Counting matching models…
This parcel was designed to fit several different kinds of items including spool holders, keychains, and other such items that can qualify for cheaper canada post rates. I made it to allow me to offer free shipping around Canada on the…
This is originally designed for the Renault Megane, although it is very likely to be the same for other models (like the Clio).One of then can be printed in less then 15 minutes. I chose to print these in ABS-GF for strength, rigidity and…
A fully 3d-printed lightweight package opener.
Don't need glue or anything to hold it ,recommend using either 0.1-0.3mm layer height and add supports.( If it's hard to install then you should try and trim the edges of the long part that goes into the part.
Rear Parcel Shelf Bag Hook for BMW G31 / F31 This hook is designed to attach to the rear parcel shelf cover in a BMW G31 / F31 , providing a simple and practical way to hang shopping bags and keep them from tipping over in the boot. It…
I create this model for my friends Nissan Note and I wanted to share inspiration to something
Parcel Shelf String Pin Volkswagen Golf IV etc Držák plata pro VW Golf IV a podobné vozy 1J6863449B
Replace your broken or missing parcel shelf clips with this precise 3D-printed version. Designed specifically for the Fiat Grande Punto , this clip ensures your rear shelf stays securely in place, functioning just like the original OEM…
A replacement clip for the Ford Puma parcel shelf in the UK
i needed something else then a sticker…….. so i found this one is the perfect one to stick it on the package box With thanx to Paulham
Parcel toy models in different sizes: 20x20x20mm, 20x10x10mm, 10x10x10mm. Originally created to fit in the Siku DHL truck with trailer (Siku 1694), but they can also be used with other 1:87 models. --- Paket Modelle in verschieden Größen:…
Remix of https://www.printables.com/model/334791-toyota-auris-parcel-shelf-left-clip to be used on the right side of the parcel shelf. Should be printed in ABS or stronger material, PETG could probably also work. Orientation as in the stl…
This is sign for if your not home you can put this near your porch so that your delivery will be safe on or in your porch.
Repair bracket for the parcel shelf to reattach the lifting string after the original mount has been torn out.
USE NEW V2 FILES First version had split lower part for faster/easier reprint in case of broken part (again) but it turned out it is also super weak point of whole part at the same time. New V2 version has lower part as one piece and…
Do you have a first generation Chevy Trax or Buick Encore? Maybe you live overseas and own an Opel Mokka or a Holden Trax? Have you broken the pegs that hold the string that holds up the package shelf? Want to avoid a visit to the dealer…
Absurdly simple design. Just a tapered peg with a flat edge for easier printing! Dreadful original clip design, despite very sound bonding of the string into the clip and also a very nicely sewn loop at the other end. Spoilt by stupid…
OEM replacement parcel shelf clip. Advised to print in a rigid TPU to prevent rattling for best results.
Parcel Shelf Pin for Mini Cooper R56 This bolt/pin is designed to securely hold the rear parcel shelf in place in your Mini Cooper R56 (2006–2013). It ensures stability and proper fitment of the shelf, helping maintain the vehicle's…
3D Printed Parcel Shelf Hinge Replacement This is a 3D printable replacement hinge for the parcel shelf trim—designed to replace broken or distorted OEM hinges without the need to purchase an expensive new trim part. Instead of replacing…
replacement part for a fiat grande punto or punto evo Printing settings: Print in PETG or higher temperature material 4+ perimeters Supports everywhere print laying on its side
Parcel Tape Dispenser Roll and Distance spacer sleeves for 100 mm width since the original broke. can be printed without support. Would recommend PETG due to its lower stiffness compared to PLA
Citroen C3 parcel shelf clip. Needs also couple of small 120 mm zip ties. (1 x 2,5 mm)
This is a small plastic release clip (or anchor) mounted on the inside of the tailgate. Its function is to pull the cord attached to the rear parcel shelf, causing the shelf to automatically lift when the tailgate is opened. This…
The clip for the parcel shelf in my BMW I3 broke and I was not able to find an OEM replacement so I made one :-) The BMW part no. for the rubber buffer is: 51466967605 I used a shoelace for string, and I can recommend using this (…
This is a replacement parcel shelf support peg / boot privacy cover clip for the Nissan Micra (K12, ~2002–2010). These small pegs often snap off, leaving the parcel shelf (boot privacy cover) unable to rest securely. I could not find a…
I amended the clip locations (left and right) for the Q4 Etron (mines a leased 2024 45 sportback). I removed the pins as these wouldn't fit through the holes in the shelf itself and being a lease I didnt want to be drilling new mounting…
One of the strings holding up the parcel shelf in my Kia stinger had torn off. The factory ends are melted onto the rope and can't easily be replaced/re-attached. This fits inside the factory rubber “housing” (very snug, had to use pliers…
I designed replacement parcel shelf hinges for the Hyundai Accent hatchback, since the originals on mine were broken and I couldn’t find replacements anywhere. Compatible with 2003–2005 Hyundai Accent hatchback (may fit other years, but…
If you have a Mazda3 and the parcel shelf in the back has a broken peg, this may be the solution for you. You'll have to remove the trim piece, drill out the existing hole to 10 mm (25/64") then pop this in from behind. It's meant to be a…
Replacement Parcel Shelf Hinge Clip for MG ZS (2021). Just superglued into place.
Parcel shelf rope clip for a Mazda 3 Gen 2 (BL) hatchback. The OEM clip is in two parts, encasing the rope. Once the cover is removed you will see that the rope is deliberately split towards the tip so that there is a ‘hole’ that the rope…
A 3d letter and parcel box to print for your postbox or similar.A 3d letter and parcel box to print for your postbox or similar.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Saw one of these in metal, figured I could create and print one. Printed in PETg to deal with the internal car temps. Using paracord and break-away buckles from Michael's. UPDATED 8/4/17 - Resized screw to fit better and hopefully hold up…
Common problem for VW Golf 5 owners The parcel shelf clip tend to brake over time. If you like this model, please leave a like or post a Make!
This parcel was designed to fit several different kinds of items including spool holders, keychains, and other such items that can qualify for cheaper canada post rates. I made it to allow me to offer free shipping around Canada on the…
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Open packages quickly and confidently — without sharp blades or risky box cutters. Our 3D printed Parcel Opener is designed for everyday convenience, combining safety, durability, and modern minimalist design into one essential tool.…
You know models can be licensed, but not ideas..... Honeycomb Package | Parcel | Letter | Opener Video This 3D-printed letter opener / package opener is a simple but practical desk tool designed to open letters, envelopes, and small…
Supports required and brim is advised (Place the opener vertically) Material: PETG/PC/PLA depending on how durable you want to make it Infill at least 40% Layer height 0.2-0.25
This is originally designed for the Renault Megane, although it is very likely to be the same for other models (like the Clio).One of then can be printed in less then 15 minutes. I chose to print these in ABS-GF for strength, rigidity and…
A fully 3d-printed lightweight package opener.
Don't need glue or anything to hold it ,recommend using either 0.1-0.3mm layer height and add supports.( If it's hard to install then you should try and trim the edges of the long part that goes into the part.
Supports required (Place the upside down) Material: PETG/PC/PLA depending on how durable you want to make it Infill at least 40% Layer height 0.2-0.25
Rear Parcel Shelf Bag Hook for BMW G31 / F31 This hook is designed to attach to the rear parcel shelf cover in a BMW G31 / F31 , providing a simple and practical way to hang shopping bags and keep them from tipping over in the boot. It…
german version below Pins to connect the parcel shelf to the trunk lid. Fits for 2016 FIAT TIPO station wagon and various other types. I suggest to print in PETG (TPU is not strong enough). Pins zur Verbindung der Hutablage mit dem…
I designed this parcel shelf holder replacement clip to closely match the original. I might update the model in the future if I find ways to improve it. This version uses a screw instead of the original clip system—it's more secure and…
Replacement for the stupidly designed clips used to hold the parcel shelf onto the strings in the boot on the Mk8 Fiesta Ford Part Number 2423830
I create this model for my friends Nissan Note and I wanted to share inspiration to something
A simple replacement/fix for broken parcel shelf clips on the Ford KA Mk2 (2008–2016). I designed this part after the original clips failed and replacements were difficult to find. The model is made to be easy to print while still being…
Seat Ibiza parcel shelf clamp Tested on seat ibiza 2018 model and seat ibiza 2024 model, probably also works on more cars from the Volkswagen group. Printed with PETG, flexible material is required to bend the part, this is so it is only…
[PL] Opis projektu Stwórz własny, miniaturowy punkt odbioru paczek! Ten model 3D przedstawia charakterystyczny automat paczkowy DHL. Jest to doskonały projekt dla każdego fana logistyki, kolekcjonera makiet lub jako unikalny gadżet na…
[PL] Opis projektu Zbuduj własny Paczkomat! Ten model 3D to wierna miniatura ikony polskiej logistyki – Paczkomatu InPost. Idealny dodatek do makiet miejskich, dekoracja na biurko lub świetny prezent dla każdego, kto regularnie odbiera…
I had issues with my car's parcel shelf popping out from its mounts completely through daily use. I've designed these extra tethers to keep the shelf in its mount even if it comes loose. Print in any heat-resistant material, like PETG,…
Hooks for BMW E36 Compact Parcel Shelf. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Category: Automotive
Its a part for broken parcel shelf for Audi TT mk1. I recommend to use two component glue, super glue and silicone will not work well. Category: 3D Printer Parts
These are replacement clips for the parcel shelf strap on a Vauxhall/Opel Corsa D. There's the upper clip (the part that attaches to the hatchback boot lid) and a matching lower clip (the part that attaches onto the parcel shelf). These…
Better replacement part for parcel shelf string holding clip. Screws in instead of a clip in installation. OEM part number: 1m6867574a
This is a replacement for the rear Parcel Shelf Bearing Clip of an Opel Corsa-B and Tigra-A. As you can see in the photos the original part (on the left side) snapped off. So I redesigned that part to make it a bit stronger and also spare…
Not mutch to say , its a sign. Print in PETG or ASA for outdoor durability (ASA is the best choice however I made mine in PETG) 0.4mm Nozzle and 0.2 layer and 3 walls and a color change from 2.2mm to 3mm Happy printing
Filament: ABS Layer thickness: 0.20 mm Filling: 100%
Requires support on build plate only. Should be printed with ABS, ASA or any other temperature resistant material.
The parcel box keys accidentally get lost in our mail or where ever else at my office building. I've used less durable solutions and I'm tired of rebuying them when it wears out. It is sized to be smaller than a regular first class…
to be printed on the rifle side without any support.
Toyota auris 2012-2017 estate parcel shelf/tonneay cover (LEFT CLIP) It should be printed horizontally and in ABS, I tried to print vertically in PLA and broke immediately. In ABS it has pass one year and it's still fine.
A ball-shaped stopper to go at the end of the string that holds up a parcel shelf while the car boot is open. It is styled to loosely match the original rubber stoppers of a VW Golf Mk6.
Replacement part for Seat Ateca parcel shelf. Might fit other car models but didn't test that. Print the pins as shown in the picture (more strength). I used a 0.3 [mm] layer height (should only be functional) and PETG and it works like a…
Mazda 3 2008 MPS Parcel Shelf Clip Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Category: Automotive
Includes STLs for both left and right. They screw into the parcel shelf and mine have worked as intended since 2022. Print in PETG preferably to put up with the car getting hot.
A simple pole stopper for the parcel shelf poles of the Smart Cabrio (450). Might work with other models.
Lip of the rear load cover shelf in my Skoda Roomster broke, so I designed and 3D printed a replacement part. More info in my video: Remarks Print it with heat and impact resistant material (I printed it using ASA, PLA won't do in a long…
Pin of the rear load cover shelf in my Skoda Roomster broke, so I designed and 3D printed a replacement part. More info in my video: BoM 1x Fischer Duotec drywall mount 1x shim/washer Remarks Print it with heat and impact resistant…
The Polestar 2 parcel shelf has, in my humble opinion, two design flaws. When you remove the shelf, a string can fall through its hole easily and you can lose it on the ground without realizing it. The string is strongly tied with no…
Printed mine with TPU 95A which is a bit harder than the original part, but still soft enough to absorb most of the vibration.
Clip your Sharpie or Parcelmate to your fridge, or any other magnetic surface. Uses a 10x3mm cylindrical magnet.
I've printed the model using PETG (PLA is not strong enough) on Prusa mini with 0.4mm nozzle, 100% infil. Supports shouldn't be needed. I recommend printing the two parts separately to prevent stringing. Installation: You first insert the…
I didn't want to hang it so I didn't need the hole and removed it. I've also removed the date from the bottom side of the print. This doesn't change anything in the print and post processing process. Transferring older stuff from…
The hook that holds the parcel tray broke and the parcel tray could no longer be raised. So I designed a fast and cheap solution. You only need to print ed place the 2 pieces. For a better fixing you could put some glue . DON'T PRINT IN…
This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…
Designed as accurate as possible for original look. Would suggest to use a high temperature filament like PETG, ABS, ASA and much Perimeters. Rather more Perimeters than infill. 15% Infill is enought.
The hook for the parcel shelf on my BMW x1 broke, so I made a new one. The existing hook is directly attached to the string, so I made this one so that you can cut the string, thread it through the hole at the bottom of this hook and tie…
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
Printed in 0.16 with modifier in slicer to have fuzzy skin on the 4 “towers” that go into the rear parcel shelf 4 walls Print on the flat side to have everything at an angle No supports needed
Replacement part for the parcelshelf of a Ford Ka (2009 - 2016). Best printed in PETG with minimal supports for best result.
Replacement clip for the parcel shelf on a BMW i3. To install: Cut the rope on the broken clip Thread it through the hole in the base of the clip Tie a knot in the rope Slide clip onto the bolt and clip it in place Printed in ASA.
two types of tags (slotted vs hole), to be attached to the x-mas-gifts with the gift ribbon. As their design is parametric they can easily be adapted with FreeCAD (sources are provided) by choosing or even expanding the predefined…
I DESIDED TO MAKE SPARE SHELF HANGER FOR MY NISSAN J11 QASHQAI 2016 WHEN I LOST ORIGINAL PART
