Counting matching models…
[Updated 2026-02-02: released additional part: “1-7 pie", a requested missing fraction for the set, description updated.] Notes: A compact version was made that can carry all the pie pieces in one container here:…
Simple chess pieces. Only the knight really needs supports. Hole in bottom for 5mm diameter magnet which would need to be glued in as designed. Create in Tinkercad.
Pieces for the board game The Voyages of Marco Polo. I tried to redraw based on the pictures only, not having the original one. Only the Camel is made by TorbenLB ( https://www.thingiverse.com/thing:2756171 ), too nice design to draw the…
Since MosaicManufacturing was amazing in their creation of the remastered Catan board game, I thought their creation deserved more realism. That's why I designed these game stones. I hope you feel like you're walking through your hubs…
These are replacement Tetrimino pieces for the Tetris Dual game. I had bought this game at a charity shop, but there were a few pieces missing. It was playable without them, but made it a slightly unfair game. I decided to model the…
A simple holder to hold your chess pieces silicone molds while the resin cures. Print the top with the legs up, the labels should be small enough to not require supports, print the bottom with the recessed holes for the legs up. I used…
Transform your jigsaw puzzle experience with this innovative stackable sorting boxes! Perfectly designed for puzzle enthusiasts, these boxes offer a smart and convenient way to organize your puzzle pieces by color, shape, or section. A…
A simple leg, 22cm tall, but divided into 2 pieces with T10x2 screw. That makes it printable on every 3dprinter, and also adjustable to level. I have printed it on petg, 10% infill. Una sencilla pata de 22cm, pero dividida en 2 piezas con…
A box to keep the chess pieces for the Star Trek 3d chess by mageb (73643)
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Design inspired by pieces assembled to create minimalist paintings and ornaments. Print them in different colors or materials and personalize every detail. The only limit is your imagination! Share your designs and creations in the…
This is an improved Riser for the FlashForge Adventurer 5M Pro. I made the fit better and removed to tab slots that didn't work for me. The front sides have 2 x 5mm dowel holes and 2 dowels. The rear sides include the 3 rectangular plugs…
Boczne zaslepki do transcivera Omni VI
Print however you want but just remember the thinner the layer, the more detail. Supports are recommended.
Made this to fit a 1999 Fleetwood American Tradition motorhome but it should work for any other application. You just need 2 screws to clamp the 2 pieces together.
Fits on 2 sheets of an A1 Mini. You can also use a 3/8" wooden dowel as the stick. The swatter fits a rod that is 9.7mm in diameter. The mesh part of the swatter is designed to be printed in straight lines. Use .2mm layer height so that…
I created this interlocking grid system to play Qwirkle without worrying about the pieces getting knocked out of alignment at any point during the game. The grid fits on almost any 3D printer, prints with no supports, and you can print…
Chess pieces under cheese theme, including pawn, rook and bishop. Designed in Autodesk Fusion.
⚙ Printing settings: Supports: No Brim: Recommended Infill: ~10% (approx.) 🎨 Printing colors: To achieve the same look as the thumbnail, print the base in black, and the cover in yellow. You can also do the opposite if you want a black…
Can you solve this puzzle? To print the puzzle you will need to print the same piece 6 times. Good luck!
Description These are test pieces used for verifying if the DDR5 RAM coolers here will fit your motherboard before you pay any money for them. It is intended that you print the corresponding test piece you want to try and then attempt to…
This insert will now hold all of the two main reinforcement expansions for the game. I added separate trays for the command tokens. You will need to print two of them. I also added card containers for sleeved cards which you will also…
This is a set of nine different pieces for use in board games. The set includes: Worm Baby Stroller Camera Smartwatch Lab Beaker Paprika (Bell Pepper) Running Shoe Bike Flower
Agumon and Gabumon sprites to be used as player pieces for the VPet Battle Board made by DigitalDream09
🎲 Overview Enjoy the timeless strategy of checkers with this modern 3D model set. Designed with clean lines and a minimalist style, this set offers a fresh take on the classic board game while remaining fully functional for play. ✨…
This is a remix of the Core One + spoolholder split into two pieces, one containing both a male and female bayonet fitting and the cap with a male fitting. This uses two O rings of the same type as the standard spoolholder. One piece can…
Who can find a way to reassemble the six parts to the Devils Knot? Size: 60x60x60mm Print: 2x Devils Knot Part 1 1x Devils Knot Part 2 1x Devils Knot Part 3 1x Devils Knot Part 4 1x Devils Knot Part 5 Print Settings: Material: Prusament…
Engineer Hassan Zain created this project to move the tea bag. He published it on YouTube and it got 26,000 views. You can print it and make it for free! What are you waiting for! any 3d printer can print no soldering free code
I designed a couple simple extra pieces that work within the same modular system if people want more options that weren't specific characters I used 3D E's models and just remixed the shapes and such making some custom body's, emitters,…
Use the plastic of your choice. Printed all pieces with 100% infill to give them a bit of weight. I used a .4 nozzle with .15mm layer height. Supports recommended on the Bishop, Queen, King and Knight overhangs.
I could not find (free) inserts for this version of the Santorini board game. Check the pictures if you have the same version (second edition). Consists of trays for all the game pieces to replace the plastic bags. I think it is a neat…
Spiral fidget chess pieces. Made with Onshape. Useable for playing chess. Imagine mixing the inside and outside pieces. A lot of fun!
Overview This remix is of the awesome Clothes Folding Board / Shirt Folding Board . I split the panels up to fit onto a 220x220x220 print bed. The bottom panels are split in half with dovetail joints and top panels were split into four…
A simple chess board with chess pieces. Took me like 8 hours to make as a beginner
Pieces for the game "Otrio". Clearances tested with .4mm nozzle (.45mm nominal extrusion width) and .6mm nozzle (.675mm nominal extrusion width).
Hedron Stack pieces separated to individual STLs so you can reprint single pieces.
Alternative set of hollow pieces for HedronStack balancing game. You can see through them, if you print with transparent filament, you may be able to see through the sides partially as well. You can either replace original pieces with the…
Print up to 3.0mm height. Then pause, replace filament and continue printing. Music keychains from the musical collection are stylish 3D models in the form of miniature musical instruments and symbols, ideal for keys, bags, or gifts for…
I picked up a used copy of split-level aggravation and it was missing some of the player pieces. Designed this in Fusion so I could print out the missing ones. I printed this with the bigger end down on the build plate. Just like the…
I designed these joiner pieces for the DC DC converter for Makita 18V batteries. Such as this one: https://a.aliexpress.com/_EyOylj6 I really did not like them being loose and held together only by wires. These pieces allow you to connect…
If you feel like your Hedronstack pieces interlock with too much play, then this remix is for you. Compared to the original pieces, these interlock with 30% smaller gaps. The pieces are more satisfying to place with less free-play, the…
Player pieces for Dakanzlas 2.0 Catan version. Simple and recognisable design for easy play. Print in different color for each player. Print the following amount of each piece for each player: Road x15 Settlement x5 City x4
Mounting plate for Milwaukee Packout cases. Comes in 3 interlocking pieces, so it can be printed on a 220x220 build plate. Plenty of holes for mounting screws. Can go on a shelf or on the wall.
This is chess where you can use the chess board as a lid on top of a box in that box u can add a tray where u can keep all of the pieces
Pieces for a board game called stratego, you print the body and the little image then you put the little image into the body to make a piece.
The original wall anchor piece only lets the screw to hold/squeeze the bottom half of the part wall anchor printed part against the wall which means it's if you pull on the base plates, it can break there, leavinf the top half on top of…
This is a replacement lid for the vintage Risk game pieces box. Should be a snug fit. I only tested PLA.
Print, then remove the 3 pieces from the printer plate and its ready to go!
Added a block and square cutouts to the bottom of Body2 and Body3. I had to upload .3mf files because PrusaSlicer can't export .stl files that contain a negative volume.
The small piece replaces the white plastic part that the hose is glued to. Big piece is the Camlock nozzle. Put the original locking part over the Camlock adaptor and then glue on the small piece with epoxy. Notches are to make unlocking…
These are simple chess pieces created a while back. Besides the knight pieces, they do not require support.
Do you own a copy of the Harry Potter Hogwarts Battle - Build-a-Deck Game and your cardboard influence pieces are jealous that your villain tokens are made out of pewter and thus look 120x more awesome? Then 3D print these models for…
By popular request and after much delay (I don't check printables super often), I am uploading the holder I made for the custom Cities in Catan! Here is the link to the Cities, Villages, and Roads I used made by jpdesign:…
Hang some brightly colored tetris pieces for visual stimulation and 8 bit flair! These tetris pieces are compatible with the hangers + spreaders from the original model. Files are named as looking down from above - e.g., the L piece is an…
A sweet twist on classic brain teasers, this cupcake-shaped 3D puzzle combines playful design with an engaging challenge. Made up of 11 uniquely shaped interlocking pieces, the puzzle forms a charming cupcake complete with a textured base…
I printed out LUDO game pieces by Pavel Riedl. To keep things organized, I printed a box for the pieces, with one extra for each color. Wydrukowałem pionki do gry LUDO, autorstwa Pavel Riedl. Aby zachować porządek, wdrukowałem pudełko na…
Printed in PLA at 0.12 layer, 6 walls 25% infill. I use a 2 layer raft for better adhesion, printed upside down, finished, polished with 600 then 1200 paper to ensure smooth radius edges.
This model is designed for printing with PLA, TPU, and PETG filaments, but also supports other materials. Dimensions: 28, 26, and 1 mm . Printing takes approximately 8 minutes and uses 1 meter of filament. It prints without support.
pieces to chess https://www.printables.com/model/1674921-screwdriver-bits-chess/comments
I split the original into two parts that fit together. The new file size will now print in Bambu P1S. 3 Walls, 20% infil, 5 upper and lower layers. I used a little heat to get 2 parts to slide together easily.
This is an international shogi set so you don't have to deal with Kanjis if you don't want to! This has been a requested project so I hope you enjoy it as well. This designs are inspired by the ones made by Hidetchi and are designed by…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Uses 3mm x 3mm cylindrical magnets (axial polarized). This is large enough to store the base set plus the seafarers ships. There is still a little bit of room left at the top, but I'm not sure how much more you can stuff in there. I also…
Is it a rainy day with nothing to do? We’ll have no fear and print this fun chess board. You can do color swap to make it have different colored squares. Printing Settings: Resolution : 0.1 to 0.2 Support: Yes For chess pices Infill : 25%…
Update: view the new complete set here: https://www.printables.com/model/1101116-full-classical-staunton-chess-set Hey, I'm Matthew Stevenson! This was a solution for one of my school teachers, who contacted me through the company My…
Have you ever wanted your own special playing pieces for playing Settlers of Catan? Bring these to your next game. Play with a set of pieces in the style of a Czech/Dutch/European village or city. These can be used in the original game…
Tricky Rails and Sins of Our Fathers are trick taking games designed by Daniel Kenel. Each of these games utilize a 37 space hex board. The game and rules for Tricky Rails can be found here . The game and rules for Sins of Our Fathers can…
Description Remake using Gameboard bases for Quarto. Printing Material: Conductive PLA from Protopasta
The one-piece model was designed to be fully integrated. The model, designed in 5 pieces, is both more stylish and more visible on your wall. I designed it to be 2mm thick. I hope you like it. Stay with 3D..
Designed as interlocking pieces. You can split to parts in Prusaslicer to color the individual elements. Added an XL 3mf with the pieces already split. Also added the heart as a one full piece in case you want to print a life bar display…
DVONN is a fantastic 2-player game, and is one of my favourites of the GIPF series of games by Kris Burm. This print replaces the cardboard insert (of the Don & Co box edition) with a new board and a place to organise the pieces nicely.…
Have you ever wanted your own special playing pieces for playing Settlers of Catan? Bring these to your next game. Play with a set of pieces in the style of Egypt/desert house and pyramids. These can be used in the original game and they…
The pawns are squares with cones, the star with a cone is the bishop, the hexagon with a circle and cone is the knight, the circle with a ring, hexagon, and cone is the rook, the cube with a cylinder and cone is the king, and the cube…
Both parts were sliced in Cura and printed slowly with auto generated supports in Hatchbox PLA+ . Note I chose to orient the stem on its side to improve the end detail with its 1mm thick swept lip. Rip the supports off the part as soon as…
Imperial Socket Holder 9 pieces - Gridfinity socket sizes are… -5/32 -3/15 -5/16 -9/32 -1/4 -11/32 -3/8 -7/16 -1/2
Hello! Please enjoy these free models of Volvo 240 doorlatch trim replacement parts! This mounting Styles allows you to install the trim parts, without taking off the door panel. You'll have to maneuver the cutout of the trim piece around…
For 1 player you need to print the Pawn x 8, Rook x 2, Knight x 2, Bishop x 2, Queen x 1, King x 1. There are 2 versions of the board, one is in 4 pieces that need to be glued together. If your printer is big enough you can print the…
Remixed from https://makerworld.com/en/models/530338 , I separated the top and bottom of the sandwich so they can be printed separately. I also included a half of the inner part if you can't multi-material print. You will need to glue the…
These puzzle shaped building pieces are great for building stuff and increasing your creativity.
The squares are designed to fit the board tighly, althought it might be better to glue them.
