P
PrintablesStucki
Tray for parktool
Tray for parktool bikestand PCS-10, moveble to left or right. You will need 4x M5 nuts to melt in (rutex) and 4x M5 x 30
- Downloads
- 91
- Likes
- 18
- Rating
- 0
Search results: parktool
25 models
P
PrintablesKarolis
ParkTool Grease Gun Filler Refined
Refined Simon's grease filler. Prints a bit better and faster. No supports needed. 2 perimeters is enough. Attaching f3d file if anyone wants to tweak it.
- Downloads
- 53
- Likes
- 9
- Rating
- 0
P
PrintablesDaniele
Dial indicator bracket for Parktool truing stand
A dial indicator bracket to hold a dial gauge and measure a wheel’s lateral tolerance. It is designed to fit a TS-2.2 Truing Stand. Hardware 2x M4x20 2x M4 nut 4x M5x20 4x M5 nut 2x circular aluminum tube r 8mm L 200 mm dial gauge (mine…
- Downloads
- 51
- Likes
- 22
- Rating
- 0
P
PrintablesAdamantium 3D
Allen Key Hanger for Tray for Parktool
After printing the tray by Stucki I realized I wanted somewhere to hang my allen keys vs. setting them inside the tray. This simply clips onto the edge of that tray. Print upside down, no supports needed.
- Downloads
- 50
- Likes
- 14
- Rating
- 5
P
Printablesplasterek3d
Parktool park tool organizer bicycle stand parts tray
Parktool park tool organizer bicycle stand parts tray
- Downloads
- 44
- Likes
- 13
- Rating
- 0
P
Printablesashpool
ParkTool DAG 2.2 Hanger
Tidiness above all! This hanger fits 12mm pegboards. Here's a model https://www.thingiverse.com/thing:3812178 that fits 1-inch pegboards. Category: Tool Holders & Boxes
- Downloads
- 41
- Likes
- 8
- Rating
- 0
P
Printablesv1ncen7
ParkTool bike stand tool Tray
37mm Tube clamp with 10° angle; Uses an M5 bolt and nut; Fits on my 220x220mm printer bed.
- Downloads
- 36
- Likes
- 7
- Rating
- 0
P
Printableschhe
Gridfinity Parktool THH-1 Shadowboard
This gridfinity based (4x7 with a little overhang) toolholder holds the Parktool THH t-handle wrenches from size 2mm to 6mm. The keys lie flat on the shadow board and are easy to reach thanks to the recessed grips. The position is clearly…
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesW4SLZT
ParkTool PCS-9.3 Tray
Shelf for the ParkTool PCS-9.3 bike stand, fits perfectly on the lower tube.
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesStaubi
Ikea Skadis + Parktool Pickers + Wera Belt A2, 1/4
Ikea Skadis + Parktool + Wera Eine kleine Halterung die man an das Ikea Skadis System abringen kann und von unten die Parktool Pickers einschieben kann die mittels Magnet gehalten werden. Das ist aber noch nicht alles, oben drauf kann man…
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
Printables3dprintsfelix
Parktool FFG-2 Pegboard Tool Holder
A mount for your Parktool FFG-2 dropout alignment tool. It has two holes for mounting securely, I am using screws on the pictures.
- Downloads
- 30
- Likes
- 5
- Rating
- 0
P
Printablesmadonius
Parktool PP1.2 Pistonpusher Gridfinity
A gridfinity bin for the Parktool pistonpusher 1.2 (PP1.2)
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesJsR
Parktool repair stand towel holder
Shop towel holder for parktool repair stand. This fits for larger lower leg and tray can be above this. Collar is made by two pieces that slide together, so it is very easy setup. Created spurgears to shaft so that can setup to desired…
- Downloads
- 27
- Likes
- 10
- Rating
- 5
P
Printablessandsturm
Parktool Syringe Holder for HSW
Parktool Syringe Holder for the famous honeycomb storage wall HSW
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesDavid Holecko
Parktool Press Fit BBT-90.3
Parktool Press Fit BBT-90.3 Component 2x M16 nut 200mm M16 threaded rod
- Downloads
- 20
- Likes
- 6
- Rating
- 5
P
PrintablesGrzegorz
Hanger Parktool Wheel Truing
Hanger for Parktool Wheel Truing TS-4.2
- Downloads
- 18
- Likes
- 6
- Rating
- 0
P
PrintablesDavid Holecko
Parktool Press Fit BBT-90.3 - #669
💡 If you like my design, don’t forget to leave a like ❤ It really helps me keep creating more models. Between the tightening screw and the pressing tool, use a large-surface washer that is the same size as the pressing tool. The washer…
- Downloads
- 15
- Likes
- 0
- Rating
- 5
P
Printablesraketqueen
ParkTool SBS-1.2 Socket and Bit Set Compact Rugged Box
I created this design for my ParkTool SBS-1.2 Socket and Bit Set rugged box case. The size is made specifically to be able to print the box in A1 mini or any printer with smaller capacity. The original box the came with the ParkTool…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesAllister
ParkTool BBT-2 Bottom Bracket tool
Gridfinity 1x1x4 solid bin modified to hold the Park Tool BBT-2 Tool.
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesJon Ronat
Parktool Digital Caliper Holder
Parktool created a series of models for printing holders for various tools. These holders are designed to hold the tools on a peg board. The models have been modified to work with the Multiboard system. Used PLA to print. Recommend…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesCeeBee
Parktool sliding adapter for PRS-21/20
This slider is for the old repairstand from parktool PRS-21/22 (dont know if the new one has the same size) to get the possibility to mount bikes with axles. Personally i needed one for 20mm Axles. BOM: Some durable Filament…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesmarapet
Replacement clip for ParkTool CM 5.2/5.3
Lost a metal clip for the Park Tool CM 5.2/5.3 ? Print this part to hold the tool together. I printed it in ASA, any other material that doesn't deform under stress should be fine - not PLA, though you may get away with it if you put them…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
Printables
Parktool Press Fit BBT-90.3
Parktool Press Fit BBT-90.3 Component 2x M16 nut 200mm M16 threaded rod
P
Printables
Gridfinity Parktool THH-1 Shadowboard
This gridfinity based (4x7 with a little overhang) toolholder holds the Parktool THH t-handle wrenches from size 2mm to 6mm. The keys lie flat on the shadow board and are easy to reach thanks to the recessed grips. The position is clearly…
P
Printables
Parktool Digital Caliper Holder
Parktool created a series of models for printing holders for various tools. These holders are designed to hold the tools on a peg board. The models have been modified to work with the Multiboard system. Used PLA to print. Recommend…