278 models
Following my other voronoi style design I created this planter. It has a nice looking voronoi pattern on sides. There are two variants - one with thick ring support on the bottom and one without for easier scaling. First one is dedicated…
Print approx. €10.37–€12.67 excl. taxPreliminary estimate for one variant
Orchid Flower Decor – A graceful orchid with a modern twist, ideal for thoughtful gifts or stylish spaces. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – sleek & refined ✅ Support removal needed – be…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
The plant support is inspired by the shape of an orchid flower. Can be used as a support for climbing plants or decoration when the plant is not blooming. Printing from PLA (two colors), without supports, layer height 0.2 mm.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Clip um Ableger bzw. kleinere Äste dort hinzubringen wo sie erwünscht sind.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Please leave a follow and like! Supports are needed and a brim is optional, but recommended. Thank you for printing!!!
Print approx. €12.41–€15.16 excl. taxPreliminary estimate for one variant
Printed pots with two walls, without filling, with four lower and upper layers. Print washers in vase mode at reduced speed for exterior walls and widen the wall by 50-60% to ensure watertightness. PLA was used for printing. Printing…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
a simple but decorative orchid vase with coaster Print instructions printing should be very easy without supports and 10% infill
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
STLs available for 3" and 4" slotted orchid pots. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PLA
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Vanda orchids usually come with a stock holder that greatly restricts root growth and is very hard to remove without damaging roots. This a simple-to-print 2-piece click-together holder that has mounting holes for 1.5-1.75 mm hanging…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
simple orchid vase
Print approx. €11.82–€14.45 excl. taxPreliminary estimate for PETGSource material: PET
Ce cache pot pour orchidée contient un support pour pot standard. Cela permet au pot de rester bien droit. Il y a de l’espace sous le pot pour que l’eau s’écoule naturellement.
Print approx. €10.03–€12.26 excl. taxPreliminary estimate for one variant
Simple lamp shade designed for a flat torchiere floor lamp. The specific model is the Brightech Sky LED Torchiere Floor Lamp, but it should work for other similar lamps. Measure your lamp's head and pole to be sure. Secured to underside…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
A design I saw first on ALL YOUR TECH channel, but he never shared it anywhere even as a pay for model. I decided to make my own version. You should be able to put the soil directly into this pot without any other method of containment,…
quasar · orchid planter modern minimalist orchid planter designed for airflow, that sits elevated on wrap-around plate dimensions in mm: 100mm height ~ x: 119 · y: 119 · z: 100 80mm height ~ x: 95 · y: 95 · z: 80 important · make sure…
Great pot for orchids and succulants. Scales nicely from 50% to 150% Feet are printed separately and can be snapped onto bottom drain holes if you need them.
Introducing the meticulously designed Orchid Basket, a perfect blend of aesthetics and functionality. Crafted with precision, this model boasts an intricate lattice structure that not only adds to its visual appeal but ensures optimal air…
Orchids in nature tend to grow on the branches of trees. As a result, they need light and oxygen around the roots. Most store-bought planters don't provide the correct environment, and plant health suffers. I designed these pots to…
Vase for orchids designed for an 11 cm flower pot. I printed with a setting of 0.2 mm STRUCTURAL on MK4 without supports. I used filament https://www.prusa3d.com/product/prusament-pla-viva-la-bronze-blend-970g/ .
A blank, matte-white orchid model crafted for delicate customization. This DIY collectible captures the graceful elegance of the orchid in a minimal, smooth form—perfect for artistic expression, refined decor, or thoughtful gifts.
A pot for orchids with plenty of side ventilation. The sinewave design adds a bit of texture to the outside of the pot. Large Pot Size 152mm diameter x 127mm high Small Pot Size 72mm diameter x 61mm high Print Settings Printer Brand:…
Image of an orchid under the moon. Image was generated in Midjourney and painted in Hueforge The prompt used was: “orchid, high contrast colors, moonlight, cartoon, cel-shaded art style” I am still learning how to measure transmission…
I remixed the pot found at https://www.thingiverse.com/thing:2181381 into an orchid pot by utilizing the hole generation technique found at https://www.thingiverse.com/thing:607195 and applying it to the former model. I think the result…
This clip is a simple solution to help you grow your orchids or other similar plants in a straight way. Just use this clip to attach the plant to a plant stick. Printing is straight forward, I used PETG and 100% infill. PLA might be to…
My wife is trying to keep orchids and have them flower again. You may know that it can be a difficult task. I made this pot to help her keep the roots from rotting due to lack of airflow. So far these pots have been working out great.…
The source marked this model as adult content.
Planter for orchids. Helps to supply the roots with air. Integrated saucer.
Torchic Pokémon アチャモ also known as Chick Pokémon and Achamo Enlarge to print on an FDM printer Category: Sculptures
An orchid pot remixed from my parametric wicker cup , plus a drip tray. The open mesh of the wicker pattern helps keep the orchid properly aerated.
I took the excellent Torchic model by Fonso_s and added sunken eyes so that it could be printed to match the other low poly pokemon sets Print instructions Category: Creatures Print Settings Printer Brand: Prusa Printer: Prusa Clone…
My wife thought the "Curvy Pen Pencil Holder" by SpaceDog3D would make a good orchid pot, but it needed drainage in the bottom. This is the result. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…
Print in spiral vase mode with wide perimeter extrusions and several solid bottom layers. See my Watertight Spiral Print Profiles . If using this with a printed plant, consider printing my Potting Soil as well.
A graceful orchid-shaped jewelry stand, perfect for holding rings and necklaces. Ideal as a desk décor and organizer.
Small orchid and plant clip. Typically used to quickly and easily attach an orchid flower spike to a stake, it can also be used for other plants both indoor and outdoors. Uses a basic compliant mechanism to ensure that the clip returns to…
Should print just fine with no supports, lower layer height is better. All of my prints have been in PETG so far with no issues other than a little ugliness on the underside of the overhangs. Works well when filled with orchid bark,…
Orchid roots need oxygen and can grow out the top of a solid pot and if a pot only has holes in the sides then the roots can grow through and make re-potting difficult. With this pot air can get to the roots and if they grow through the…
Un pot pour plante, la taille est pour un petit pot d'orchidée mais vous pouvez l'agrandir sans soucie.
The source marked this model as adult content.
This is my take of a self-watering orchid pot. The evaporating water increases the humidity in and around the pot. Large and small version in 100mm and 120mm (inner pot size) The outer planter is printed in vase mode, is optimized for…
My take to the Pokémon Torchic in low poly fashion. Offered on single and multi color version. Will need some infill to support the top of the head. Should print fine without support, but a bit of support will improve the result of the…
Prints without support. By default the flower pot has a height of 160mm and a maximum (outer) diameter of around 133mm. As seen in photos I printed in dimension 1:1. Please note, that it is not designed to be printed in vase mode. If you…
A nice airy orchid basket, good for many genera. Print instructions Category: Outdoor & Garden
Trying out different twisted designs, this turned out pretty well Category: Household
My take to the pokemon Torchic in low poly fashion. Will need some infill to support the top of the head. Should print fine without support, but a bit of support will improve the result of the head. Let me know how it went on your printer…
I created this insert for my orchid so I could transfer pots. I couldn't find any inserts I like, so I made this one. I used PLA+ and sized to fit my flower pot. The file should be fairly easy to scale to fit your flower pot. The print…
A new 3D figurine generated by AI, a great orchid. Do not forget to LIKE, to download and to upload your makes, thanks ! My print is not very good, printed it too small, with an old printer ;-) Powered by Image-to-3D from MakerWorld…
Orchid pot I made for my wife, enjoy! Size: Base: 120mm Top: 160mm Height: 120mm --------------------- Printing configs: Suports: No Material: PLA Infill: 10% Brim: No
This is a two-textured pot made up of two intersecting models: a model for the top, bottom and spiral stripes which I printed with side perimeters, and a model for the sweeping sides of the pot, which I printed with gyroid infill but no…
Good for orchids with creeping rhizome that need the extra width to grow into such as a small Cattleya (Catt. aclandiae pictured). This basket is decorated with a classical Chinese swirl pattern. Print instructions Category: Outdoor &…
UPDATE 8-19-25: I added a pot with a smaller drain hole and trays with deeper cut-outs. YOU CANNOT SELL THIS MODEL! Elevate your orchids with this stylish pot! Complete with a catch-all tray for drainage and spilled soil. Scalable for…
A small wall planter for Phalaenopsis orchids to provide a more "natural" way of hanging. I had to scale it down to fit on my printer.
Fits a small orchid to hang it on a wall. Vent holes are not centered because Im still figuring out how to use Shaper3D.
I changed the size of the original model : . Height : 12cm . Top diameter : 12cm . Bottom diameter : 9,4cm and I added a saucer. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20mm Infill: 100…
Simple vase modeled after the Lego Orchid set. Very nice, should hold water if printed at a good setting. In order to keep things safe, I set my printer to 0.2mm layer height in PrusaSlicer and it ran for nearly 25 hours. This is a great…
This is a decorative basket for orchid plastic pot in which the orchid is sold. Honeycomb sells allow orchid roots get enough light. Orchid_basket_T106xB86xH111_v1.STL Bottom inner diameter: 86mm; Top inner diameter: 106mm; Inner height:…
Use these fondant cutters to form a beautiful orchid. I always use the greentec-filament because it can withstand temperatures up to 115°C and is easy to clean. Of course, any food-safe material can be used. Nutzen Sie diese Fondant…
This model is designed for two-color printing, with the flower and stem separated for a clean visual contrast and easier printing. The flower is connected to the stem using a printed joint for easy assembly and correct alignment. Test…
This is a simple clip for orchids or other plants. It will fit on approximately 5 mm sticks and can hold plants up to 8 mm dia. Print in PETG or stronger materials like ABS or ASA so you can bend it wide enough around the plant stems.
Unfortunately, we have not had much luck with our orchids in the past. When you buy them at our place, they come in the transparent pots but also immediately in a ceramic cachepot. As amateur, you take it as it is, but after the near 100%…
My Wife told Me to use My printer for something useful, so I designet it for Her. Idea is based on the one from henryk, but with slight modifications. I made 2 versions, both of them fits a 5 mm bamboo rod, the bigger opening is 10mm, so…
Designed here is a basic orchid basket to allow proper airflow and drainage around your orchid's roots that will fit inside a preexisting pot. Size can easily be adjusted to fit any outer container you please. Easy to fill with orchid…
This is an aerated planter for orchids. Print all three parts. The middle part should be printed translucent since the roots need light. Assembly The bottom part and middle part are clamped together. Pin a thick cord in the middle of the…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Torchic, Tabletop DnD miniature with or without 25mm medium base which can be used for DnD and…
0,48 line width Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution: 0.25 Category: Decor
A dry environment is not comfortable for your plants but with this tray you can increase the humidity up to 90%! You can control the degree of humidity by managing the amount of water, you can add just a spoonful of water or fill the…
I made this simple support for my flower. Can be used for hoya as well. printed on Creality CR 10 S5 laying flat. No support, concentric infill to prevent lines in between when travels. NOTE: the clips on the main picture is not my…
This cute planter is perfect for an orchid. I print them with 3 wall loops, and 15% gyroid infill.
For universal plastic vase from supermarket (example: Kaufland orchid). Vytvořeno pro univerzální plastové nádoby prodávající se běžně v obchodě s orchidejí.
A pot for an orchid. Created at the request of his wife.
A simple pot for an Orchid. Inside dimension is 58.5mm, height is about 150mm.
Great for getting lots of air to your orchid's roots 105mm diameter, 65mm high (excluding feet) Also available in small and large sizes. Print instructions Category: Outdoor & Garden
A remix from low poly vase. Made the holes to make the orchid thrive. Smaller in the bottom and bigger upwords so that orchid-moss doesn't fall out. Category: Household
Made it to print without supports, 250mm tall to fit most off the shelf printers, stretch it wider or taller for different geometry
One orchid with two stems or more than one orchid in one pot? If you want a to hold the trellises parallel you might want this little helper. Print instructions Category: Playsets Print Settings Printer Brand: Prusa Printer: Prusa Mk2…
Idea based on https://www.thingiverse.com/thing:2564910 But completely redesign For the moment diameters available : 90mm - 25 stick 100mm - 28 stick 120mm - 30 stick You will need to get Popsicle Sticks you can find on aliexpress for…
-26Feb2023 Hi everyone, The stick and semicircle end is meant to support the flower stem of the orchids, and avoid the bending of the plant when blooming due to the flower's weight. It is modular, so just print and assemble as many as you…
This is an excellent orchid pot. I found that the top rim of the original design was a bit too fiddly to install, so I simplified it. Kudos for chrido for an excellent design. Print instructions Use the original base, center and…
A remix from my triangle-low poly planter. This uses a different "relax" method. Category: Household
Used Nomad Sculpt to create a standing model of an orchid inspired by the vanilla bean orchid. Printed using Prusa MKS3+ with MMU3 at 0.2mm layer height. Used Overture PLA (Yellow, Chocolate Brown, Olive Green) with full supports made of…
Flower pot with hex design height 90mm, diameter 100mm prints without supports
An upload of the model by https://makerworld.com/en/@tama on MakerWorld
Flower planter (pot) siutable for orchids and other plants with simillar requirements. Model consists of 3 pcs - water tray, sticky planter and top ring to stabilize sticks. Enjoy
A small plant pot made for orchids and other plants requiring lot's of drainage. I've printed this using 100% infill and clear PETG filament to allow light into the roots.
A pot designed for Orchids with a base with a slight step in it to centralise the pot.
Great for getting lots of air to your orchid's roots 138mm diameter, 85mm high (excluding feet) Also available in small and medium Print instructions Category: Outdoor & Garden
Designed in a mixture of mesh tools and Fusion360 this was harder to get to work than I'd like to admit, but i'm pleased enough with the result to share it. Multi-color done in the slicer with a height modifier.
Sweet Orchidea .. picture generated by AI ############################################################################# Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black…
I designed this for growing my Tolumnia orchids but it'll do a good job for any small orchid which requires a lot of air circulation around the roots. 81mm in diameter, 50mm high (excluding feet) Also available in medium and large sizes.…
a open flower power pod for orchids. i own only only so no idea jet if this is optimal Print Settings Printer: Tronxy X5S MGN Custom Rafts: No Supports: No Resolution: 0.2 or lower Infill: 20%+ Filament: Noname PLA Transparent Notes: make…
A simple vase I designed for my orchids. It feature some ventilation holes and a dish. It is recommended a transparent filament, as orchids roots also needs light.
Automated active self-watering orchid system. Orchid is placed in the top half, the bottom is filled up with water. A lid separates the two parts. At set day intervals, the water is pumped up and soaks the orchid for 2 minutes before…
I made this vase for orchids as they like to have it dry and "airy" My printer is not that good for these hollow structures but ill hope I manage to tune it for abs sometime and smooth it down with acetone. Category: Outdoor & Garden
Model resized/remixed based on following thingiverse model: https://www.thingiverse.com/thing:4580757 Couldn't find a copy here on printables. Great for larger orchid plants with a well developed root system. Just be careful not to upsize…
A large pot for orchids could be scaled down if needed. It will need rubber feet or to be put onto a drainage tray for water drainage. Seen pictured with a Banfieldara orchid.
Thin and easy to print orchid pot and tray. 130% size is around the avarage pot size. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 280 Infill: 20 Filament: PolyMaker PLA Category: Outdoor…
The Kakapo's Orchid Planter for Oversized Orchids The planter was born as a solution to save our dying orchid. It needed space and the old plant pot wasn't going to fit it. This 6-inch beast is not only satisfactory for the orchid but is…
This is a plant pot holder, attachable to windows through adhesive strips, e.g. to hang orchids on the window pane. It's sturdy enough for lighter plants, like orchids. I've used two Pattex adhesive strips, 20x40mm (1mm thick)) per pot…
