7,416 models
I needed something like a panel-latch for a not-a-voron. I was using RichardM's Voron 2.4 Filament Latch on my Voron. I thought about modding his for my purpose, but decided to re-implement it myself and make some improvements. Heavily…
stackable storage box with japanese influence update · added STLs photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims or supports the top section (in brick red) has different…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
[Update] ---2024/05/10--- Free 3mf file released!! If you want to make multiple prints, use various 3mf for Bambu and Prusa. This is Flexi Japanese Dragon. This model is based on Japanese dragons, especially those of Katsushika Hokusai:…
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online. Multiple sizes,…
stackable storage box with japanese influence #2 update · added the STLs, including 2 new grid options (grid 2 and grid 4) photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims…
This fastener is sized for a 6mm hole, with a 14.1mm head diameter. It can be scaled as needed. The model is based on the dimensions of Honda part no. 90683-GR1-003. I used it to attach body panels on a Honda CBR929RR. Compared to other…
Overview This is my second version of the Ring Lamp. First version is available here: https://www.printables.com/model/929809-ring-lamp In the beginning I wanted to change only a base and add some new Halloween panels in the Ring Lamp but…
Overview This is my Christmas set of panels for my Ring Lamp It work with Ring Lamp II available below - there are files for lamp and instruction https://www.printables.com/model/1043648-ring-lamp-ii-with-halloween-panels The panels work…
Introduction All other modular Skadis models I have found either omit holes, or split holes down the center at the seams. I didn't like that look, so I created my own from scratch. Before I start, there's a lot of documentation here, not…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
Until you find a purpose for the hole in the right panel of Core One, this cover will keep dust out and heat in. I recommend printing it in PETG or any filament that can withstand 55°C of a fully heated chamber.
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
10-inch patch panel with 12 keystone module space. It's designed and created with OpenSCAD. The standard unit width is 44.45 mm, but to save some space for my very small network rack, I used 30 mm. You can change the module_count variable…
A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
Greebles! Entry panels, hatches, and more! No support required Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff: Construction: Building under…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
A Japanese castle inspired tower to roll your ttrpg role playing dice. 4 seperate pieces, pre-supported, pre-painted .3MF files. The bottom 3 pieces fit together snug, the top roof piece is looser so to be removed for larger dice,…
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
If you like, throw a hungry student a Tip so i can make more cool stuff! :) https://paypal.me/jpal85 40x14mm, 3mm thick base. Uses M3 hardware. Prints fine without supports at 0.2mm. Takes about 24 minutes at 65mm/s. Some off brand XT60's…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
This spacer helps reinforce the edges of the panel for mounting hinges or providing extra room for an internal spool holder. Recommend knurled heat-set inserts with this spacer unless you select the M3 nut version. If you have never done…
Supports required for the bushes and roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is my personal take on a traditional Japanese Oni mask — reimagined with a modern, stylized edge. The fierce expression, sharp horns, and aggressive curves were all sculpted to bring out that intense, demonic presence. Whether you're…
The Rigid Molle Panel For Custom Organization V2.0 is a remix of my model Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution: 0.20 Perimeters: 3 PEI magnetic sheet Bed Temp: 60c…
Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…
You can see a great example of this HEX Panels on Engineericly 's YouTube Channel. I printed mine with 100% size (you see it on the pictures), but next time I would rather use 120% or more, because it makes threading the LEDs easier and…
3D Printed shelving system with snap together parts. https://youtu.be/xgLI_G_G63o https://youtu.be/Rua7R26Sotk https://youtu.be/c63ayOe9OTc Customization Basic Panels 1x1 (Use for test prints) 2x2 3x3 4x2 4x4 5x5 6x1 6x2 6x3 6x4 6x6 7x7…
– Edit 01/08/2024: Added 10 PrusaXL versions (300mm x 300mm, 11.8 inches) of the panels, they can be found over on their own model page here. Based on the panels featured in this Youtube Video by 3D Printer Academy and not being able to…
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Hexagons maker everything better! Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping…
It is ergonomic thimble (finger guard) It fits finger rather well, as it is not round in cross-section (similarly to most fingers) It has: -dimples -concave top to push needles -ring guarding somewhat from slippped needle injuries -ribs…
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
Unscrew the panel clip every time you want to fix something inside the voron chamber is not fun so that is why you are here. These will replace the left, right, and top panel clips. Use same screws same t-nuts but you need 4 pcs of 6x3mm…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
Enjoy this nice japan pattern
The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…
Ever since I learned about kit cards I wanted to make one of my own. I tried to fuse my love of traditional Japanese woodwork and joinery with the art of 3D printing and create a relatively flat kit that allows you to build and snap…
Make the Prusa CORE One your own! Our new printer is designed with modders in mind. Since we’re using proper metal almost everywhere, you can easily design all sorts of holders, organizers and shelves, and attach them using magnets to the…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
The Parabolic Wave Grid Panel #1 features an intricate parabolic wave pattern, created by extruding squares at varying heights. This versatile design looks incredible in various finishes, including tricolor filament, color-shift pigments,…
Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Forgot to order patch panel for my new 10'' rack server case… therefore i've made one. Suitable for 12 keystones no matter if HDMI or RJ45. Using keystone model from: https://github.com/marcuswu/RJ45KeystoneReceiver
2024 revision: 16 port version now has cable strain relief I published a revised version of the 16 port model with cable strain relief features (and a few other small improvements)…
Cover Panel for 5.25 inch optical drive pay on a PC case. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same hook-length for their Drive-Bay covers. Measure the hook positions of the drive-bay…
Remix of glsf91 model https://www.printables.com/model/138644-solar-panel-water-draining-clip-for-flat-roof This model fits 35-40 mm panels, 8 to 12 mm lip. Measure if this fits. Should fit DEMGC 485, 490, 495 W monocrystalline panels.…
I printed my clips out of abs and glued them together with superglue! All super glue is not created equal in the case of abs locktight works wonders. These clips were used to put the panel back in the drivers side foot well where the…
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
This model was made for those of you who do not want to buy those expensive wall panels. I decided to model these for a similar look and ease of use/installation. Measurements/Requirements: I modeled this to fit the Ender 3 3d printer.…
10" Server rack 1U panel - Tray Designed 2022.09 thing:6196392 printables:569024 TOC 10" Server rack 1U panel - Tray TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel generic trays Description Trays for 10" server…
We all have many tools lying around and often we put them either in drawers or just being messy at the table. I liked this idea because of the slotted design that don't require very complex geometry to mount the pegs or anything to these…
Masonry/stone wall panel for tabletop gaming terrain builds. Default 134 x 134 x 3.0 mm. Scale and trim using slicer as required.
Things you wanted to know before: Be aware of the effort involved in this project, you can't just put everything together in 10 minutes. You should also be good at soldering and know how to handle cables. It took me about 3 hours to…
edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…
I needed some blank panels for my large-ish eurorack cabinet, and while they seemed like the perfect thing to 3D print I wasn't happy with any of the designs I found, so I designed my own. Included are several variations in sizes, and the…
This box is inspired by Japanese locking lid tool boxes. This is an ingenious locking mechanism and it is simple yet elegant. Your fitment may vary. Depending on 3D model settings and different filaments, you may have to slightly adjust…
If you have a Creality K1 SE printer and want to add an enclosure for ABS or ASA prints look no further. I used Henlor's CAD model as reference to the panel removed all chamfers to the bolt holes to satisfy Sendcutsend's website. Also,…
The XT60 connectors are glued into the printed parts. I used a 2-component epoxy adhesive. Uses M3 countersunk head screws.
Star Wars episode 8 & Andor Droid Access Panel This a basic "Free Version". The Full Multi-Part Version is linked here https://retrorhobbies.etsy.com/au/listing/4300398181/star-wars-droid-access-control-panel Retro Realistic Hobbies…
Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…
Unfortunately my P1P is not coming until January, so I can't fit and check the parts yet. It would be good if someone could print and install them so we can check the fit. Important Update: 23.01.2023. Printing these Files is complicated.…
This model is a simple 12 port patch panel which can be printed easily without supports. Print with 0.2mm layer height. Fits on a Mk3 printer if oriented diagonally. Will fit slightly bigger printers in default orientation. The model is…
Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…
Solar module drain clip for 30mm panels. Wonderfull in flat roofs (<30º) It drains the panel completely avoiding accumulation of dust. Insert it in the lowest panel side. Solar module drain clip for 30mm panels Tested with AE Solar panels…
The Honeycomb wall attaches to the side of the Prusa Enclosure, to provide attachment point for any of the HSW compatible tools. The sub panels lock together to create one continuous uninterrupted Honeycomb Wall. No need for…
You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the side and back panels for the CFS riser. You will need to print 3x Left…
I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Important: Voron Design "Cable Frame Anchor" model has been modified to make this convenient and easy to mount panel clip. Support my work by purchasing printed parts from layer.guru - premium quality custom printing services. Suitable…
Introduction I recently picked up the Lian Li A3 case for a Computer I was building. Unfortunately, the wooden front panel offered by Lian Li wasn’t available here in Germany. As a maker, I couldn’t just leave it at that. So, I designed…
Check out a new puzzle box here Inspired by a random Reddit post, I designed this from scratch. There was no reference so it's mostly trial and error with additional locks. Please make sure to split the file into parts in your slicer, not…
simple panel key with a hold to attach to a key chain
Bring the power of Japanese folklore to life with this Japanese Oni Mask . Inspired by traditional demon masks, this detailed model features sharp tusks, fierce eyes, and intricate ornamental patterns that make it a striking display piece…
I designed this Rigid Molle Panel For Custom Organization in SOLIDWORKS for the Printables Ropes, Cords & Straps Gear contest. Design software: SOLIDWORKS Slicer: Prusa slicer Printer: Artillery Genius Pro Nozzle size: 0.4 Resolution:…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…
Inspired by the existing thing that costs way more than it should, i designed this hook to be stuck between 2 mdf slats of an acoustic panel. I am not equipped to do weight tests, but it should be enough to hold large picture frame. I…
Supports required for the roof. Great detail and easy to remove supports. "Tree supports on build plate only" Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Please check back periodically, as I will be regularly adding more panels! As always, I'm open to suggestions. Feel free to drop requests in the comments! And, if you would like to support my work, please visit my Ko-fi ! - RAF = OnShape…
…Please be sure to hit like & post a make, I'd love to see your prints! For use with model: https://www.printables.com/model/594894-voron-24-trident-canopy-top-hat-remix-split-model- These clips will keep your top panel sealed & secure in…
NORM Hexagonal modular wall panels
olar cell, solar panel, 0.2w , 5w, 10w, 20w, 30w, 50w, 100w. Typical sizes in monocrystalline taken on Aliexpress.
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
This Centauri Carbon panel hinge set is an improvement over our original version. The most significant improvement is the drop-pin feature, which now enables the panel to be quickly and easily removed. Designed for a 7.5 mm spacer. Here's…
A Japanese shrine gate made for mothers day. Can be used as desk ornament or, if your like my mom, in the garden. Simple glue construction makes it an easy to make multi-color and print without supports. -Scalable -Easy to construct…
Update #1 I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel. If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand,…
Been looking for a way to display my diecast collection with the help of 3D printers. Discovered IKEA Skadis boards and all the cool items made to be used with them. Been looking for some designs to print my own boards and I liked Asraff…
A 8-port, 1/2U, keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others…
Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…
a320 Overheadpanel (Not completed).
I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…
Cover insert for a switchboard when there is an opening after a removed circuit breaker. The model is attached so you can adjust it to your desired width. The insert is not too stiff not too flexible, so perfect to be placed in place and…
FT PANEL CLIPS (for 2020 extrusions) FT Panel Clips work with Voron 2.4 / Trident or any other squared frame printer using 2020 extrusions. They have been designed to remove the need for any hardware (hammer head t-nuts and screws).…
Introduction The two models provided here are simple test prints to find out how a lithophane will turn out with a specific filament and illumination. All Lamps of the Solar System Lithophane Planet Lamp Collection use a maximum wall…
