Search results: pch

Klíčenky Riot, Snapchat, Toyota, Chanel

Malé klíčenky

Snapchat Keychain

4mm base and 0.8 color change (0.2 layers = 4 layers) Cut Down if need be 38mm x 30mm 6mm Keyring hole

Snapchat Pixy Rugged Box / Travel Case

The Pixy's maker, Snapchat, may have quickly abandoned the drone market but that doesn't mean we have to abandon our little drone buddies! The Pixy's surprisingly well built but for long trips or throwing into a bag full of other gear its…

ClipCharge (9mm) - RemixForge Edition

ClipCharge – RemixForge Edition Load Fast. Clip On. Move Out. ClipCharge turns a trusted 9mm speed loader design into a battle-ready EDC essential. This RemixForge edition adds a rear-mounted hook for keyrings, carabiners, or MOLLE loops,…

Snapchat Pixy Drone Blade Guard Replacement Part

Simple replacement part for the blade guards on the Snapchat Pixy drone . Printing Suggestions My tests and final prints were done with a stock Prusa MINI+ in Prusament PETG with the stock 0.4mm nozzle. Better results came from lowering…

Snapchat keychain

Snapchat keychain

Revised Protoxtruder 2.0 ebb36 mount for tapchanger

GCode is for a CoreOne with 0.4 HF nozzle and ABS print material. Height modifier set to help print the ziptie pieces

Tapchanger Dragon Burner Dock Mount - Brass Inserts

I widened the gap on the dockmount becuase I find the hammerhead nuts frustrating to use compared to roll-in T nut. Print at same orientation as original model (on side), add supports. There's a version with and without the spot for the…

Small Temptowers+wait for Tempchange with retraction

Like me, if you dont have time, or just not enough filament, just use the smaller Temptowers. Based on the "All in One Temperature & Bridging Tower - PLA & PETG GCode included" from Tronnic, and the remix “Prusa Mini Temptower for PLA,…

The ScoopChute Funnel Scoop by Blated - 100% Print in Place! - UPDATED SEPT 2026

UPDATE: Model has just been updated to our latest design. It's improved and should work very well at .2 layer height with PLA such as Sunlu PLA+. Note: Some mechanisms were designed for .2 layer height so if you're using adaptive layer…

BambuLab Poopchute

The BambuLab x1 likes to get rid of its leftovers out of a hole in the back In order to get rid of the filament remnants, I modeled this little chute. It can be well positioned and emptied even with a very small distance from the wall.…

LDO Nitehawk Umbilical Clips for Stealthchanger, Tapchanger, etc

I designed and use these for my Nitehawk-SB based Stealthchanger build. Print from ABS/ASA or other high temp/strength materials. Uses two 2mm wide zipties for indirect tensioning. Allows for two 1mm lengths of piano wire to run through…

Finger hole drawer for Centauri Carbon Poopchute

I loved the original design but I didn't care for the handle and felt like it was a little excessive and unnecessary (at least for my setup). So I reworked the drawer to have a simple finger hole that seems to work perfectly fine and…

Centauri Carbon internal Poopchute

If you are like me and dont have space in the back to either collect the purge in a bucket or make it reach around to the side or bottom to collect it there then this might be for you. Add capability to purge into a internal bucket that…

Creality K2 Poopchute

Hallo hier könnt ihr einen Poopchute Drucken , der fest mit den Drucker verschraubt wird. Es werden nur vorhandene Verschraubungen benutzt (kein Bohren oder Umbauen). oben wird die orginale Schraube weiter benutzt und unten benötigt ihr…

Anycubic S1 Ultimate Poopchute Bucket

Make sure to follow the notes with the STL so you don't easily break the model when detaching from bracket S1 Poopchute XXL Basket: Print with 3 walls, 5 top/bottom with 15% infill (Print this if you want to save filament and doesn't mind…

Häppchen-Sticker Geburtstag 80 Jahre

Deko-Sticker für Kuchen und Häppchen für 80-jährigen Geburtstag

Bambulab P1S Poopchute / Mülleimer

Printed with 0.2mm profile. 10% infill. Must be attached with screw.

Flipchart Door Holder

Print two times with 0.2 Layer height. No Support needed when printed the way intended.

Qidi Q2 Poopchute + Box

ICh wollte einen seitlichen Auswurf für die kleinen Reste. Leider gab es noch nix auf dem STL-Markt.. Hier mein Entwurf. Ich habe mich aber entschlossen die Schrauben nicht zu benutzen bzw durch längere zu ersetzen. Ich habe den Poopchute…

PS Vita PCH-2xxx stand low profile

Just a simple low profile stand for my PS Vita (the newish model PCH-2xxx) A little bit snug as the stand lifts up with the Vita, but what I do is pick it up while pushing it off from the back base tab, all with one hand. Does the job for…

Centauri Carbon internal poopchute (without heatset inserts)

Buckets are available with the original This goes for every printed/plastic thread, do not overtighten it, even tho these ones are a bit more resiliant. Same print settings as the original: support generation needed for the area where the…

Snapchat Logo

Snapchat logo in 3D. 5mm high.

K2 Poopchute bucket

I made a small bucket for catching the poops that come rolling out of LF_designs poopchute. He designed a nice chute but has nu tray. So i tinkered my own. It fits under the chute and goes a little around the corner behind the machine.…

MakerChip for Single Extruder printers - FlipChip

If you do not yet have a multi-color printer, you can still make a colorful MakerChip . Print this model in two different colors and then snap it together. Use the Slicer to add text via color swap for customization.

Cartographer mount for Dragon Burner Tapchanger

I'm using a different hotend and there wasn't too much room to mount the Cartographer in the same way @Scotts3D did. I redisigned it to have: A new mount for MCU board. At the side or the Orbiter motor Reinforced coild board mount. As I…

Snapchat Icon

Snapchat icon in 3D. 5mm high.

Klipch Bookshelf Speaker Stand

Lift your speakers off the desk on either side of your monitor.

Snapchat logo cookie cutter

Snapchat logo cookie cutter

Voron Tapchanger Endstop XY

XY endstops for Voron Tapchanger. Y endstop is adjustable X endstop is fixed but you can adjust it if needed by printing another lever. If the endstop is not activated you can print +1 // +5. This lever is 0.1 // 0.5 longer which means it…

Ancient Kipchak Warrior - 3D Printable Historical Bust

English: Bring the spirit of the Eurasian steppes to your collection with this high-detail 3D printable bust of a Kipchak (Cuman) warrior . This model features the legendary masked helmet , a signature piece of armor used by Kipchak…

Schraube für Flipchart

Ersatz für Schraube für ein Flipchart mit Teleskopbeinen

ClipCharge (5.56) - RemixForge Edition

ClipCharge – RemixForge Edition Load Fast. Clip On. Move Out. ClipCharge turns a trusted 5.56 speed loader design into a battle-ready EDC essential. This RemixForge edition adds a rear-mounted hook for keyrings, carabiners, or MOLLE…

Flashforge AD5X Purge Port (Poopchute) Trashcan and Stand

I have seen quite a few intricate designs with guides and rails that run to the side etc. But I have a specific tent enclosure that has limited space and is designed to stay closed to keep dust out and heat in. So, I designed this to fit…

Dragonburner Tapchanger decorative cowling

alternative cowling/backplate for tapchanger. thick color honeycomb to avoid bleed, (slightly transparent abs for example) thin black backer to avoid LED shining through abs https://github.com/viesturz/tapchanger

PS Vita Slim display stand (PCH-2016)

Was worried the other stands available could scratch the display or the case of the PS Vita, so I made one that's definitely without the risk of scratching the console. The stand hooks uses the little notches on the bottom side of the…

Tupperware Eidgenossen (alt) Kläppchen

Ich habe den Deckel in PETG gedruckt - mit Support.

Eliud Kipchoge Marathon Legend Key Holder

Keep your keys organized and celebrate a running legend with this Eliud Kipchoge-inspired key holder. This 3D-printed design features Kipchoge's silhouette in his iconic running pose. Perfect for runners, sports fans, or anyone who needs…

Snapchat keychain

DHVGS! Gent student (university) key ring for the real enthusiasts! Use ''Ironing on all top surfaces'' for a better finish so that you see fewer lines. If you have printed it send a picture in the makes section of the page. JOE! Print…

SV08 TapChanger 2020 extrusion bracket (See Newer Model)

See OTHER bracket for download Update: 2 files have been merged into 1 as of 5-21-24 SV08 2020 Top Rail Adapter Bracket (ToolChanger) https://www.printables.com/model/887692-sv08-2020-top-rail-adapter-bracket-toolchanger T his is built…

sexy Rotkäppchen

Flipchart Paperhanger (but stronger)

Printed in PETG works well! I made the pillar with 100% infill! I have''t noticed a use case for the square between the "disks" (like in FlipchartPaperHanger.3mf) so I recommend the stronger version.

Snapchat drinks coaster

I have a whole collection of app coasters if you want to check them out. Each colour is on a different layer so you can pause and replace the filament at each colour change when 3D printing. Enjoy :) Category: Kitchen & Dining

Magnetic Miele Washing Machine Door Opener replace Remix. Original by McPcholkin at thingiverse

Dies ist ein Remix von McPcholkin. Die ganze Anerkennung geht bitte an Ihn. Vielen Dank dafür. Es werden zwei runde Neodym Magnete: 8mm x 8mm x 1mm benötigt. Original: https://www.thingiverse.com/thing:3652881 Ich habe die 3mf Datei vom…

Flipchart paper hook (60mm hole spacing) for tape mounting

Basic set of hooks for flipchart paper. Intended to be either glued or double-taped to wall/fridge/whatever. Fits holes with 60mm spacing. Stubs have 20mm diameter and small retention tabs. Fits up to 10mm thick blocks of paper. Category:…

Tapchanger Shuttle - rods (modification)

the STL orientation of the shuttle-rods was not good to print the belt grip, so I separated it

GripCheck – Tire Tread Depth Keychain Gauge

Two Versions · 1.6 / 3 / 4 mm · Easy to Print 🛠 Overview GripCheck is a compact, functional tire‑tread depth gauge designed as a keychain. It allows you to quickly check the three most important tread thresholds: 1.6 mm → legal minimum…

Foot/Endcap for Flipchart Wilkhahn 442/1

after the 3rd of the footcaps of this Wilkhahn Flipchart Model 442/1 fell out we decided against glueing it back but make a set of new ones, with strong fit. Works in PLA. Recommended to print “sole up” and activated ironing for a smooth…

Fachtrenner für Satch Federmäppchen / Divider for Satch pencil cases

Trennt das große Fach in zwei kleinere. Muss mit sanfter Gewalt eingebracht werden. Support wird für den unteren Rand benötigt. Separates the large compartment into two smaller ones. Must be inserted with gentle force. Support is required…

Flipchart hook

Replacement for original paper hook for flipcharts. I recomend PETG and 3 layers.

Markierpfeil für Flipcharts

Gut sichtbarer Pfeil zum markieren An Postern, Flipcharts etc.

Bambulab poopchute cover v4.1

Simple magnetically attached poopchute cover/poop guider 'Actual' photos ComingSoon™ Features: No supports Weird looks Needs two 6x3mm magnets and glue Designed in Tinkercad by an idiot Bambulab logo (why not?) Open top (to remove clogs…

FlipChartHook

Paper holder for Flip Charts with 16mm thickness

Chaoslabs CNC Optotap to Tapchanger mounting interface

Allows the use of a ChaosLabs CNC Optotap bed level sensor with the voron tapchanger system to enable gcode based automatic nozzle height detection without having to add a bed sensor to each toolhead. I use RRF on duet3d boards and…

Nachttischlämpchen

Sehr spontanes Projekt. Von Konstruktion bis Montage rund 18 Stunden. Diese Version ist bestenfalls alpha/beta. Beinchen hatten einen zu kleinen Durchmesser. Lampenschirm ist zu dünn. Beine sind aus PET-G, Lampenschirm aus PVB und im…

filpchart hacken (mit anderem aufhänger)

Das teil wo du das papier aufhängst bricht immer ab. deshalb muss da was anderes hin

Tapchanger-Stealhburner Cartographer mount

Ich habe die Stealthburner Aufnahme vom Tapchanger mit dem Cartographer erweitert. Um diese zu nutzen empfehle ich eine slim Version, damit beim ab oder andocken der Cartographer nicht getroffen wird, oder ihr den Druckkopf aus dem Dock…

TapChanger-Laser

Put a laser on your TapChanger. Screw spacing: 20mm x 40mm. Modeled for square rods and single magnet from commit 0022aa0a. Back side mounts spaced for EBB36/SHT36 and [OptoTap](https://github.com/VoronDesign/Voron-Tap/tree/main/OptoTap).…

William Ranstead snapchat bitmoji

3d model of a Snapchat bitmoji, no supports required

PoopChute HT-50 pipeadapter

Ich habe einen Adapter für den PoopChute entworfen, um ihn an ein HT50-Rohr anzupassen. Ich möchte den PoopChute hinter dem Drucker loswerden, der regelmäßig geleert werden muss. Es ist nur der Adapter, den Sie benötigen, um HT-50-Rohre…

Pendant with KPCHP motif

Pendant with KPCHP motif Category: Keychains

TapChanger Shuttle for Cartesian

Use TapChanger with your cartesian printer.

Control Panel for ProTemp PT-18-PCH-A Propane Heater

The igniter on my propane heater pushed through the panel the other day, so I did what any 3d printer owner does, whipped up a replacement panel in CAD and printed my own. This is specifically designed to fit the ProTemp propane heater,…

Poopchute v2 – Improved Funnel and Mounting System

This is an updated add-on for my K2 Plus Ventilation System, which you can find here: The new Poopchute v2 features a redesigned funnel with a larger opening to reduce the risk of clogging, along with a completely new mounting system for…

Flipchart Marker Spaceship

Fun little addition to your Neuland No. One Flipchart markers. Goes on top of the marker's cap. Body and tip are separete parts so they can be printed in different colours. Fins are to be glued in for easy printing without supports.

Snapchat Logo Keychains (Raised & Cutout Versions)

This project includes two 3D printable Snapchat logo keychains — one with a raised logo and another with a cutout design. Both are compact, lightweight, and perfect as small accessories for your keys, bags, or as gifts for Snapchat fans.…

Bambulab p1p poopchute

Poopchute for bambu p1p that uses 3 6mmx3mm magnets to attach to the printer

flipchart paper hook

holder/hook for flipchartpaper

inlay for DJI Osmo 360 fits perfect in Turkana Magpie/ Chipcheek

made A in lay to fit inside a Turkana Magpie. It holds my Osmo360, DJI remote Cables and 2 spare batteries Printed in PETG

hall sensor endstop (tapchanger lite)

The combination of the hall sensor endstop file with the shuttle-rods doesn't fit, so I made a cut to make it fit together

Snapchat keychain

This design leverages the widely recognized ghost icon associated with a popular social media platform. Its simple and i

Flipchart Replacement Leg Clamp

This is a replacement clamp for the extending centre leg of a flipchart. Outer tube is 25mm, inner is 22mm. Extra parts needed: 1x M5x30 hex bolt 1x M5 nut

OhSnap! SnapCharge 2.0 mount

OhSnap! SnapCharge 2.0 mount for adjustable arm.

poopchute

collects print poop

Rossinante - Tapchanger shuttle with cpap

The whole contraption is really messy and the is sketch rather dirty, parts have many artefacts, it could use a lot of refinement but i'm not willing to give it right now. It's not blowing straight and might be slightly rotated. The…

Wall Mounted Flipchart Peg with Pen Holder

3D printing settings Prints well in PETG with 0.2mm layer height and 0.4mm nozzle. Place some support in the pen holder area. Other materials and setttings are also likely to be successful. Please let me know if it needs any tweaks to…

Snapchat

Snapchat dekorace

CampChef Sidekick Burner Replacement knob

This is a replacement burner knob for the CampChef Sidekick propane burner. I had tried other knobs available but each kept breaking after a short time. This is designed to be printed in ABS or ASA with 40% infill (minimum). I typically…

WhipCharge Rack N2O Charger Holder

N2O Cream Charger Magazine – 50 Capsule Storage Rack Keep your N2O cream charger cartridges neatly organized and ready for use with this practical 3D-printable Cream Charger Magazine. This storage rack is designed to hold individual N2O…

Asus ROG Strix Z690-A Gaming WIFI D4 PCH chipset cooling mod

The Intel Z690 chipset is notorious for running hot, yet ASUS chose a silent, passive heatsink solution rather than active cooling for the gaming market. For long-term reliability, actively cooling the chipset can help extend its…

CampChef Gridiron Hook Cover

I created some covers for these magnetic hooks ( https://www.amazon.com/dp/B0C4HGSH4C ) that fit the recessed parts of my CampChef Gridiron36 side shelf.

Flipchart Paper Hook

I lost one of the two holders, so I constructed and printed it myself. Turned out pretty well.

Rossinante - Tap shuttle mount for tapchanger

The whole contraption is really messy and the is sketch rather dirty, parts have many artefacts, it could use a lot of refinement but i'm not willing to give it right now. It's not blowing straight and might be slightly rotated. The…

Poopchute v2 – Improved Funnel and Mounting System

This is an updated add-on for my K2 Plus Ventilation System, which you can find here: The new Poopchute v2 features a redesigned funnel with a larger opening to reduce the risk of clogging, along with a completely new mounting system for…

Revised Protoxtruder 2.0 ebb36 mount for tapchanger

GCode is for a CoreOne with 0.4 HF nozzle and ABS print material. Height modifier set to help print the ziptie pieces

Tapchanger Dragon Burner Dock Mount - Brass Inserts

I widened the gap on the dockmount becuase I find the hammerhead nuts frustrating to use compared to roll-in T nut. Print at same orientation as original model (on side), add supports. There's a version with and without the spot for the…

Flipchart hook

Replacement for original paper hook for flipcharts. I recomend PETG and 3 layers.

Ancient Kipchak Warrior - 3D Printable Historical Bust

English: Bring the spirit of the Eurasian steppes to your collection with this high-detail 3D printable bust of a Kipchak (Cuman) warrior . This model features the legendary masked helmet , a signature piece of armor used by Kipchak…

sexy Rotkäppchen

sexy Rotkäppchen

iPhone Snapcharge 2.0 and Apple Watch Charging Stand

A remix of dankmaker's iPhone MagSafe and Apple Watch Charger Stand adapted it to work with Ohsnap's Snapcharge 2.0. I've included a 3MF and an STL. You will need to reduce the scale of the stand to 10%. For some reason, when I imported…

HueForge- Rot Käpchen

5.Colors - 240x120 alle Infos im TXT-Datei !!!-lesen-!!!