35 models
This is my take for the insulation and mount plates for the Mellow Fly MiniAB or BigTreeTech Piggyback36 boards. There are two models available, one which the stepper mount holes sits horizontally, typically for Sherpa Mini, and other in…
Insulation plate and standoffs for Bigtreetech Piggyback36, for extruders like Orbiter, Sherpa ect. https://paypal.me/radicalreel Use heat inserts for the standoffs The 1mm gap between stepper and insulation plate is intentionally to get…
I will have 2 of these Samsung T7 Shield SSDs and wanted a way to organize them. After seeing the OP design, it was clear what I needed to do. All I did was take a slice of the model, in TinkerCAD, and made it 15mm wide. Then, make a…
I loved the model by ADHDid but needed a solution that could fit both my 12pt and 6pt shallow sockets without reprinting the deep socket portion and labels. So I split the model in half and removed the fillet so they could be placed in…
This is a remix of fbeltrao's great Insulation and Mount Plate for the Mellow Fly MiniAB or BigTreeTech Piggyback36 boards. The plate was made stiffer without changing the external geometry.
A small amount of support is needed for the screw hole. YMMV.
these are a couple saddle plate options for 1/14 scale RC trucks they are used in the transport of additional trucks
I loved this Scope but I wanted a version without the piggyback reflex.
Made this spool holder to be able to mount large (300mm) spools to the X-Plus, as the spool holder rods dont't extend long enough to properly support those. May not be the smartest solution, but works for me. Be careful with spools that…
Be Warned: I'm neither a motorcycle mechanic nor an electrician, so modify your bike's electronics at your own risk! This is an alternative to the stock fuse cover for the Triumph Bonneville provides the extra height and wire-out hole…
This is a cover to hide all the cables from the Toolhead + a strain relief for the board You can Find the ToolHead here! https://www.printables.com/model/677824-cn3d-mini-stealthburner-4010-blowe-fan-volcano if you are intersexed in the…
Use this quick print adapter to connect male Dupont pins to a DIP-packaged IC on the fly. I mainly use them to program Atmel AVR chips via ISP with a USBasp programmer with optiboot Arduino bootloader via USB-TTL converter with…
This is a mount for the BTT PiggyBack36 to suit the Orbiter 2.0 extruder. M3 5mm OD 4mm Length heat inserts.
KLIPPER EXPANDER The stock SV06/Plus MCU board doesn't have enough ports for controllable fans. This mod allows you to mount a Voron Design Klipper Expander board for more. The board adds 4 ports for fans or small heaters, a port for an…
Use this quick print adapter to connect male Dupont pins to a DIP-packaged IC's pins on the fly. Meant for in-system-programming (ISP) AVR microcontrollers, but surely there are other uses, e.g. in-circuit testing with logic analyzers…
Modified "missile switch" cover for the KarlKers, etc... extension cord in-line switch w/ piggyback plug. There are many different brand names for this on Amazon: This is the one I ordered:…
Primer feed tube adapter for the RCBS Piggyback press. A piece that often breaks and is not available anymore "anywhere". Here is the small and the larger primer version. Prints best on a resin printer, but FDM with high resolution should…
Update 02/2022: V2 design added. Its now taller but without wide part for the charging board, which now sits in the bottom. Intended for usb-c charging board with protection: https://www.aliexpress.com/item/32971075877.html (make sure to…
Enclosure box for Arduino + Arduino CNC Shield 3.0 + AC Input Jack + "buck converter" + Emergency Stop button. Needed something to mount all this stuff and protect the exposed connectors. Working on a cover that will hold a small fan and…
Very simple, two-part snap cups allowing adapting the Apple stand for Samsung Galaxy. The parts themselves are start points for other versions, even standalone or wall-mounted chargers for Samsung Galaxy watch. PLA, drop of super-glue and…
This is an 'Overmold' style strain relief for 14 and 16 pin microfit connectors, commonly used for umbilical and FYSETC Catalyst toolhead PCBs. Use the 14 pin for common Umbilical (i.e. LDO), and the 16 pin one specific to Catalyst V1.…
This is a part cooler for the E3d Chimera or Chimera+ hotend. It clamps between the heatsink and the fan. Separate versions are provided for the Chimera and the Chimera+, as they have slightly different dimensions. I only have the…
Supports the "Raspberry Pi rack case or rack cluster" thing found here: https://www.thingiverse.com/thing:2795195 Attaches to the side using #4 sheet metal screws and 3/8" cable loop/clamps like these:…
These are custom-designed PiggyBack brackets and mounts for the PSU of the Prusa i3 MK3 , created as part of a heavily modified, Klipper-based build. The brackets were designed in Fusion 360 , with a focus on clean mounting, rigidity, and…
Most 5015 part coolers are for a specific printer's carriage. This one simply piggybacks on the 30mm fan of an E3Dv6. In the second picture above, you will see 2 of these printed with the exact same settings. One with this installed and…
A piggyback mount that allow for mounting the Centroid THC-RX board on top of the Acorn plasma controller. the mounting holes for the THC-RX board are design to take M3x6 Heat set inserts, I also used a .25" standoff spacer to mount the…
If you find my designs useful, please consider sending a tip Adaptor to use a piggyback mount screw and plate in a dovetail mount. If the bolt is too long, put a nut on it on the inside Print Settings Printer Brand: Creality Printer:…
Added cutout for BTT Piggyback36 extruder header to Rapidburner PCB mount for WWG2.
Intended for use with this filament cutter.
This is a mount for the BTT PiggyBack36 to suit the Orbiter 2.0 extruder. M3 5mm OD 4mm Length heat inserts.
This is a part cooler for the E3d Chimera or Chimera+ hotend. It clamps between the heatsink and the fan. Separate versions are provided for the Chimera and the Chimera+, as they have slightly different dimensions. I only have the…
Most 5015 part coolers are for a specific printer's carriage. This one simply piggybacks on the 30mm fan of an E3Dv6. In the second picture above, you will see 2 of these printed with the exact same settings. One with this installed and…
I loved this Scope but I wanted a version without the piggyback reflex.
I will have 2 of these Samsung T7 Shield SSDs and wanted a way to organize them. After seeing the OP design, it was clear what I needed to do. All I did was take a slice of the model, in TinkerCAD, and made it 15mm wide. Then, make a…
The Creality K2 Plus Pack Rat Mod (Piggyback upgrade) This is an extension for the FREE Pack Rat organizer: https://www.printables.com/model/1152811-k2-plus- This is for the people who want to support my future designs for the K2 Plus.…
![Sovol SV06/Plus MCU Piggyback for Voron Klipper Expander Board [PRELIMINARY]](https://media.printables.com/media/prints/799574/images/6203171_fb61da42-813e-43fb-b0dc-7a18faabb304_157023a3-256f-4874-99d5-3ba5cfbf0e3e/left_view_open.png)
