Counting matching models…
🇮🇹 Benvenuti a Firenze! Welcome to Florence! One of MiniWorld3D's most popular models is now on Printables! Our Florence Cathedral model has been printed by makers all around the world for more than 5 years. The Cattedrale di Santa Maria…
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
*** New collection of 8 plant pots - https://www.prusaprinters.org/prints/127174-plant-pot-collection *** The "Florence" plant pot / planter is 7cm in diameter and 6cm in height. The design is a solid shape, giving more freedom for wall…
Update 8.3.24: 1. Ich habe die Torführungen überarbeitet. In den neuen Führungen laufen die Tore wesentlich besser. Die Dateien habe ich ausgetauscht (Torfuehrung_rechtsN, Torfuehrung_linksN). 2. Ich habe neue/andere Tore als zusätzliche…
🇮🇹 Architectural Wonder This model was created by Logan MDR The original MiniWorld3D Florence Cathedral model has been one of the most popular ones for many years – here is a fresh new approach, sure to catch the attention of both…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
Wer den LED-Frame for IKEA SKADIS pegboards gedruckt hat und nach selbst geduckten Diffusoren sucht, ohne fummeln in die kleine schiene, kann die hier gern nutzen. Es werden die einzelnen Dateien wie folgt benötigt für die Skadis 36x56cm:…
Weiter geht's mit meiner Reihe von Gebäuden, die mit Hilfe eines Lasercutters und 3D-Druckern erstellt werden. Diesmal ist es eine Halle mit beweglichen Rolltoren für LKWs, die z.B. als Feuerwehrhaus, THW-Unterkunft, TÜV-Prüfhalle,…
Replacement Forend for Brownings with cracked wood. Part is oversized for sanding to custom fit. Detent can be made from a nail and spring.
EDIT 4/23/2025: Thank you Dawid Kowalski for providing an accurate reference for the heads side of the coin. The final coin of the set, perfect for tossing at any Witcher. The Floren is a currency of The Witcher 3: Wild Hunt. I couldn't…
I really wanted to print my own Magpul forend for my Mossberg 500. Unfortunately, my tube was the shorter 6 ¾" length which meant I needed to purchase an adapter or a whole new longer tube. I decided to remix the Magpush by Cursd using…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
Este llavero ha sido diseñado y fabricado con dedicación utilizando la tecnología de impresión en 3D de vanguardia, lo que garantiza una calidad excepcional y detalles precisos. Puedes elegir entre dos materiales resistentes: PLA o PET-G,…
This is a printable version of the standard AP900/ Air Venturi Alpha forend/ fore grip. The M Lok is functional and the location for the standard magnet to secure the folded stock is included. Additional reinforcement is included that…
Designed this replacement cover for the Fiat Ducato / Citroen Jumper to have a nice outlet for the 2 USBs from my new radio. It replaces the original Fiat part # STP10400 or 1315515070 You can insert two USB extension cables and secure…
Full Image Catalog The complete gallery of my works can be found at Portfolio . You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi Unicorn model turns the mythical creature into…
Front and back of a Temerian Oren, with cameo lyrics from the Netflix show. The regular files are for FDM printers with a 0.4 nozzle, while the resin file has much much finer detail. Print the front and back and then glue together. Coins…
Löffel und Einsatz für Chunky Flavour von More Nutrition 90 g Dose Man findet viele Einsätze für die 150 g Dosen, aber nicht für die 90 g Dosen, die wir haben. Deshalb habe ich einen neuen Einsatz designt. Der Löffel ist ein Remix von…
🦸 Dummy 13 – Superman (2025 James Gunn Version) Take your collection to heroic new heights with this Dummy 13 remix inspired by the 2025 Superman suit from James Gunn’s DC Universe reboot. Designed with sharp details and articulated…
Hinges for Thorens turntable dustcovers, for models TD145, TD160, TD165, and TD166 Mk II, with a number of improvements and a similar look and feel to the original. Prints well in both PLA and PETG. Stronger hinge pins, correct alignment…
Hier ist nun endlich der 3D-gedruckte Anbau zur 3D-Gedruckten https://www.printables.com/model/1104926-anbau-zur-fahrzeughalle-mit-bewegl-rolltoren (beide sind auch als Lasercut-Versionen verfügbar) Mit diesem Anbau, der genannten…
Cathedral of Santa Maria del Fiore in Florence, reduced to a small, clean object that keeps its main shape and character. Part of the Mini World collection — The model is simplified for a reliable print at a very small scale. Print tip:…
Repair gear for rear wiper motor part number 98700-3e000 987003E000 For cars Kia Sorento Hyundai SantaFe 88 teeth 53.6(7) mm diameter 10mm central shaft hole 7mm side shaft hole 5.45 angle
Escudo San Lorenzo de Almagro Category: Signs & Logos
Immerse yourself in the rich history and architectural beauty of Amsterdam with this meticulously crafted 3D print replica of the iconic Westerkerk tower. Capturing the essence of Dutch heritage, this model showcases the intricate details…
Tool for installing/removing forend nut on a Mossberg 500 shotgun. There's a hole in it you can put a screwdriver in to help you turn. I didn't realize I would need one to put on a new forend grip, so I threw this together. It's 3AM. It's…
Here's why I designed it the way I did: Keep things organized even if the box was stored vertically Fits sleeved Leader cards (but I don't sleeve my development cards) Coins and Resources are split into two trays, one for each side of the…
The Baptistery of Florence as a small jewelry box. I wanted a box to give my wife an anniversary gift in while visiting Firenze. So I created this little box of one of the many iconic buildings of that city. Print instructions…
Photomacrographic L-shaped ruler with alternating black bars for measuring heavily over- or underexposed photographs and 3 crosshair circles to assist with parallax correction.
Gear for meat grinder Zelmer, Gorenje. Diameter - Ø32/Ø62 mm; Number of teeth - 19/74; Height - 24 mm; Landing on a shaft - Ø7 mm.
Plant pot in doll size (1:6) inspired by the IKEA Forenlig Plant pot. Scale 1:6, without supports, material PLA, layer height 0.2 mm. When printing, reduce the speed for better quality. You can also find another minis on my Printables…
I've made the model rotated 180 degrees so its surface turns out cleaner Category: Accessories
This is a tone arm rest for the Thorens TD160 turntable. The shape is not a direct clone of the original, but a more practical shape for FDM printing. The suggested printing orientation on an FDM printer is big flat side down. There are…
Stand for the Corentium Home Radon monitor from Airthings. It's a good monitor but it's a bit silly they don't include a stand for it. So I made one. Fully parametric design, I included the Fusion 360 file, have fun. I look forward to…
This model has been depreciated: see https://www.printables.com/model/1288871-dustcover-hinge-for-thorens-turntables-new-version for the updated version. ----- A redesigned hinge for Thorens turntables models TD160, TD165, and TD166 Mk II…
Replacement cover for the Fiat Ducato / Citroen Jumper to have a nice outlet for the USBs from the radio. A remix of the original one because I only needed one outlet Edit: Added a Cover without holes
0.8mm walls, available as 1cm and 3cm tall. Can also be used for cookies. Printer currently out of service, finished print coming soon
Hangend ornament van de Utrechtse Dom toren. Ontworpen zodat hij in het LOMVIKEN 13x18 fotolijstje past van de Ikea . Perfect voor een echte Utrechter. Kan geprint worden zonder support en 15% infill is genoeg. 0.2 mm layers en dan na 1mm…
Don't you love it? Magnetism? Electronics? And 3d printing? In this project I combine all of them together to a little but spectacular do-it-yourself experiment. With just a few components and the 3d printed part you will be able to build…
Simple replica of the Thorens hinge because mine broke. You need a 3x21mm pin for the hinge.
Thanks to Andy24CZ for their design on Thingiverse (https://www.thingiverse.com/thing:2837102), I can take no credit for the design, or my very minor updates. This model was Eggs-cellent!!! Andy Designed this for his Electrolux fridge, it…
The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…
I have increased the drainage hole for the wall mounted bracket, and the wall bracket by 2mm each side
Náhrada zavírání mrazáčku v lednici značky Gorenje.
The original bean hopper for my Fiorenzato AllGround Sense was a tad to big for my taste. This is an alternative hopper. I did use some dense foam (2mm) as a seal, so it doesn't rattle and is as airtight as the original one.
Tired of digging through powder avalanches to find your scoop? 😅 This holder is designed exactly for the new MoreNutrition Chunky Flavor jars – because all the models I found were either too big (for the large jars) or made for the old…
Thoren's GIAFT Puzzle Box (Easy/Novice Level) This Puzzle Box contains 3 compartments of various sizes. It requires 21 Actions to access all 3 hidden compartments. The Puzzle Box can be easily returned to its original "mysterious"…
Divides the console storage container into two cup holders. For the XM 2013/14 series Kia Sorento facelift.
Einfacher Druck evtl. Brim erforderlich Standardwerte für PETG benutzen
Desenhei a peça e imprimi em petg. Já fazem mais de 4 anos que a peça esta lá e não quebrou até agora esta com 4 ou 5 paredes e infill alto impressa com o lado superior na mesa
A better fit for your YETI Rambler Colster in a Kia Sorento cup holder. You should print this in ABS or PETG, to handle the higher temperatures it might see in your car.
Reinforcement part for the dust cover of the Thorens TD160, 145 or 165 turntable. Mirror the model for the left/other side of the dust cover. Depending on the diameter of the pins, the cover travels on you have to sand down the lower part…
These upper hinges fits perfectly to orignal lower hinges on Thorens TD-146 MKV. In STL model are both right and left hinge. I recommend to print with 100% infill.
This is a sliding sign to indicate whether people may be disturbed or not disturbed in the Dutch language. Met dit schuifbordje kan men aangeven dat met niet gestoord kan/mag worden. Keuze tussen ‘ Welkom ’ en ‘ Niet storen ’ Filament:…
So habe ICH die XY Motoren meines Druckers exakter eingestellt und kann jetzt auf verschiedenen Längen auf 0.10mm genau drucken: (1) Drucker mit Kabel und der Software "Pronterface" mit dem PC verbinden (2) mit "M92" die Werte des…
If you like the well known boardgame THE LOST RUINS OF ARNAK you might prefer a nice little dovetail box for your players stuff, too. The box has 2 compartment. One for the basic deck cards and one for the other player stuff. We printed 4…
Rack for the dumbbell set from decathlon. The model has two parts. the lower part is 1.5mm thick and can be printed in TPU with a simple filament change. Only works with filaments that sick to each other. PLA und TPU should be fine. You…
"It uses the existing 4 screws from the original forend on the Takedown." Print Settings Printer Brand: ELEGOO Printer: ELEGOO MARS 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 40%+ Filament: ALL PLA or PETG ALL…
Das 3D Druckteil ist ein Originalnachbau des Kurbelhalters für die gängigsten Lammellenstoren. Stangendurchmesser 16mm. Lochabstand 35mm Lochdurchmesser 4.2mm Kannten alle abgerundet Ich habe das Teil mit einem SLA Drucker gedruckt. FDM…
45T center Thorens 166 MK2 - Centreur pour 45T sur platine Thorens 166 MK2
Coat of arms - Florence Znak - Florencie
Die meisten Soliaire-Spiele am Markt sind für ältere Menschen oder Personen mit Einschränkungen nur bedingt geeignet. Dieses Steckspiel wurde für Menschen gemacht, deren Feinmotorik und deren optische Fähigkeiten eingeschränkt sind. Die…
Replicated Miniature model of the Martinitoren in Groningen, The Netherlands Original (wooden) model can be purchased at xsModelmakers.nl Two models included, all in one piece or separate pieces with some nubs and holes to fit the pieces…
Ville de Florence en décoration Mural. City of Florence in Wall decoration.
optimizado para imprimir 3 piezas y pegar, las piezas multicolor se pueden realizar con extrusor único agregando cambios de filamento o pausas en las respectivas capas
I made gorenje door shelf simple slide, probably can be used for different fridge types too. Its top shelf and fully size printed diagonal. Model Clean without text. Size 460 x 50 x 108mm Model printed with layer 0.24 Wall thickness used…
Es wird noch im Mai eine neue Version des Filament Umspulers geben. In dieser VErsion ist der Motor und die Sensoren integriert. Das ganze wird sehr viel kompakter sein. https://www.wendelgass.com/3d-druckwerkstatt Diese Anleitung ist…
That is an attachement which alows the varius Gorenje cordless vacuum cleaners to use standard accessories.
Lorenz(mod1) Strange Attractor Bead + Learned how to fix Skinned Converted curves to meshes. - First (Clean Up) Merge By distance .1 or .01 Then Fill holes (0) -always re-mesh after necessary subdivisions (think I used .03 voxel size)…
BGE623 Side Mirror Repair Gear 876101U060, 876201U060 for KIA Sportage Sorento 2011-2016 Sonata 38-Teeth Outer Diameter:32.40 mm
There are 3 alternatives. The numbers at the beginning of the files indicate their alternative numbers. Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.2 Infill: 30…
The lever of my wife's old Thorens turntable player (TD 280) broke, so I designed and printed a replacement lever. A small hole allows to fix the lever using an M3 stud screw (optional). You may minimally scale the model to fine tune the…
Print instructions: For the Balls, walls needed to be thick to print properly so a transparent filament like natural PETG is recommended with a low layer height, part cooling fans ON, and speed set as high as the machine can handle (I…
It's a knob for a Gorenje oven. You need to cut a metal sheet 1.5 mm thick to the dimensions of 8x17 mm and insert it into the hole in the center of the knob, Or instead of the metal sheet, you can print it from PETG.
Hang it on a real screw. No supports needed.
This is a direct replacement for the standard forks that come with the All Ground Sense. Simply fits over the standard button head screw that holds the regular forks in place. Designed to fit a 58mm blind shaker (mh3-bomber variant). Your…
Spacer to help correctly situation my iPhone 14 Pro on the charger, so I get the proper warning when I leave it on there
Gorenje Fridge Door Shelf Made to fit to my Gorenje fridge, however I'm sure it will fit to many fridges from many vendors. Just check out dimensions from drawing or its screenshot. Gcode is sliced in PrusaSlicer 2.6.0 alpha3 for 0.6…
Parts List Inventory of all parts needed for a full, mounted set of 12 wheels: Printed Parts Thumb Wheel (12) Separator (6) Assembly Wrench (2) End Cap (2) Stand Bracket (2) for each wheel x (A, B, C, D, E, F, G, H, I, K, L, M): Wheel x…
General The lorentz transform, time dilation, and length contraction are essential to understand how the universe works and why space and time are actually like two sides of the same coin (spacetime). At the heart of this all it the…
glue the metal plate with epoxy glue
3D Name of 'Florence' is 264 mm long x 50 mm high x 20 mm deep. Created using SketchUp with the Arial Bold font. Print instructions This model was sliced using SuperSlicer for the ironing feature. I suspect that PrusaSlicer will get it…
This is an upgrade/remix of @EricD_165800 churrosaber. This is the ChurroRengade. The body has been split in two so each part can be printer separately. There are two versions: 1 with a screw on top, and the other is a slip on top that…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Ersatz Griff und Feder für Gorenje Gefrierfach
If you like the well known boardgame THE LOST RUINS OF ARNAK you might prefer this card holder, too. The game cards fit perfetly. You need at least three pieces of this holder for the different game cards. Enjoy and have fun! Material:…
Facil de imprimir en 3 colores con cambio de capa
I printed with magic PLA 3DJake with 3 walls and 3 top &bottom layers with 5% lightning infill with layer height 0.3mm. Recommend printing with a bit higher temperature on hot end for better layer adhesion. I used some old magic 3dJake…
A magnetically attached ruler to help scaling parts, etc. when taking photographs. I used the change color feature in Prusa Slicer to get the black lettering. Requires 2 X 8x3 round magnets.
Multicolored ACF Fiorentina logo, made for my kid who collects logo's. After he finished his “Eredivisie logo collection” he wanted a “Serie A logo collection” so here is one of the logo's. Print Instructions Print in 0.2mm layers, and…
Block Rail - Basket Guide End for Gorenje Dishwasher [275586/02] This part as well as many other parts in dishwasher wear out over time and break Original part costs £13.96 https://spares4gorenje.co.uk/block-rail-basket-guide-end-gorenje…
📝 Description / Descripción ENGLISH Say hello to Oren, the chill and music-loving character from the Sprunki Collection! 🎧💚 This 3D model is designed for multicolor printing, with separated parts for easy color customization. It’s…
Printed with ASA with 0.2mm layers and it fits and works perfectly.
![Dustcover Hinge for Thorens Turntables [New Version]](https://media.printables.com/media/prints/d8deb748-421e-460d-90ef-f3488e6d455c/images/9702157_c18b3f7a-7586-4100-ba66-bae22906b9ac_6ce68b7a-c3f8-45a9-bd5e-87b14a0266a3/new_thorens_hinge_2025-may-07_02-38-16pm-000_customizedview2241933857-1.png)
