Counting matching models…
The modular version of the mount features a clever dovetail design that allows multiple units to be joined together seamlessly. This modular aspect offers flexibility, enabling you to create a custom arrangement of multiple walkie-talkie…
This is a remake of my 70 mm PSU cover for the CHENGLIANG P360W24V used in the Sovol SV06 (https://www.printables.com/de/model/341847-sovol-sv06-psu-case-cover-for-silent-70-mm-fan-and). By using a 92 mm fan, the fan speed can be further…
This is a case cover for the CHENGLIANG P360W24V power supply from Sovol SV06, with a hole for a 70x70x10 mm fan and a step-down converter (LM2596 HW-411). There are holes for fusible nuts (M3 with 4.6 mm outer diameter). Unlike the…
After I made the 70 mm and 92 mm Version of the PSU fan case, I got a request for a 80 mm variant from PatrickE which is exactly this one. I did not test it myself, but PatrickE confirmed that it fits and also provided the pictures, thank…
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
This is a remix of felixna's model with an added slot for the fan's cable as suggested by Thomas Albrecht in the comments of the original model. The notch is measured from a Noctua Redux fan, but it should be very similar for most fans.…
This is a 92mm fan mod for the common Cheng Liang P360W24V power supply. The assembly requires you to have the following items: 4x M4x30 or M4x40 (with spacer) flat head machine bolts 4x M4 washer 4X M4 nut 92mm fan optional mesh for 92mm…
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
I designed this for the Cheng Liang P360W24V power supply, commonly offered with Creality's Ender 3 printers, for a stand-alone mount off the printer. It should fit other 'thick as a brick' printer power supplies of similar design.…
72 mm between centre of bottom bumps. It's very easy on the pedal to accidentally switch modes between effects and volume, this prevents that. Printed it at 25% infill, and it had just enough flex to allow a hard press to still switch…
READ THIS BEFORE YOU PRINT Parker Torch DSP360 DSP360-A-24-P10-80ER is missing the drive roll for 0.035" wire standard. As of this writing my torch came with 0.040" or 1mm drive roll which is useless - literally useless - in North…
Ender 3 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
Hexagonal and square gate for the Happ P360 arcade stick Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 100 Category: Video Games
This is just a very simple cover/cap those massive XHP360 flashlights. Maybe having the model will save someone the 5 minutes it took me to make.
I can't guarantee accuracy as I no longer own this PC to make changes and to test them. This was my first attempt. It's a very snug fit. One of the tabs did snap off during installation so I think they are either slightly too long or off…
