Counting matching models…
Simple phone holder that drapes over the front handlebar on a Peloton bike. I also made a version that holds iPads/tablets at a slightly shallower angle: https://www.printables.com/model/611611-peloton-ipad-holder
Peloton shoe hanger that fits onto the weight rack of the bike. Print two to hold two pairs of shoes. Because some people have asked, this model is not meant to snap onto the metal frame of the weight holder, but rather sit slightly into…
This is more of a full redesign rather than a remix, but I wanted to give proper credit to DougPrints for their design. Changes from original design: Smaller diameter bracket to accommodate standard Peloton handlebar (33 mm) No need for…
This is a bracket and hooks to hang two pairs of shoes off the back of a Peloton exercise bike (model: Bike, not sure if it will fit the Bike+) Full supports helpful for printing. There are three parts: one is a frame that attaches to the…
This is a lightweight but stiff tablet stand for the Peloton bike. Can be mounted on the v1 bars, v2 bars, or over the screen. Wave pattern adds a nice look while reducing filament usage. Requires support for one structure on the back.…
Large bottle holder for the peloton bike. Made for bottles with a diameter up to 96mm. The attachment point to the bicycle is not the most solid part of the bike (plastic). Therefore don't use heavy bottles and no guarantee if the…
Installs on center bar of peloton bike, see pics. No screws needed, after pushing onto the center bar, it clamps in place using a tapered wedge hidden inside the part called "lock" Holds various phone sizes with a clicky slider that grabs…
Tray to hold your phone or other stuff on the Bike+. Has 2 orientation options and uses insets to hold it in place I used these insets on the design, because I wanted to experiment with making it moveable. https://amzn.to/3w1SqeJ
The rest was designed to be a single print. No other parts are necessary. I have been using mine (Prusament PLA) on my Peloton for most of a year now.
Wife wanted a towel hook for the Peloton bike, and I wanted to print something that didn't require any additional modifications to the print. Hence, this clip-on hook sized for the Peloton handlebars. If you want the hook to maintain a…
Remixed with more rounded corners and no hex pattern. Should be much faster to print. Re-used same angled bar connectors and overall depth, width, and stop height. More fillets and blending. Printed in Prusament Galaxy Black PLA .
(updated Jan 2023) sized Z-thickness down to 10mm, added nail hanger hole into object (by subtracting “Keyhole Hanger - Negative Volume” ( https://www.printables.com/model/314932-keyhole-hanger-negative-volume )). My intent is to use the…
My FIL complained to me that his peloton had wimpy little holders for itty bitty water bottles, which obviously wasn't suitable for his big chungus water bottle for his 12 hour bike rides. So I modeled this up so he can stay hydrated…
This shelf uses the screw that is already in place on the bike. The shelf fits my iPhone XR with a case on it with room to spare and should fit most phones.
Do you own a Peloton Bike or Treadmill and also own the Peloton weights? I finally managed to come up with a really slick storage solution for my Peloton weights and thought I would share. Issue is, the Peloton weights have a unique…
Designed to be more narrow than the original model. This fits newer Pelotons that have more narrow handlebars. Uses the frame of the handlebars for support. I have been riding with mine for more than a year (Prusament PLA) and it works…
Introduction You can print these pedals and attach them on to your Peloton so that it can be used with or without specialized cycling shoes. Printing Instructions I printed these in PLA with a 0.4mm layer height, 3 walls, 25% infill. I…
Securely mount your iPad Air above your Peloton Bike (original non-swivel) monitor. Mounts to top vesa bolts of the monitor. Requires (x2) M4 16mm socket head (x2) Silicone bumpers 10x3mm ( amazon link ) Note: Installation requires the…
May not fit smaller printers. Print Settings: 0.28mm layer height 10% infill supports on raft/skirt off
Needed the disk calibration tool and Peloton doesnt seem to sell them. Only other one I could find required supports. This one does not. I thought it'd be fun to do a multi-color variant of the bottom disk to make it easier to see the…
Wanted a Nalgene holder for my Peloton, but all existing models I could find were for the Bike, not Bike+, so I remixed a holder design for Bike to adapt for the Bike+. The design slips over the upright tube frame and is pressure fit,…
This is a bracket to hold a Bose SoundLink Flex Bluetooth speaker on a Peloton bike. I wanted to have an easy method that holds the speaker securely while on the bike, while also being able to take the speaker with me. The rubberized…
I made myself a clip-on stand for any device on the peloton-Bike, so you can work-from-home while working out :)
Update: I've added a new alternate tray. The alternate tray has a solid bottom, sports the Peloton logo in the center, and features ribs on the inside. These ribs allow a phone to be leaned against the Bike+ screen. This is useful when…
A mag safe wireless charger mount for Peloton Bike+. Only verified compatible with the Qi charger listed in the BOM (annoyingly they are all different sizes, but the one in the BOM is about $15USD, and seems to work well). I tried at…
Some reports of Peloton knobs splitting. Peloton resistance knobs appear to be melted/molded onto the rod at manufacturing. This is a non-replicable part according to Peloton. Print instructions Summary This is an original model from 2nd…
Remixed Chris ' Peloton Shoe Hanger to make it about 2.5" longer. The original was contacting the weight holders because I keep my seat towards the back limit of travel. This one clears the weight holders with the seat nearly against the…
I use a Peloton bike multiple times a day and hated it doesn't have a spot to hold your phone so I fired up Fusion 360 and designed a simple holder for my Pixel 8 Pro. The clip just attaches to the handlebars and all you need is a 3mm x…
Model of the Peloton. Both a single-piece and multiple-piece (for assembly) files provided. Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.12 but 0.06 on smaller parts…
Remix to add a firetv remote holder. Remote specifically fits the 4k firestick remote with sound controls.
I use a Peloton bike multiple times a day and hated it doesn't have a spot to hold your phone so I fired up Fusion 360 and designed a simple holder for my Pixel 6 Pro. The clip just attaches to the handlebars and all you need is a 3mm x…
This is a towel hook made for the Peloton Bike+, an indoor exercise bike. The model hangs on the frame between the handlebars and the screen, leaving a convenient location to store a towel. This way, the towel is always available when you…
If you own a Peloton bike and you would like to use a virtual biking app like Zwift or MyWhoosh, then you might want to use a tablet with it. This holder is simple to print and has enough stability to prevent the tablet from falling. I…
good model that i found from appelm. follow him. rn. use %70 infill
I had an aftermarket phone tray for my Peloton but couldn't lay my phone face up on the surface without the popsocket making it scoot around. Made this the perfect width so I can drop it in and it stays put. Could also just be used on any…
With filament changes at 4.2 and 5.2 you can have a really nice looking chart. I recommend starting with black, changing to white, then finally red. It fits on the echelon bike and is handy when converting resistances.
I got tired of the weak built in speakers on my Peloton bike and don't always feel like using ear buds so I decided to create a mount for a UEBoom I had sitting around. The mount snaps together without any screws and holds the speaker to…
Peanas de movimiento para miniaturas de 25mm de base para bolt action, para los pelotones. Cada peana alberga 5 figuras (la mitad de un pelotón completo) para facilitar el movimiento en el tapete. el texto esta tanto en castellano como en…
My Peloton Bike+ touchscreen is having issues, so I designed this small mousepad that attaches with zip ties. It works perfectly and is very secure. Printed on a Prusa Mini with only buildplate supports.
Wall mount holder to house Roku and Peloton Guide remote. Remix of JLG510's model.
If I don't eat anything I tend to bonk after 70mins. This basket makes it convenient to store some nutrition so that I don't have to get off of the bike to refuel. I like this better than a banana since its less messy. Look out Wilpers…
My training on the Peloton requires many long hours in the saddle and adequate fuel. I needed a place to keep my Rice Krispies treats (excellent carb source during long rides) that wouldn't interfere with hydration or entertainment. Since…
If you own a Peloton bike and you would like to use a virtual biking app like Zwift or MyWhoosh, then you might want to use a tablet with it. This holder is simple to print and has enough stability to prevent the tablet from falling. I…
I wanted to get my power adapter for the Peloton Bike+ off the floor to reduce tripping hazards. I used this mound and some 3M command strips to attach it to a nearby column.
So you can put your phone higher up. You can print it on it's side with no support. I cut out some holes to reduce material use.
Replace Peloton spin bike's [1] default speakers with OontZ Angle 3 ULTRA (Cambridge SoundWorks) [2] by mounting it right under the screen and connecting directly by stereo cable to eliminate bluetooth delays. Better, louder sound with…
I couldn't find any phone holder I liked for the Peloton Bike+. I printed other models and wasn't thrilled. Too loose, nothing keeping the phone from getting knocked off the sides, Wasn't securely mounted, got in the way when rotating the…
Print two arms which then hang from the top of the screen. Not sure if it would fit the Tread+, that has a different screen so it may not. Arms are not rigidly connected but I found with the weight of iPad/phone holding them they don't…
AC Infinity sells a nice pair of 120mm PC fans that can be USB powered from the back of the Bike+ screen. This model makes it trivial to attach both fans to the top of the screen, facing the rider. Slots together. If you position them…
This replaces the angled tray that fits on the left side on a Peloton bike.
The is a Dyson fan remote holder for clipping to the Peloton's center screen bar. Only tested with the standard fan remote. Not sure if there is a difference with other model of fan remotes. Print Settings Printer Brand: Prusa Printer: i3…
It's really simple, just a hanger for your bike shoes. Print with internal supports.
Admittedly, since this is one of my first times using any kind of CAD software, I think this could be improved. One main issue is that because of the added ball joint, the tray would require tons of support when printed in any…
Print upright with supports. Add modifier blocks in your slicer to increase perimeters to (5) around bolt mount areas. Supports everywhere. GCODE file prints in PETG with these extra perimeters around these bolt areas and organic…
Not pretty but it works well and allows me to use PS5 remote play while riding the Peloton. Also good for watching movies and Youtube (basically anything on an iPad). Tested it on the most recent iPad air, iPad without a case, and three…
This small out of the way phone shelf attaches directly to the Peloton using the existing screw on the left side of the handle bar neck. Just unscrew, place the bracket on the neck, and put the screw back. Hardware required: (2) 3mm hex…
The square dumbbells didn't really fit on the bike+ and were very close to just falling off. I made a couple clips that would better hold the new dumbbells. Print with supports
Wife got a Peloton bike used and it did not come with the wedge tool to calibrate the resistance. Tutorials online have you use a stick with a line to set the right height, so we followed those and then I created a model for it. The model…
I tweaked my design so it will also work with iPads or other tablets, as well as phones. The angle is also slightly shallower as a consequence. Print it on its side, warping may occur but it shouldn't affect the function. Printing with a…
Very simple thing my wife asked for so she could hold her phone in front of the Peloton screen so she could occasionally do Zoom rides with others. Print on its side. Category: Organization
Print this two part phone holder to help hold your phone while riding you peloton bike. The two pieces fit together and hang over the screen without obstructing your view. Use a bumper or stop to keep it from falling off of the side.…
I have a ceiling mounted TV in my basement gym and placing the Peloton Guide on top was not ideal. Not sure if the holes for the stand of my Samsung is a standard size, I set M5 mounting holes 47.5mm and 48.5 mm apart. Certainly…
Tablet stand for a Peloton bike. Designed to hold tablets and phones of varies sizes in different orientation. All parts can be printed without supports. Print one each of the short, medium, and long bars and the main tablet holder. I…
We‘d often misplace the hex wrench used to tighten the bolts on the bottom of the Peloton bike shoes, now it has a home attached to the seatpost of the Peloton. No supports needed. Print with PLA or PETG as it's not weight bearing. Flat…
