109 models
Simple low profile stand for the 11th generation (2021) Kindle Paperwhite. Might work with earlier models, but YMMV. STLs are provided that hold the device at 60°, 65°, 70°, 75°, and 80°. Original design file is parametric as well for…
I made the 3D model from scratch but got the idea from Kindle paperwhite 4 grip. PLA. Took about an hour to make. Fits the kindle paperwhite 11th generation. 74.2 x 124.6 x 8.1 mm Slight issues with model that do not effect the print or…
Warning This case is intended for use with the Kindle Paperwhite 11th Gen (2021 edition). It might work with other Kindle models, but there are a lot of variants out there with small but significant differences. If you decide to print…
I printed it from PLA, and it is a tight fit, but it works. I'm also planning on printing it in ABS too, because it is less rigid. TPU would be the best, but I don't have that for now. I recommend drastically reducing printing speed…
my take on grip for 11th gen paperwhite.
Just a nice simple case for the Gen 12 Kindle Paperwhite. Printed in TPU. I used tree supports for the charge port and power button holes. But if you have better luck with bridging TPU you can probably get away without supports
Simple remix of BenHSmith13's case with the honeycomb cutout which removes the cutouts and has a completely flat back. I also made a slight edit to the bottom of the case because the original had a first layer that was much smaller than…
I needed a simple grip that would enable me to use the Kindle one handed including page turning. After a while holding the kindle, it slips from my grasp especially when reading at night. Whilst a side to side grip would be easier to…
No problem with printing speed 50-80 mm/s, possible to print much faster close to 100/140 mm/s with little quality degradation. 3mf file for Orca Slicer Printer: Bambulab X1 Layer height: 0.2 mm No support, no brim Temp: 220/20 C Bambulab…
Wanted to stand my kindle up so I can read it whilst im stood at my desk. 5 min design. Please post a make if you do one :D
This is an STL for a Kindle Paperwhite (11th Generation model M2L3EK), I designed to use as a digital mold to make a case.
Added the kindle tree to the kindle stand instead of the "KINDLE" name
I adapted the grip to fit the protective case of my Paperwhite 7 (inner length 174mm), as well as my fingers (19mm gap). Made the ends of the frame very thin so that I can still fully close the lid of the case. I cut the grip into two…
A simple sleeve for the Kindle Paperwhite 2021 SE Gen. 11. I usually throw my Kindle into my backpack and since I do like to read without a case I needed a sleeve, so I made one. Mine is the "Signature Edition" but I guess it fits the non…
I prefer using my Kindle without a case, but wanted something to keep it safe while stashed away in my bag. Instead of buying a fabric sleeve, I decided to make a hard shell. This was designed around a Paperwhite 3, and probably won't fit…
Deutsch: Für das Kindle Paperwhite der 10.Generation, welches meine Frau von mir bekommen hat, habe ich - genauso wie für meines der 11. Generation - ein Case entworfen, das das Kindle nicht nur schützt, sondern dieses auch günstig,…
Check out this near-exact 3D replica of the Amazon Kindle Paperwhite (6) 12th Generation (2024) model! This high-quality 3D model, carefully crafted by SQi and is perfect for sizing or creating custom-designed cases, covers, and more.…
Kindle Paperwhite Stand I have an older Kindle Paperwhite from 2015, according to Amazon a "Type : Kindle (7th Generation)" and the two stands I tried did not fit properly. I also wanted a stand where I could press the power button…
Two new alternative Models available (blank and QI-Charging, but both in a more kindle like shape): https://www.printables.com/de/model/995169-kindle-paperwhite-5-11th-gen-tpu-case-qi-charging So recently I stumbled across this nice model…
The Paperwhite is very light weight but very hard to hold. These grab bars solve the problem. I liked these 2 designs, but they didn't work for me. They inspired me to create a new model.…
stand for kindle paperwhite update · added STL bambulab 3mf file that has the settings below: - 0.16mm layer height - Bambu PLA-CF - 10% gyroid - no-brim should be able to accommodate higher layer heights, but not by too much in order to…
I don't enjoy having an actual cover attached to my kindle while reading, but I'm also not comfortable throwing it in my backpack coverless, so I quickly designed this case. It has quite a snug fit but it does slide easily, so I added an…
Deutsch: Für mein Kindle Paperwhite der 11.Generation habe ich erneut ein Case entworfen, das das Kindle nicht nur schützt, sondern dieses auch günstig, schnell und einfach mit einer kabellosen Ladefunktion ausstattet. Im Vergleich zu…
Custom 3D-printed case designed for the Kindle Paperwhite 11th Gen. This sleek and functional case offers a snug fit to protect your Kindle from scratches and wear. Printed with a 0.20mm layer height for smooth details and durability.…
Warning This case is intended for use with the Kindle Paperwhite 12th Gen (2024 edition), the 7-inch display model. I haven't tried it but it might work with other Kindle models, there are a lot of variants out there with small but…
This fits for me and my kindle Paperwhite Gen 10
The best cases for the Kindle were for the Kindle Paperwhite 11th Gen (2021), but I have a Kindle 10th Gen (2019). So I printed a case adapter for it! Started with the f3d files from the Kindle Love Handles , and made lots of changes to…
I had some issues with my kindle, not being able to hold it correctly without accidentally pressing the touch screen. I tried a couple of the available designs, but i decided to design something that combined a slim case with some grip…
A one handed grip for the Kindle Paperwhite 2022 (Gen 11), inspired by similar models, made in Fusion360. This is a fairly rough attempt at making a working grip for a Kindle Paperwhite 2022 (Gen 11). The fit is quite tight so it should…
An overhead holder for Kindle Paperwhite. Kindle can have its standard sleeve on it. Easily mountable and removable. The other end fits at least Ikea's wall mountable shelf. Category: Household Supplies
This custom-designed Kindle 10th Gen case is a dual-layer protective solution, combining a flexible TPU inner shell with a rigid PLA outer cover. The inner TPU layer securely holds the device, absorbing shocks, while the PLA booklet-style…
Recommended to print standing on it's side longways with a substantial brim.
Stand for kindle paperwhite. The 2021/2022 model fits well. Older can also fit. comfortable angle to view the book cover
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
Inspired from Kpix : https://www.thingiverse.com/thing:4642986 This is for the kindle paperwhite integrated in its casing (ie 13 mm thickness, i made provision for 13.5mm in the design) Priting time 3 hours 36 minutes, 40 g of PLA with…
He aquí otra versión modificada y mejorada de mi anterior diseño para el ereader Kindle Amazon de 10ª generación . Tiene dos caras; una con la inscripción “Kindle” y la otra con “Tablet”. Se ha diseñado para usarlo con la funda. Here's…
This is an original design but I took major inspiration from @skino's Kindle Paperwhite Stand . This model fits the 12th gen perfectly at a 25 degree angle. Features: - Stable - will not fall backwards by accident. - Grips the reader with…
Print out left and right holder and attach to wall or bed with double-sided tape at the correct spacing. Slot width: 14 mm. The rounded edge belongs to the front, the sharp edge is the adhesive side. Print settings: PLA 0,4 mm nozzle 0,2…
Kindle Paperwhite 7th Gen case / Kindle Paperwhite 7. Generation Hülle Added honeycomb structure to the back. Cheers to junaling for the original model! Pictures: printed in Anycubic PLA blue on textured print sheet
Kindle Paperwhite 5 grip inspired by eg. https://www.printables.com/model/112664-kindle-paperwhite-4-grip I was not satisfied with projects that were on the internet, as none of them really suited my paperwhite and needs. (I like to read…
My second Kindle E-reader; I put a lot of miles on both of them. After perusing the printable stands available to me and realizing that many do not accommodate a case, I chose to design one. I printed this using a 6mm nozz and 2mm Detail…
Mount for Kindle Paperwhite (6in) using the T-clip system. Has a hole for the charger. No support. 20% infill.
Kindle paperwhite case with a simple graphic design. Printed with PLA - it will probably work with any rigid material. You can orient Kindle in any 4 directions Optimised for a 0,5mm nozzle size: 1,05mm wall thickness (two perimeters).…
Remixed from Jakub Genza's model to fit the Paperwhite 11th gen. If you also want to use the lid from the original model, you'll need to extend the length to accomodate the lip. However, I find that it holds perfectly fine without the lid…
Accurate STEP for Kindle Paperwhite 10th Gen (2018) for case design and accessories.
Kindle Paperwhite cover Category: Gadgets
Basic wall mount Kindle Paperwhite with leather official case. I used 3.5mm wood screws, you could just use double-sided tape.
Case for Kindle Paperwhite 2021 Es un remix de https://www.thingiverse.com/thing:4714265 Instrucciones de montaje: Review:
Here’s a super simple wall mount I whipped up for my Kindle Paperwhite (DP75SDI – 3rd gen Paperwhite, 7th gen Kindle). I made it to hold my Home Assistant dashboard because, let’s be honest, I need my smart home controls within arm’s…
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
This is my 5th Kindle Comfort grip; I've been using a version of this for the last 5 years. Its main feature is a protruding handle where your fingers can grab, vs others that hang on your hand.
This custom-designed Kindle 7th Gen case is a dual-layer protective solution, combining a flexible TPU inner shell with a rigid PLA outer cover. The inner TPU layer securely holds the device, absorbing shocks, while the PLA booklet-style…
Update: Neues kompatibles Case verfügbar! → https://www.printables.com/model/995169-kindle-paperwhite-5-11th-gen-tpu-case-qi-charging Update: New compatible Case available! →…
I created two versions of this holder. One for the reader without the case and the other for the reader with the case Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
I wanted a place to store my Kindle so I hooked it on the bed.
This is an all in one package for the kindle paperwhite. I have a PW6 model (2025), so not sure if it works for others, but feel free to let me know if it works so we can widen support! minor protection substantially thicker integrated…
Kindle Paperwhite holder. Use superglue to stick it to any surface. It fits snugly with the cotton cover. I have no idea how it fits with the other types of covers.
A skeletal case for my little eBook reader. v2 UPDATE: Man that first one sucks to print. This one is split up into multiple parts that print without supports & lock together. Put a bit of webbing or a ribbon thru the ladder lock buckle…
I used a Gridfinity Creator 5x3x2u Solid Bin as a base to create this Kindle bin. The kindle is pretty much exactly as wide as 3 units, so there is very little room left for walls. In my print they are just one wall and it can be a bit…
Cover for a Kindle, tested on a Kindle Paperwhite (7. generation). It simply clips onto the reader. For convince, you can also attach it to the back, while reading. Printed with Polymaker Polyflex (TPU 95A). You should also use a rather…
Simple kindle stand model. It's my first model ever but looks ok. Printed with fuzzy skin, 100% infill, no supports needed.
Kindle paperwhite 11th gen case, sample printed in Bambu purple PLA matte at 0.08mm layer height on an A1 mini. I have printed a few device cases in PLA matte and they tend to look great, but are a bit brittle. I recommend bumping the…
A wall holder for a Kindle Paperwhite (PW3) with slots for a page turner and its remote, to keep everything in one place. The holder is attached to the wall using 3 command strips, but the holder could also be used without attaching to…
I printed it with Print a Lot PLA Flex but you can print it with TPU or regular PLA.
This is a flexible protective cover designed specifically for the 12th-generation Amazon Kindle Paperwhite (2024 release). It was printed using soft and bouncy TPU 85A, which provides a snug yet forgiving fit. If you choose to print with…
I like reading at night before going to sleep, but I always forget charging my Kindle. I created this simple dock that can be attached to the nightstand with a couple of 3M Command strips (or whatever you prefer). So whenever I am done…
This is an adjustable stand for the most recent iteration of the Kindle Paperwhite. The print consists of three pieces--a base, a back support, and the reader holder. The reader holder cradles the Kindle and has a cutout to accommodate…
There are plenty of other stands for the Kindle Paperwhite but I had to make my own. I wanted one that had a slot in it that would allow for the kindle to sit horizontal or vertical. I also made the slot a bit larger to accommodate many…
This holder allows you to keep your kindle in your A5 filofax. Best to print top and bottom upright. Use superglue to assemble
This is a simple Holder for a Kindle Paperwite 11. Gen. It fits the Kindle with its Case. The holder comes with a print in place insert.
My 6" paperwhite is great and handholds like a comfy paperback, but sometimes I just want to have it mounted to read from. With my case ( https://a.co/d/hrmqW80 ), the kindle is about 14mm thick and the mount has some wiggle room for a >…
A protective case for the Kindle paperwhite. Mine is a 12th gen PW6. I'm pretty sure older ones have the same form factor but I can't confirm. Intended to be printed with flexible filament. Does not require supports except for the…
I printed this kindle case a while ago to protect my kindle when slung in a duffel bag, so I can already say it has worked for a few years. I lost the lid a while ago, but actually you don't really need it anyway. A fun thing about this…
A simple geometric case for the Kindle Paperwhite. Print it flat-side down with supports. The V2 fits almost perfectly on the Kindle! However the bottom is just a little bit loose, due to the way I designed the geometry - stick a small…
Honeycomb storage wall holster for Kindle Paperwhite Gen 6. Includes the peg, prints pretty quicky. The walls are 1.6mm thin, so best use 4 perimeters at 0.4mm nozzle. Looks good above 0.2 too, I have mine printed at 0.24. Used PETG.
Remixed to fit the Kindle Paperwhite 12th Gen, this should fit both with and without cover. Added USB C charging cutout. Changes from original: Resized to fit Kindle Paperwhite 12th Gen Added USB C cutout Added f3d file
Wall mount for Kindle Paperwhite v6 (PW2).
A sleek stand for the Kindle Paperwhite (12th Gen). The stand has a minimal footprint. The model includes a non-slip mat, but can also be printed without it using supports. The front is decorated with a pattern to hide layer lines. The…
Ultimately, the model from AndrewFromOz was the simplest and easiest to print one hand holder for the Kindle. I resized his model to fit the newest generation of Paperwhite (11th generation, 2021). The piece for the fingers is identical…
## Printing Printed the case from TPU (actually must be TPU, otherwise won't fit on the kindle due to the case being stretch for mounting). Just used my A1 Mini with some generic TPU. I needed to flame the etches a bit to remove…
Here's a Kindle stand I drew up, as I wanted to show off my cool backgrounds I can get through KoReader! Hardware: 2x M3x12 Machine Screws 1x USB-C Rectangular Cable (I used one from a sony product) Happy Printing!
My wife's Kindle had seen quite some use and the edges began to crack... Some hot glue and these edges made it ;-)
Inspired by a model made by @Denitz which I've used for some time until it wore out. The original had an issue that the device would slide out if tilted, which was annoying at times. My model was designed with two small inner latches…
I printed it from 98A TPU, but PETG and ABS should work as well. PLA probably would be too rigid.
kindle paperwhite 4 etui back replacement Front is still original. I used 3M 467MP to join printed back with original front.
This is a simple, easy-to-use holder made for the Kindle Paperwhite 12 , designed to work with a 3D-printed articulating arm. The idea was to make something that grips the Kindle nicely without scratching it, using smooth side clips and a…
A little cover for Kindle PaperWhite 7" (12th Gen - 2026)
Designed to clip on when your cover is closed, and when it is open.
adapter for KPW 1 to fit KPW 11 case.
Minimalist case for the Amazon Kindle Paperwhite (7th Gen), modeled in Rhino and printed on Bambu Lab A1 mini. The snap-fit is simple yet sturdy. The bounding box measures 123 x 175,7 x 12,1 mm.
A simple Kindle Paperwhite 3 (7th Gen) stick on/glue on mount. I wanted to mount my Kindle on my exercise bike to get some precious read time while I work out. This part is specifically made to snugly hold on to my Kindle Paperwhite 3…
I commute on the train a lot and needed a stand for my Kindle Paperwhite. I couldn't find out I liked so I designed this one. It is basic but does the job nicely. I have also added the Openscad code.
Ich habe mich immer darüber geärgert, dass das Kindle Paperwhite und die Signature Edition so schnell auf den Ausschaltknopf reagieren. Schon wenn man mit dem Finger dran kommt oder es kurz irgendwo auflegt, schaltet sich das Kindle aus.…
Place your kindle on the table while the power button remain free from accidental clicks. Fast printing. Support required.
The original would not fit on my printer so I modified it to remove the cover flap.
I seem to rest my finger on the top bezel of the Kindle, and my new Paperwhite 12th gen has such a thin bezel that I'm always triggering something on the touch screen. This grip/bezel extension thing solves that. It's got a few little…
My kindle has around 14mm thickness cased, this model has 14.5mm to have some extra room
