Counting matching models…
This is a version of Darth Vader Fun by Val, split just below the “chin” to provide optimal placement on the print bed with minimal supports. When I first printed Fun Vader I opted to print him standing on his head with supports as it…
function open by pulling the middle out, and holding it right or left to open the opposing slot (one hand operation possible) catch the cables for that slot and move the middle to the other side for the other slot. press the middle down…
ich habe es mit 0,1mm Schichtstärke gedruckt. War im Anschluss auch wasserdicht.
This model features a somewhat optimal storage option for your paint dropper bottles. It should fit Vallejo, AK Interactive or any 24-25mm dropper bottles. The single multiboard unit allows you to arrange them in any configuration you'd…
Use PLA. My other prints: https://www.printables.com/de/social/80327-no-limt/models Like or dislike?
My original post and print settings on makerworld with many exclusive models. It comes in the perfect size with large bottom holes for drainage and ease of removing plants when they're ready to transplant. There are both normal and tall…
This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side. Printed with a 0.6 mm nozzle…
I designed this mount (copied by many) for the Oculus controllers as well as a generic and sturdy headset mount. The mount is aesthetic and sturdy. I designed it with either no hole, one hole or two holes. Touch 1 is for Rift CV1, Touch 2…
Latch for 2009 Kia Optima Center Console. I broke it in my car, FTIJPI!
Connecteur permettant d'assembler des fourrures à Placo de différente façon. Pratique pour faire des cadres autour d'une fenêtre ou d'une trappe d'accès.
Description : Donnez à votre PC une ventilation maximale avec cette grille spécialement conçue pour accueillir deux ventilateurs de 120mm ! Cette grille intelligemment conçue permet un flux d'air optimal au-dessus de votre boîtier PC,…
I am sending you an armrest insert designed by me for a Kia Optima, model year 2011-2015 (K5). The insert reaches the very bottom of the original hole. Thanks to the compartments, it is easier to control the mess inside the armrest.
If your battery tray is a chevy and its a single bolt design it should fit. I would suggest full infill and a high temp filament such as ABS
A simple adapter allowing to connect a Conveen Optima Condom Cathether to an 8 mm hose, mainly interesting for free flight pilots I suppose.
Made this for my Kia Optima rear door speaker replacement. The speaker that came off had an incorporated bracket that was a part of the speaker and a normal 6.5 inch speaker holes didn't line up. I soldered the wires to the speaker clip…
This is a shaving brush stand designed for Mühle nom OLE using Ansys Mechanical Topology Optimization. It was calculated as a solid PLA object with factor of safety about 3 with respect to yield strength. Works ok, the fit is not very…
You can also use it for scraping ice off your windshield.
Optimal Optimus Transmetal 2 (1998) Beast Wars Shoulder Missile Replacement. Lost all my missiles as a child and thrilled I could revive them again from my garage. For some reason Cura imports my model at 10% scale. Please scale up to…
This is a replacement end cap for a Swingline Optima stapler, in case the original has become damaged. Print with organic supports and a brim. Salvage a spring from a clicky pen, and insert it into the hole on the bottom. Then FORCE the…
This was just a quick attempt to attach the existing design to my Kinderkraft Prime Lite 3 stroller but it's too robust and doesn't steer. It serves just as an inspiration for making another better make. I suggest making a completely…
This is the portion of the paddle shifter that fits into the switch base of the steering wheel paddle shifter assembly. The OEM part tends to develop fatigue fractures resulting in eventual compromise of its ability to function as it gets…
This is a phone holder for a Kia Optima 2014. It's Designed for a Samsun S21 Ultra using an OtterBox phone case. It is meant to slot into the Kia center console (empty space) Note that if you print this with a .4 mm nozzle, the thin wall…
Sehr stabiler Lack Couchtisch für große 3D Drucker. Die Verbinder der 2 Tische stammen von: https://www.printables.com/de/model/297046-ikea-lack-tool-table Die Versteifungswinkel stammen von:…
I broke mine and made a better one.
Rear or Satellite Speaker Mounts with Optimal Angle Positioning Technical Design for Surround Sound Systems This advanced design offers a practical and efficient solution for mounting rear or satellite speakers in surround sound…
Buttons for Tablet Digma Optima 10.2 3Q Model TT1040MG Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No Resolution: 0.2 Infill: 100% Filament: НИТ PET-G Category: Tablet
it is a optimalised bolts and nuts container for sorting bolts.
For 2011 and similar models. This seals the engine compartment gap under the rear of the hood near the ends of the cowl (vent area below windshield). There is one for each side. This is the RH side; mirror in slicer for LH side. I believe…
you can print your own dual or more color filament ;)
Gear threads are left-handed, made to fit an Android Galaxy S8 caseless, straight gear has a small hole on one end as it was intended for another project but if works great here. While printing the holder, I did not use supports for the…
Two of these brackets mount to the side of your Yaesu FTX-1 Optima as a spot to anchor a grab handle. This is an alternative to Yaesu's MHG-1 handle. I made mine in the photos by tying a paracord cobra stitch between the two brackets,…
Those with a KIA Optima 2014 (LX and others) know that little space below their stereo. You can use it to collect business cards, parking receipts and whatever else. I needed a solution to safely store these items and I wanted to mount my…
Dies ist eine Vase mit besonderen Ausdehnungszügen und Windungen. Ich habe es in PETG gedruckt und das Ergebnis war sehr gut. Meine Frau war begeistert. Verkleinert ist er als Stifthalter ein Hingucker.
While building my Turbo Optima, I broke two of the sway bar attachments (OTW102.1 and OTW102.2). I designed parts to temporarily replace them awaiting for replacement parts. As the steering connecting rod (OT203.8) is of the same…
I designed this part to be able to add Light to my Kyosho Javelin. It should work as well with Optima and Turbo Optima (at least for the rear) re-release models. I designed a different version of the front for the Turbo Optima to fit with…
I was doing an injector o-ring job for a customer when one of the clips infront of the injector o-ring broke. I thought no big deal I'll have parts get new clips. To my surprise kia doesn't sell them anymore. The customer who was already…
Made this to relieve the cable while charging
Enhance your DJ experience with this 15° inclined stand designed specifically for the DJControl Mix ! Made of 8 easy-to-assemble pieces, it provides perfect stability while securely holding your device, even during intense use. The design…
This is a pouring aid for the Emsa Optima storage jars. I did add a V3, that is a turnable lid, for more easy everday use. Print V3 with tree support. Das ist eine Ausschütthilfe für die EMsa Optima Vorratsdosen. V3 lässt sich mittels…
Abdeckung Fensterrahmen
Eckard Specht provides an archive of optimal packings of circles in squares. http://hydra.nat.uni-magdeburg.de/packing/csq/csq.html Inspired by this github issue https://github.com/prusa3d/PrusaSlicer/issues/12462 I've filled the XL bed…
the modern soft diet leads to bone resorption. jaw trainers do not need to have a range of motion the ones that use a wide range of motion do so as a marketing gimmick that worsens and possibly causes tmj. biting hard down on this trainer…
From Tether Tools Labs, the Phase One IQ4 Adapter for Tether Tools TetherPro Optima Cables is a secure precision fit for the digital back’s USB-C port. Once the adapter is printed, take your Optima tether cable and locate the end with the…
Dieses parametrisierbare Schleifpad ist eine praktische Lösung für alle Situationen, in denen wenig Platz für Feilen oder große Schleifgeräte vorhanden ist. XGrip-Struktur sorgt für sicheren Halt auch bei längeren Arbeiten.…
Biologically optimal plant pot with planting guides. Maintain the water gauge between empty and full.
Model for the painful optimal way to fit 17 squares into a larger square which recently has become a meme, enjoy. Category: Math Art
After a while, its done! Enjoy using this model for whatever you want! Remember, the only limit to your beast wars adventures is your imagination.
wall-mounted projector screen Digis Optimal-C MW DSOC-1101 cups
This remix simply takes out a lump from the cover so that it doesn't cause the camera to think there's a flash installed
A normal ruler with lots of markings on it is actually overkill, you can make do with a smaller number of markings and still be able to measure any distance smaller than the length if the ruler itself. -Alaric Stephen I was inspired by…
This Optimax/Verado IVST tool is for taking out an oil filter in your Optimax/Verado motor works great! You might also put the infill over .25 percent, so the gears won't break hope you enjoy it! I would also appreciate it if you could…
Adds a focus ring to the camera that makes it easier to focus with your finger.
Provides a cover to your shutter to prevent it accidentally firing.
Presenting a specialized toolkit designed for seamless capillary barrier creation using injection techniques. This comprehensive set includes a silicone tube connector funnel, ensuring precise and efficient injections of…
Feet for the original Optima Elite (not the later styles like the Elite 3). Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be soft enough. If…
Spacebar bump stop for the original Optima Elite (not the later styles like the Elite 3). Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be…
Klingenhalter für Böker Optima Wechselklingen zum Einsortieren in Sammelmappe / Sortimentskoffer Print Settings Printer Brand: Bambu Lab Printer: Bambu P1P Rafts: No Supports: No Resolution: 0,24 Infill: 20% Filament: SUNLU / JAYO PETG…
Made the file from an SVG and used it for Science Fair. Optimal ground effect at around 1 chord (177.8mm) height off deck.
This is some forks for any type of battlebots, I recommend printing in PETG or PLA for the best performance! This was printed on an Anycubic Kobra with some printing fluid. I originally made this model of Beetleweights so if you want to…
Bouton chasse d'eau Siamp Optima
Custom wrench designed to easily unscrew and tighten the flush port plug on Mercury outboard motors. Makes routine engine flushing quick and hassle-free without damaging the plastic cap. Dimensions: Designed for square flush port plugs…
This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side. Printed with a 0.6 mm nozzle…
Feet for the original Optima Elite (not the later styles like the Elite 3). Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be soft enough. If…
Spacebar bump stop for the original Optima Elite (not the later styles like the Elite 3). Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be…
After a while, its done! Enjoy using this model for whatever you want! Remember, the only limit to your beast wars adventures is your imagination.
Standard Gridfinity layouts are usually restricted to orthogonal grids (like 3x3 or 4x4), which often leads to significant wasted space when you only need a specific number of bins (like 5, 11, or 17). This project breaks that limitation…
This is a phone holder for a Kia Optima 2014. It's Designed for a Samsun S21 Ultra using an OtterBox phone case. It is meant to slot into the Kia center console (empty space) Note that if you print this with a .4 mm nozzle, the thin wall…
it is a optimalised bolts and nuts container for sorting bolts.
UPDATE (11/25/24): I just fitted it to the car as seen in the photo, its a very tight fit on the MAF and the air box lid, I took both of those off the car to be able to twist it on. The inside diameter is 70mm, I'm uploading a version…
This is a phone stand using the optimal 70 degree viewing angle, it is also charger compatible!!! 15-25% infill Compatible with Nintendo switch as well!!
A Optima keychain in case you need to tell your keys apart or just want to have the logo on your key.
Pretty obscure part but it worked perfectly….. The metal retainers on a 2014 kia optima rotted completely and so i whipped these up real quick printed in pla-CF and they worked perfectly. Held the switch in nice and tight. Maybe they will…
not many options to mount the Amplifier unit so I drafted these quickly. They use 4mm bolts and have a back clamp since I sandwiched in my car soft side panels.
Hanger designed to print in optimal orientation (45 degrees). It has assembly tape recess, so the tape is invisible when you glue it to the wall. Printed in 0.2mm layer height.
Standard Gridfinity layouts are usually restricted to orthogonal grids (like 3x3 or 4x4), which often leads to significant wasted space when you only need a specific number of bins (like 5, 11, or 17). This project breaks that limitation…
This design is a light adaptation of the very good Rugged Box (Parametric) by Whity . The aim was to attach the box directly to the charger. BOM Optimate 4 Quad Program ( here ) 6 screws M3x30 4 threaded inserts M3x5x4 ( here ) 4 screws…
When replacing a standard 6V battery in a vintage car by a modern 6V Optima battery, the battery might be too low in the original battery holder. Eg. in a 1929 Ford Model A Roadster Pickup. To avoid the risk of a shortage this part will…
3D Printing Settings No supports Printed in PLA. Infill: 5–15% Layer height: 0.2 Average print time: Round box (small): 1h 20m Round box (medium): 1h 50m Round box (large): 2h 10m Round box lid: 38m Oval box: 50m Oval box lid: 30m Base:…
This is for the Cabbage Patch Adoptimals with heart pendant. There is a "heart beat" function that can be "unlocked" with a Kid's Key. If you don't have a kids key, then print this one. Not a very exciting feature, but I am sure you child…
This is a mount for the Hitec Optima 9 receiver. The receiver is held in place with a zip strip and then screwed to the surface.
Made this to organize my Optima 3D glasses for charging. Made it for 8 pairs. Works Great! Links for the USB Charger & the Optima 3D glasses are in the files. Print 2 of the Rack1's and 8 of the 3D Glass one of the Rack2 and one of the…
This is a height-adjustable socket clip, fits from 26mm to 46mm height sockets. It is based on the design and iteration from, @wuguigui and @jatkinson10 a downside of the original design was the clip attached to the base, would be printed…
For the Aqua Optima Hot Water Machines. When the tray clips eventually snap, this design features replacement hooks and a securing mechanism to keep the hooks in place. Recommend printing as a solid piece for rigidity, but 50% infill also…
I made a replica of the cap and spring to close the 2 side holes of CIFIAL's OPTIMA toilet I made in PETG Cap Infill: 15% Layer Height: 0.2mm Supports: Yes, everywhere and snug Spring Infill: 100% Layer Height: 0.2mm Supports: Yes,…
Wandhalter für Batterieladegerät Optimat 4, auch für BMW Canbus geeignet.. Print Settings Printer Brand: Creality Printer: CR10S PRO Supports: Yes Infill: 20% Filament: Sunlu PLA+ schwarz Category: Automotive
With 3D-printed lids it is always the “it will never fit my glas” thing. So if your glas ist not 4 threaded and 65mm in Diameter (including threads). Just use the oSCAD script measure your old Lids inside put this in “d=” and count the…
