Counting matching models…
This is a remix of the great design by DaveRig of his “garbage chute” but we all know it's a poop chute. Changes I made: made bin deeper to fit BambuLab X1C / P1P when sitting on a paver (1.75" higher) Added a kind of ramp inside the bin…
Just added a hole to decrease prinzt time.
My Original Prusa Enclosure had a bit of echo when printing so I wanted to try the concrete patio slab/paver ‘mod’ to quiet things down and it seems to help. I already had a 45x45cm concrete patio slab/paver that I was using before I got…
Scale the z-axis to size to the required height
Brace Details: The braces are designed to support the corners of the concrete paver embedded into a Lack table. The screw holes on the braces are positioned strategically to ensure they thread into the structural areas of the table legs.…
I found Paver Braces on Thingiverse but after printing them out I found out they screw into the hollow part of the leg. So I whipped these up in solidworks. Print with 10 perimeters for strength, paint support enforcers on the 45 degree…
I wanted to silence my printer even more by putting four squash balls under my concrete paver. Therefore I took these ( https://www.prusaprinters.org/de/prints/17995 ) feet and cut the Pin off and added a Rectangle. Print instructions I…
I loved how much the Paver mod reduced the sound in my enclosure, but two things that frustrated me about the pavers in my old setup was how much they raised the printers up, and the overall look the garden stone left me with. So, rather…
I used freecad to create this model and cura to slice it with special-mode (Mold) enabled, the model was placed upside down on the build surface in the slicer and the settings were 1: wall thickness =10 mm, 2: angle = 45, 3: roof = 0.…
Adds 2" of height to ikea lack enclosure for a concrete paver
A scale paver based on the TRIHEX paver https://australianpaving.com/product/trihex/
Update 3 (2/17/19): I found that the PSU clip was just a little too snug, so I added 1.5mm of space between the clip and the bracket. Another update (12/26/18): I've mirrored the lower PSU mount as it needed to be installed inside the leg…
This is a Concrete Paver Cover 16" x 16"
I installed a paver patio and had a couple of downspouts I needed to route across the patio, didn't want to trip over them, but didn't have the slope to reasonably bury the downspouts - so I found "Paver Drain" from Stegmeier which fit in…
This is a spacer made for laying down stepping stones and pavers. Total dimensions are: 12.5mm Length 2mm Width 20mm Height 2nd file is: 24mm Length 5mm Width 20mm Height Print in PETG / ABS or higher quality based on your use-case…
A scale paver based on the aqua version of the TRIHEX paver https://www.midlandbrick.com.au/Products/Pavers/Aqua-Tri-Pave
I decided to add a concrete paver beneath my Prusa which meant that it was too cramped inside my Lack enclosure. I therefore printed these risers which allows the top of the enclosure to be raised. You will need three of the plain risers…
This is to keep your Pavers, Stepping Stones, and other projects in place with 10" spikes to ensure the material does not move in the future!
Cut one side in order to fit 2 of these next to eachother when placing Ikea Lack tables side-by-side.
I purchased a BLV enclosure kit (https://www.printables.com/model/73738-blv-enclosure-beta), but didn't want to leave my PSU and electronics inside, so designed a lasercut base for the enclosure to hold the PSU and electronics. It is…
Needed a tool to help me measure the pavers that I will be cutting along the border of my patio that I'm laying. All you need is a yard stick cut around 18-20 inches to have the same effect that mine has. Instructions -Take the main body,…
For years I've printed on top of paver slabs to help deaden noise and vibration harshness (NVH) caused by the inertia of Prusa printer heads on my MK3. A recent acquisition of a Prusa enclosure and a MK4 led me down a path of how to best…
This mounting system anchors planters or any other objects to heavy pedestal pavers without drilling and without moving the pavers. Use the SCAD file to generate your own bracket and anchor, and optionally the side covers. anchor.stl…
I put a concrete paver under my printer in my lack V2 enclosure and wanted to get it in the same spot every time and keep it from wondering, so I made a simple stop. I print 2 of them and mount them in the back.
I simply chopped off the rail portion in TinkerCAD. I then modify each one's base height to perfectly level my paver on a crooked desk.
It's my first F360 model, go easy on me please :) .f3d file is included, feel free to modify to your needs.
Grass block paver mold now it is printable on my ender3. Now you can print a dozen of them and do a bag at a time. Also made the top wider than the bottom so it can be released sooner when the concrete is still green. thought about making…
We recently had pavers installed in the back patio, but they covered the storm shutter bolts. The paver installers drilled holes in the pavers so that I can still access the bolts, but now sand, dirt, and bugs collect in those holes. I…
