pliers
For the most detail, the thinner the layer height the better. I print the base layers at 0.1 mm and the elevation at 0.05 mm. Monza does not have a lot of elevation change throught the track even with 3:1 elevation exageration.
For every Maya and every Mimi, you're gonna need to make two Rudys. L'ombre des oiseaux carressait sa peau, elle bronzait au lait de coco.
dual color bonzai bill, I used filament change command at certain layer height to get the color effect
Gonzalo Fernández de Córdoba y Aguilar – Buste 🇫🇷 Français Découvrez ce buste de Gonzalo Fernández de Córdoba y Aguilar , plus connu sous le surnom de « El Gran Capitán » , l'un des plus célèbres chefs militaires de la Renaissance…
A modified ps5 controller stand with the logo of the greek rock band "BONZAI"
Multicolored AC Monza logo, made for my kid who collects logo's. After he finished his “Eredivisie logo collection” he wanted a “Serie A logo collection” so here is one of the logo's. Print Instructions Print in 0.2mm layers, and change…
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
Designed to perfectly frame a pair of bonzair/herb scissors with a cute leaf vein pattern.
https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Ftse1.mm.bing.net%2Fth%3Fid%3DOIP.-7IGwqly2sHws8oYyyteVgHaHa%26pid%3DApi&f=1&ipt=382b8ef9296ec1d0f16006283fae4a4cecad9a95ffa3322779e227e85f2a59af&ipo=images You need some normal…
So this is a wall art I found, OG creator is linked. I did NOT make this, I just customized it.
This is a fantastic model of the Monza racetrack that I love to keep close to me while I play F1. This is part of a long collection I'm about to release, which will include all the 2026 racetracks, plus Imola and Portugal. Stay tuned,…
Diseño de peonza con agujero para colocar un tornillo o varilla.
End piece for a puch monza frame. is used to keep the rear tray in place in the back of the frame. Print 2 as the pegs is offset to fit when flipped.
Modelado de una peonza con un sujetador para utilizar con cuerda
The animation (GIF) shows the real motion, rendered from the same 36 positions that were collision-checked in code. The spin blur is real too: each fast frame is the average of up to 16 renders of the top across the angle it turns during…
Es una PEONZA que, si le hacemos preguntas de SI/NO nos avidinara el futuro. Funciona de la siguiente manera: 1- Debes decir la frase PEONZA, PEONZA, DIME LA VERDAD ... (y aquí tu pregunta de SI/NO) 2-Debes colocar la PEONZA entre tus…
153.72mm long, 74.64mm wide, 10mm thick, track is 5.75mm wide.
A steel rod carries the whole weight and holds everything together (diameter 10mm) The shiney tubes on which the spools run on are from a hardware store, supposed to be table legs. (outer diam. 30mm, inner diam. 28mm) The bearings are…
Replacement center stand rubber bumpers for classic Puch mopeds (Maxi, MV, Monza). Available in 10mm, 15mm, and 20mm lengths to customize clearance. PUCH 050.1.2123 15mm fixed my clearance issues with the exhaust.
Pojďte dál a Teď nerušit MODEL OD ONZA: https://www.printables.com/model/1044490-posouvaci-text
Peonza de juguete. Fácil de imprimir y sencilla de montar. Ajustes de impresión: Boquilla de 0,4 mm Altura de capa de 0,12 mm 5 perímetros 25% de relleno. Se requiere soportes PLA Montaje: Las tres piezas se encajan a presión sin…
MMU neded. Color: ⚫ circuit ⚪ numbers and "Autodromo di Monza" 🔴 sector 1 🔵 sector 2 🟡 sector 3 Put some glue before inserting the track in the holes of the base. 2 different version, one taller than the other. You can chose the best one…
So this is a wall art I found, OG creator is linked. I did NOT make this, I just customized it.
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
3D printable topographic miniature of Monza - 🇮🇹 Italy Capture the beauty of Monza 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 45.582, 9.274 (LatLng) . It is…
