Counting matching models…
I designed this to support some document frames which are 9mm wide as well as a lithophane which is 4mm wide. I've included STLs for 2mm through 12mm in .5mm increments with tilt angles set 1 degree less steep for each 4mm of increased…
This is our new 3D-printed lithophane picture box model! You can add your favorite photos and memories by converting them into lithophanes and adding them to the picture box frame. These work great as personalized gifts, or are a unique…
Ich habe einen Bilderhalter designt um ein gerahmtes Bild aufzuhängen. I made a picturehanger for a wooden framed picture
An updated "side" piece designed for hanging the 'Picture Frame (A4)' by rorys3D in landscape orientation.
3D model komixový obrázek Demon Slayer Kimetsu pro dvě barevná vlákna (např. bílá a černá). 3mf čas pro tisk 4 hodiny a 14 minut. Rychlost 0,3 mm. Rozměr 104 x 1950 x 4,7 mm. Pro PLA.
Description Picture size 4x6in (10cmx15cm) and 1mm gap between two parts of the frame for your photo These are frames that can be joined together in groups of three or more according to your wishes. I made 5 different types as you can see…
Simple frame to hold pictures on magnetic surfaces. Uses 6mm diam x 1mm magnets
Playable TicTacToe Picture Frame. It used 5x3mm magnets with print in place. Printable without support. Frame: 18x magnets X and O: 18x magnets For best practice, use 2x nails. The different between the nails must be 110mm. I also added…
I hope, you find this useful. I would be glad for some small donates for my work (-; If so, click on the "Tip Designer" button If you want to have the name changed, please contact me. I would be happy about a coffee tip per PayPal.…
A theme picture frame with interchangeable design easy to assemble easy to print
This Model represents a fire truck of OSP Krzykosy Poland the full picture size is 400x 265 mm. The picture was cutted to 8 diiferent size parts 100x133.33mm to be able print it on smaller printer. Print at 100% infill with a layer height…
Printables won't allow me to give credit to multiple users, but I would still like to say that I remixed amazing models made by other users: 3DPeter, Juli3n, Mini_Blocks, razgvo.cv.
I needed a thesis holder for my graduation party, so I created this model. it is also suitable for holding paintings, it is very sturdy with infill of more than 15%
I created a parametric Picture Frame for Ikea Skadis Peghole Board. Download the attached Autodesk Fusion 360 file to adapt the model to your individual picture size. Parameters PicWidth : to change the width of the picture PicHeight : to…
Customize This model is parametric - it's designed for customization. You can easily change parameters like lenght, width, angle, tolerance in Fusion 360 . If you don't have this program , you can choose from one of the examples I've…
A simple multi color photo frame for mom on mothers day.
Clip together frame. Two versions, singe glazed and double glazed designs.
The more you get into the topic of SmartHome, the more you ask yourself how you can bring all this data into your normal life in the most convenient and attractive way possible. One solution to this problem is my MagicMirror project . I…
made the face convex and added a backer to the center hole, i also recessed the center hole to fit a hueforge done by Don Matis “jack skellington” here on printables https://www.printables.com/model/604843-jack-skellington
I designed this picture frame style holder for the TRMNL diy kit. It includes a stand to place it on a desk or you can hang it on the wall. It uses short M3 threaded inserts to mount everything together. What i used:…
An openGrid mount for large 3M Command Picture Hanging Strips ( like these ). These include Multiconnect threads so other attachments can be mounted to the same grid space. There's also a spacer model included, which can be used to…
🎃 Pumpkin Stand Holders – Festive, Functional & Scalable! Celebrate the season with these charming pumpkin stand holders—perfect for propping up your phone, photo, business cards, or mini signs. Choose from single, double, triple, or…
Bookmark with hand drawn landscape, great as gift. Single extruder. Fast to print and low cost. It looks nice when printed on some diffraction plate. I used glitter fillament on the blue one. No commercial use without permission.
I got bored and made this in tinkercad
🖨 3D Lithophane – BMW Front Design (Curved) This 3D print file features a curved lithophane with a sporty BMW front design set against a dramatic mountain/gorge scene. Depending on the lighting, the effect of the image changes…
If too big, please scale down to save filament .OBJ is just for viewing, please print one of the PRINT files
Picture frame for 15x10cm pictures or puzzle. You will need: 8x 3x15mm magnets Feel Free to add a plastic sheet in front of the picture/puzzle for extra protection. I personally used some 0.3mm clear PVC I had lying around.
This little shelf is meant to be tacked into drywall and then you can rest a picture on it. Not recommended for glass containing frames or anything fragile.
Sigue siendo un modelo simple de imprimir como el original. recomiendo imprimir de costado asi queda mas fuerte y sin soportes . yo lo hice con una superficie rugosa en el exterior del modelo para darle un efecto distinto. pero solo 0.2…
Rustic-style picture frame designed for a 15 × 15 cm acrylic sheet (1.85 mm thick). Required components 1× 150 × 150 × 1.85 mm acrylic sheet 1× 3.5 mm threaded insert 1× M2.5 bolt Frame must be printed with supports.
Optimal Photo Size: 10x15cm The frame is designed as a modular press-fit/magnetic assembly with a separate backplate and stand. The photo is inserted from the top through a dedicated cutout, making it easy to change pictures without…
This model is a double heart-shaped artwork with a rectagular cutouts in the front area, perfectly suited for a small photos measuring 2.8cm x 4cm. This double heart provides a unique way to express your love and affection. Of course it…
I made this spacer for a picture frame that I bought to install the Lego Periodic Table of Colors from We Love What You Build. I couldn't find a picture frame that would fit it well and I liked this one. It came with a piece of acrylic…
The frame for my college diploma came with a unique mounting bracket. Since i moved houses i ended up losing the female half of this bracket. I redesigned the male bracket based off the one i still had and designed the female based off…
Print a picture frame that fits 5" x 7" pictures for the World's Best Grandma in your life. Can be hung on a wall or print the optional stand. Recommended to print the frame with normal base plate only supports. The stand and backplate…
These files allow you to hold an Inky Impression inside an Ikea RÖDALM frame and mount it to the wall, with enough clearance for a Raspberry Pi Zero with a WittyPi Hat. The frame is attached to the wall mount using some slides, allowing…
Key Features Dual-Part Snap Design: The frame consists of two interlocking pieces (base and top cover) that provide a secure, screw-less fit. Artistic Customization: Includes three unique decorative pins —specially designed accents to add…
Printed with a Bambu P1S in PETG without any supports.
This is a quick remix of Fritzi_001's picture hanger I removed the screw holes an added a chamfer to allow for a press fit or use of glue, depending on the accuracy of the cutout. Also adjusted the size to use 4,5 mm wall screws as I only…
For the pictures from the insta360 pocket printer. Added 7x2mm magnets to attach the support or stick it to the fridge. Added a drop of super glue to the channel to attach the two halves togheter. Easy to print whitout supports and in…
A simple Stand for Pictures up to 5mm thick with the additional feature of holding a lego figure in front of the picture.
A picture frame made for squared photos. The format was chosen to get the most out of a small printbed, like the Prusa MK3. I also uploaded a much bigger version, for larger print beds. Compared to my last picture frame, this prints much…
A very small and simple 1g stand for label printer pictures as shown. Will fit standard 14mm width tape (pictures shown are 14x60mm). 'We have Polaroid at home' kind of thing
fits any photo that is 5 14/16in (149.225mm) by 4in (101.6mm). I printed a phone stand to post up picture frame. Pretty thin frame so doesnt take long to print, like an hour max.
size: 202mm by 118mm Edit: it's not this size anymore, it's scaled by 1.2
Chopin piano picture frame I made for my list of historical figures that I like. It can be printed without an MMU. If you're printing the version with the sheet music it'll be tricky. Top part snaps in place tho you gotta be lucky with…
This tennis-themed picture frame is designed to add a little personality to your space. To ensure your picture fits right, first download and print the Picture sizer STL, you can then place this on your picture in the correct…
this is a simple quick picture frame it is made for any size frame or picture
This picture frame concealed a secret compartment. It stands freely and prints with no support. Add four 5 mm pins (thick barbecue skewers) as registration pins and in order to keep the box shut.
Needed an easy to print picture holder. Printed standing up with no supports, if you lay it down you might need supports for the inside. The tab above where the picture sits, you can put text there.
Simple and modern 4x6 picture frame. Hangs in 2 orientations. Add a Glass insert, place the photo, snap on the back, voila! Assembly video below. Printed on an smooth effect plate to give it that pop you see in the photos Assembly:
Symfonisk bookshelf speaker wall mount at a 5 degree angle. Print on its side and use 2 x 4mm bolts and nuts for securing to the Symfonisk itself with standard mounting holes.
Marine Corps cadet enlisted ranks (in picture)
Floating picture holder for postcard size (6"x4" or 148x100mm) pictures. Tuned for Canon Selphy paper
Mobile Phone Stand that you can add a photo of you loved ones when its not being used to hold your phone. Great for offices and desks or beside your bed. I am currently working on V2 that takes a charger to become a docking station.
Bins I designed to hold my A6 photo prints! Also has a version with dividers I made for packaging of various sizes. The ones I printed are a bit shorter than the original model, as my filament ran out just before the end of the print and…
Celebrate the most special woman in your life with a gift that speaks a thousand words. Showcase your favorite memories with our beautiful Freestanding MOM 3D Picture Frame . This unique and modern piece of home decor spells out "MOM" in…
Simple and minimalist universal picture frame. The two parts of a corner are to be glued together. For better alignment while gluing, the top has two small alignment pins. To hang up the picture, just stick the four corners to a wall, and…
.print in white for the effect to work best .pla works well .if you have warping issues, use a brim .if you have any problems, I'm here to help THERE MAY BE MORE PICTURES LIKE THIS...........................
The STL file is for the Large Command Strip. For Medium size Strips scale to 76.19% or there is a 3mf file with already scaled one.
Made a similar variation of those plastic hangers you can get at box stores. Recommend 1-1/2" 16ga nails.
This remix wraps the Guition 10.1" / JC8012P4A1C display in a clean, frame-style housing suitable for wall mounting or desktop use. What's in the download: Source: STEP files are provided so you can adjust the dimensions or mounting…
The trim pieces can be printed in a different color from the backing if you wish, since they are separate pieces. Just use CA glue to join the pieces together and then (when dry) slide the picture into the thin slot on top. If you use the…
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
I redesigned it to be printed in flat without support so that I can get a smooth surface for better adhense.
This is a Box to carry the pictures of Instax Mini. i always had the problem to put the pictures in a safe place where they dont get scratches or the bent. So i design this picture holder for up to 10 pictures of InstaxMini. Category:…
Painting and picture holder, you can put the holder or glue it to the frame and place it on your nail in the wall.
Cute Santa picture decoration for your home or office. I do a lot of multi-color prints, but I wanted to make this one accessible to all. Each piece prints separately and it all fits together in the frame like a puzzle. A stand is…
I created this model to frame my polymer clay art, and wear it as a pendant. Included with the model is the cutter needed to size the polymer clay with a good sharp edge for precise fitment of the clay to the frame. The pendant is…
Box to store codenames pictures in, 3x types of cards and the plastic card holder. This is for the rectangular maps.
This stand holds a 2.3mm piece of acrylic sheet upright. My brother asked me to design it based on an existing CNC cut piece of acrylic that came with the stand. I designed the gap to be 2.4mm in the slot and the sheet is 2.3mm thick, so…
