6,552 models
UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Print approx. €8.76–€10.71 excl. taxPreliminary estimate for one variant
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
harry potter tags for Christmas, Pendants or keychains
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Nativity Ornament with Star Hanger.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
Nativity Angel loop on back so you can hang it on the Manger scene or from a tree.
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant
This is an ornament to hang on your Christmas Tree. It has inner rings that can spin and a small snowflake in the center that can also spin.
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Nativity in an Acorn Ornament.
Print approx. €7.50–€9.17 excl. taxPreliminary estimate for one variant
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
Print approx. €20.74–€25.35 excl. taxPreliminary estimate for one variant
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
On my MK3S-MMU2 at the 0.15 layer height the print takes some 20hrs to complete. I have printed in PLA, using White, Red and Galaxy Black.
Print approx. €15.03–€18.37 excl. taxPreliminary estimate for one variant
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
This is the second in a series of four spiral ornament designs. With my settings, it weighs just 7g. This season, I plan to publish one Christmas ornament a day. Follow me to stay up to keep up to date. I originally printed my stretch…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for one variant
A model by my 15-year-old son. This interesting and functional spinning globe ornament was made after learning how to project a two-dimensional image onto a spherical object. A map of the world being the most obvious candidate for such an…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Christmas ornament tree Print instructions PLA white infil 10% detail 0,2mm
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Yes, you need supports. Use paint-on supports to create flying buttresses that not only keep the icicles adhered to the bed, they keep the tiny arms of the icicles from breaking. I've provided a screenshot of how they should look. I've…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
You can print this without support. I printed it on the XL but it should be fine on the MK4 or other printers as well. If you scale it down, it's also a nice Christmas ornament. If the hole is too big you can add a modifier in the slicer.…
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Remake of a model from Thingiverse. I made it smaller, thinner and added a chamfer to the outer edge. Print instructions Two color print from the single STL file is done by using a cylinder modifier for the middle area of the model.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This is Universal ornament hanger. It consists of two parts - cap and hook (hanger?). Cap is designed to be printed in spiral/vase mode. Original file is pretty small with internal diameter of 7mm or so (depends on extruded line width)…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Here's an ornament for your Christmas tree, to commemorate the birth of Jesus Christ. JOY is written in the Asul font, with a nativity scene in place of the O.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This design is based off of the Super Mario character, Princess Peach, I printed it with a .6mm nozzle, but you will get better details with a .4mm nozzle, I used White PLA, so Christmas lights would show through the design and make…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
A fun Christmas ornament for 2022. Better late than never. I included an optional 2023 version if you want to make one for next year. Thank you so much for stopping by!
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
Christmas Krampus Plaque Decoration / Tree Ornament
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Tofaş Rearview Mirror Ornament
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
I made this Christmas Ornament for my Christmass tree :). It's pretty easy to print. And sturdy Just use Vase mode. I was printing in on 0.2 layer. You can use brim to hold it better to the build plate Also I uploaded newer version of…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Christmas sweater ornament commemorating the day of deliverance by our savior John McClane in Nakatomi Tower. I don't have a multi-filament printer so instead of switching filaments I just used a sharpie to run across the tops of the…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Happy Christmas
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I remodeled these to have a translucent backdrop and a white top with a filament switch. They look great on the tree with the see through back. Print instructions I printed this in PLA the backdrop was ZIRO 3D PLA Twinkling Color Series…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
20 cm, topper, house number, bookmark, stencil
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Ornament You can customize. How to customize with Fusion360 Just download bombka.f3d file and edit sketch with logo. How to customize without Fusion 360 In Your favorite editing software create a cylinder with diameter 100mm and height…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Native American Design Elements Santa Skulls 3 Christmas Ornament
Print approx. €9.05–€11.06 excl. taxPreliminary estimate for one variant
💂 Introducing the Print-in-Place Nutcracker with Movable Mouth - a festive 3D printing delight that combines the magic of the holidays with the ingenuity of modern technology! 🎁 Prints from head to feet, ready to print without…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Whether you want to hide a small object that nobody notices or want to bestow somebody with a little gift in untraditional packaging, this is an ideal option for you! For fastening, simply twist both halves. Printing Designed to be…
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant
Colorful folding Christmas decorations. Three sizes. A bit of patience is needed for the assembly. Superglue can help for sticking together but it is not necessary if you bend snap ends and slide them into the lower part.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Here are three beautiful ornaments for the tree! The closed version (center in the picture) is the easiest to print. I've provided my Prusaslicer 3MF files and Prusa MK3S+ GCODE in addition to my STL/OBJ files. If you try importing the…
Print approx. €6.57–€8.03 excl. taxPreliminary estimate for one variant
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
This lamp is meant to be used with common LED tealights. It consists of a inner shell, where the tealight can be placed. The outer shell gets slid over the inner shell. The two parts can still be rotated between one another, so you can…
Print approx. €3.79–€4.64 excl. taxPreliminary estimate for one variant
Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This is a remix of Q52's fantastic Prusament Spool Ornament, but with a screwtop design that eliminates the need for difficult-to-remove supports. The “bottom” can be printed with a layer colour change to print whatever colour of filament…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Hi all! I wanted to do an ornament for my Christmas tree made with my hobby, and when trying to figure out I start thinking in a spiral shape. I made the design, smile to myself, and said: "This will never print...". But I wanted to see…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Ukrainian Folk Design Santa Skull Ornament.
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
Peace on Earth Ornament Celebrate the festive season with a meaningful touch by displaying the “Peace on Earth” Ornament. Designed to embody harmony, this all-white, elegant ornament is adorned with the famous saying: Peace on earth and…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
20 cm, topper, house number, bookmark
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
20 cm, topper, house number
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
20 cm, standing, toppers, stencil, bookmark, house number
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would like to personalize it. Print instructions Category: Decor Summary Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
Print out amazing looking infill based decorations or ornaments with (almost) any design! Made entirely inside of Prusaslicer. Designed for the 2023 Holiday Decorations and Necklaces and Pendants contests To print one of these simply load…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
Bring the joys of patching home with this commemorative holiday ornament! I know that there are a lot of us out there that are tired from the tireless efforts of patching and dealing with “logj4” and to commemorate our efforts I put…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
This 3D model features a charming decorative female gnome, perfect for holidays or simply adding a special touch to any corner of your home. The gnome wears a pointy hat and detailed braids, with a relaxed pose that gives it a friendly…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
This design has complex geometry reminiscent of an old lantern. Rotate it - it looks different from every angle! With my settings, it weighs almost nothing. This is the second in a series of four lantern ornament designs. This season, I…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
Grinch Christmas Ornament Added strings and made the Grinch different type of ornament Be sure that you have arachne on in your slicer Keep the speed in normal range 60 to 100 mm/s No supports are needed If you have multicolor printer in…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Customized version of the Spinning Christmas Ornament by ChoPrints. Thanks ChoPrints for the original model! Replaced the loop with 2025. Thinned out the model a little so it can be mailed with a card too. Needs to be < 1oz with a card…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
This model includes four separate .stl files , each corresponding to a different color. I printed each part individually on my Ender 3 Max Neo and then assembled all the pieces like a puzzle. The result is a clean, multi-colored design…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Great original model by Printin' Monkey . I decided to make a Vulnerable Ghost Ornament to complete the set. The files are labeled by color. Add a small amount of glue to attach the parts together. Print the small parts slow and let the…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
We have created a unique decoration for your Christmas trees. Hangable infill ornaments will make your Christmas time even more charming. You can have fun showing them to your loved ones and explaining their meaning. The models are 7cm…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Hello Everyone! Every year I try and make my gym-toting family member a fun gym-themed ornament. Last year it was the barbell weight. This year is the Christmas Dumbbell!!!! This ornament comes in three pieces. Each side and the handle…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Crystal christmas ornament
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
In collaboration with @Nuvz we created a lightweight and thin ornament for sending in your holiday cards! Should fit a standard wallet size photo (2inx3in or 75mmX50mm), slide the corners into the slits and send away to your loved ones…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Luke Ornament als Weihnachtsbaumschmuck. Die Schrift ist die Star Wars Jedi Schrift von DaFont. Ca. 10cm hoch. No supports needed/keine Supports nötig.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Update: I have added a new 1.5 version of the model (scad, stl, and gcode files). I redesigned the base part and I believe it works better in every way. This ornament prints flat in a snowflake-ish shape, and can be hung up as a…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Instructions I recommend printing with PLA instead of PETG. The PLA doesn't string too much and the layers don't stick together. The standard ring distance is 0.4 mm. If you have a problem the layers sticking together, try second version…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Jack Skellington Christmas ornament Be sure that you have arachne on in your slicer Keep the speed in normal range 60 to 100 mm/s No supports are needed If you have multicolor printer in the slicer you can add colors Njoy Below is the…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
A chrisbaum for your christmas tree ;-) The chrisbaumi is the little brother of the chrisbaum. It can be hung in the Christmas tree. Before you should use it as Christmas tree decorations, please decorate it first. The candles from the…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This is a variation on my Cathedral Christmas Stretch Ornament. The only difference is that this time, the windows are open so you can see through them. The design looks great in any kind of filament - multi-color,, transparent, rainbow,…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
0,2 mm Schichtdicke keine Stützen erforderlich Ich habe die Glocke mit PLA in mattem Hellbraun gedruckt, wodurch sie aussieht, als wäre sie aus Holz gearbeitet. Die Datei „Körper_Rahmen” muss insgesamt sechsmal gedruckt werden. Sie ist…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Christmas Card Reindeer (singe extruder print) Multicolor by layers: White (I use fluorescent white) Red Black Take an ornament for the Christmas tree from the postcard!
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Orange christmas ornament
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Ornament of musical instrument - CIMBALOM Multicolor by layers (simple extruder)
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Add a festive touch to your holiday season with this charming 3D-printed Snowman Set! Featuring a versatile snowman design, this set includes both a coaster and a hanging decoration, perfect for winter vibes. Printed with a 0.4mm nozzle…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
ALICE (CERN) Christmas Ornament Christmas ornaments inspired by the ALICE (A Large Ion Collider Experiment) experiment at CERN. Available in three versions: regular, thinner and closed. All version can be printed without support. .3mf…
Print approx. €2.07–€2.54 excl. taxPreliminary estimate for one variant
This truck needs no support. It has a hole in the top for the wire hook. If ambitious, you can paint the lettering and/or the USPS Logo. The logo and small print are better suited for printing with an AMS, if you have one.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
2021 Badge for Filament Spool Ornament, I'm sure there are better ways to do this. New to 3D printing and thought I would share. Really wanted an ornament so thank you for creating it.…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is based upon my Fermat Swan spiral. The body is hulls around spheres whose diameter matches the spiral's thickness. Everything is then settled onto the build plate. It prints with a brim.
Print approx. €4.32–€5.29 excl. taxPreliminary estimate for one variant
A Meeple christmas ornament with a hole for a string to put it on a christmas tree.
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
This is from my Openscad Cornicopia design but adds an attachment loop. When printed in three colors, it resembles Candy Corn. You can print this with or without the ring. If you print it as my photos show, it will hang more horizontally.…
Print approx. €5.57–€6.80 excl. taxPreliminary estimate for one variant
This is a commemorative ornament for Christmas 2024 that supports multi-colored printing without the use of an MMU or AMS. Each color layer is printed at a different height to allow for color swapping. This model supports up to 7 unique…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
This is my new christmas present name tag for this year. It represents a christmas ornament. You can change the name in your favourite slicer. I use prusa slicer.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
images of Morgan Wallen tour shirts on four sides of Holiday tree ornament built in MS Builder
Print approx. €19.79–€24.18 excl. taxPreliminary estimate for one variant
A STYLE COLLECTION HOME Christmas Ornament is designed to bring modern sophistication to your holiday décor. The Hexagon ornament showcases a bold, geometric shape with a smooth matte finish—elevated by a silky strap that ties the design…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Mary Poppins Earrings / Ornament
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
christmas ornaments three designs for christmas ornament spheres dimensions in mm: ~ 76mm diameter there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside,…
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
