Counting matching models…
This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…
Credit where its due I find the UltiMulti version of MMU3 to be a welcome upgrade on the MMU2/MMU3 basic design by prusa. Its a credit to @David_84304 huge amount of effort to design this, and I am thankful he made it available.…
I have a mess of switches and computer stuff. I saw people with 10-inch racks online and wanted to make one. After getting everything together, I could not for the life of me find a 10-inch PSU or power strip that worked for me, so I…
3D Printed 10" Network Rack Mount for Netgear GS305PP and PDU Power Switch As part of my classroom network setup project, I’m building 10" 3D-printed racks for my students. They'll be configuring and testing real-world networks, gaining…
This is a lettering stencil made to revive J.A. David's "Plaque Découpée Universelle" (PDU) designed in 1876. It is more of a design exploration tool, but it can be used to make moderately large letters for signs, or to invent new…
I don't recommend rebuilding it if you don't know how. It's life-threatening! It could catch fire! I accept no responsibility for damages or injuries! Print as separate bodies! 4x M3x8 Cylinder Screws 5x Switch (4Pin Black) 1x C13 with…
Was having trouble finding a small, inexpensive PDU for my 10" minilab rack mount server with a bunch of USB ports (to avoid filling the rack with adapters). Then had a little epiphany about in-desk power supplies! Found this little…
Printed in PETG on my MK4 to accomodate the PDU clearance issues. PETG 0.4mm nozzle on Prusa MK4 0.30mm layer height 5% gyroid Infill 3 Perimeters 5 top layers 4 bottom layers Print time ~1 hour
I designed and printed a pair of these consoles to support a PDU for my daughter's desktop instruments. Used the catenary function to form the curve. This makes it strong enough to bear more weight. Some circular/elliptic holes were added…
I got a used BayTech RPC-3A Power-Distribution-Unit (PDU), however it was missing the mounting brackets (also call rack ears) to mount the PDU to a 19" server rack. I created these in fusion 360 and it may be a good template to easily…
Even though the Kopp Powerversal power distribution are completely made of plastic (don't get fooled by the aluminum look), they are made extremely well from the electrical standpoint. Additionally, the power sockets have the right angle.…
OnStep Shiled for ESPDUINO-32 [WeMos (D1 or D2) R32] telescope goto controller on basen Howard Dutton project My wiring diagram and PCB on EasyEDA Pinmaps for my PCB is included (replace in OnStep\src\pinmaps\Pins.MaxESP3.h) This Shiled…
10" Mini Rackmount for a recessed style PDU. Takes 1.5U. Amazon: https://www.amazon.com/dp/B0CC99XYX3
Print two of the mounting pieces and four of the inserts in the attached orientation.
Made specifically for Tecmojo 1U Rack Mount 19 Outlet PDU Power Distribution Unit Power Strip Circuit Breaker (SKU# 13111901) but may fit others. Fits snug enough where you might not need adhesive, but still recommended (I used double…
Wall mounts for Parkside PDUW 280 A1 Multi-purpose Air Tool set and the accessories, that come with the product (spade, scraper, different chisel types). Print two of the multi purpose hooks to mount the air tool itself. For each…
This adapter/mount allows for you to mount a vertical PDU with "button mount" style mounting hardware to virtually any rack. I personally used these with my 42U SYSRACK and Eaton Rack PDU G4
Designed to work with Rittal PDU accessory pack DK 7979.001 . Allows for mounting 3rd party PDUs in Rittal VX racks using this 3D printed button washer and M5 button head screws. Printed using PLA @ 0.2mm layer height, 3 walls, 50%…
Print two copies of the model (one for each side) and attach to the PDU with the included brackets and 4-8 M3 machine screws (I used M3x6mm). NOTE you may need quite a bit of space to angle this & fit it into your rack, so make it one of…
Warning: mains wiring requires following local legislation and having the appropriate skills or qualifications Short summary A printable 1U power distribution unit for a 10-inch mini rack, combining four USB-C PD ports that can deliver up…
Basic holder to secure a PDU to the wall. I purchased this model from Aliexpress and realised later on there was only a bracket on one side. This model provides support for the other side.
These are printables models for the PDU cover on super micro 24-bay server units. PN sc846 and the variance of the 4U capacity. The slats are angled to eliminate the need for supports. Fit is pretty decent, but not perfect. There are 2…
I wanted to have some affordable daisychainable true1 PDUs so I designed two new ends fitting a reasonably priced logilink PDU9C02 and Rean true1 sockets/outlets. Print one of each PDU in and PDU out Best printed in PETG Place on the…
Vymodelováno ve FreeCADu. 4 vruty 2x10
With the model, two HP DPS (Or other similar Delta electronics) Server power supplies can be connected to each other, thus ensuring a redundant power supply. I needed the whole thing for my DIY laboratory power supply. (>1000W) PDU…
With this mountingbracket you can fit a Rittal PDU 7955.310 into an Minkels 19 inch cabinet. Just use the metal brackets from the blue fiberstorage. Place the 3d printed part with some M4 screws and you are ready to go.
1U 10-inch Multifunction Rack Shelf This is a custom 1U utility shelf designed for 10-inch homelab racks. It consolidates power distribution, UPS backup, and cooling management into a single unit, eliminating cable clutter and "power…
The original PDU has three “filler” caps, one with a power LED, those are not used afterwards. Printed in (Sunlu) PETG, not PLA for heat reasons. PDU i used: LogiLink Professional PDU9C03 https://www.amazon.de/dp/B078YRWSFC The power…
1u PDU (power distribution unit) wall mount Needed to mount a 1u rack mount PDU to the wall by itself. This part was designed for these drywall screws. This part was designed for these 5mm SS melt-in inserts. This part was designed for…
I printed this in ABS but PLA or whatever should work and used M5 screws to bolt it to my driving simulator. Two screws are probably plenty. It's a tight fit and holds it well enough in place without anything else.
I made this for my PDU to hold the power supply and CD reader/CD's and board. This is what I used in this: Power supply Meanwell RD-50A (5VDC/12VDC)…
This is a wall mount for the BachMann 19" Alu 1U Powerstrip/PDU. (art: 333.001). Originally it is a 1U 19" Rack mountable power strip. But I need to mount this to my wall instead and the old 19"-bracket holders are long gone. Printed with…
Was having trouble finding a small, inexpensive PDU for my 10" minilab rack mount server with a bunch of USB ports (to avoid filling the rack with adapters). Then had a little epiphany about in-desk power supplies! Found this little…
Admittedly, Shrike Lab gave me a lot of inspiration to do this myself. My design does not have the safeguards or custom PCB that they designed. However I believe that it will still be safe to use. Their design also used the entire power…
1U 10-inch Multifunction Rack Shelf This is a custom 1U utility shelf designed for 10-inch homelab racks. It consolidates power distribution, UPS backup, and cooling management into a single unit, eliminating cable clutter and "power…
A 6-inch rack mount version of a Power Distribution Unit (PDU) using the Anker Nano Charging Station 6-in-1 USB C Power Strip. Purchasable from Amazon for around $40: https://a.co/d/18bemgk Includes: 2 front USB-C 2 front USB-A 2 top/rear…
This unit is designed to fit within 1U rackspace and be printable on a 256x256 bed. I'm not including the rack arms so either it goes on a shelf or you design them yourself. BOM: 1x 12V 15A Power Supply: Chosen because of dimensions and…
Admittedly, Shrike Lab gave me a lot of inspiration to do this myself. My design does not have the safeguards or custom PCB that they designed. However I believe that it will still be safe to use. Their design also used the entire power…
Remix of torth3’s 10-Inch Rackmount PDU power socket cover. The original model’s opening dimensions match the referenced Amazon power input module exactly, but my PETG print on a Bambu P1S did not allow the part to fit cleanly. This…
I modified the original model to take a 3010 fan to blow air across the USB-C controllers, and put a spot for a DC controller if you have a fan that supports it, and cutout for the power supply fan rather than a recirculating situation.…
I designed this because the company that makes this bracket doesn't sell the metal brackets, Apart.
![OnStep Shield for ESPDUINO-32 [WeMos (D1 or D2) R32]](https://media.printables.com/media/prints/164921/images/1532140_65159d71-3ca4-4c50-a771-1359b48c9b19/large_display_6p4_164921.jpg)
