5,792 models
A desktop nameplate, sweeping around in a circle. Customize it to show your name or text. To do that, use the makerworld customizer (fonts are only Arial currently) or install OpenSCAD on your own computer and follow the customizing…
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
3 different hooks and rings for sliding into caravan slider. For clothesline towels and other atachment.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I printed them small for the shelf I want them on, I'll wait till my kids notice it and then move them around I use PLA marble The podium and attack angel do not need supports, the hiding face angel does need supports, and you need to be…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Those feet have a 70° degree of freedom to accommodate the angles of the MH500 chair from decathlon . Perfect for wet grass or uneven terrains. In PLA. The ball part has a full membrane on the bottom for easy printing. Use painters tape…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
The model is a clamping set for fastening workpieces for further processing on different surfaces. A set of clamps consists of three parts: 1. a block 2. one clamp 3. one screw To clamp the workpiece, the block must be placed on a flat…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Inspired by the adjustable foot I found on Thingiverse ( https://www.thingiverse.com/thing:3154181 ) I realised my own design that does not need any screws to attach it to the IKEA Lack table foot. The foot just has to be cut down by at…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a very straight forward print with the ability to change colors and size to your liking.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
4 designed and printed pieces placed in a base. These are pieces for rotating ceramics, and are used to give a jar the geometry of the design profile. Each piece has two profiles. In the attached image you can see the result obtained with…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
I printed this Miter Clamping Tool with Fuzzy Skin on the outside in Prusaslicer. This gives the clamping tool more friction on the surface of the wood. You could also glue a piece of sandpaper to the clamp to add more "sticktion". I…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
Apple airtag for shaping the leather case Print the part twice and glue together. In the middle of the part there is a small reservoir for excess glue. Example of use. 1. Make a leather case 2. Print the Airtag dummy 3. Put this model in…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
A cleat I made to wrap the lines for my tarp, to make it fast to deploy and pack. It doubles as a tension device. To use it to tension the rope just pull the line through the big hole and around the ear, like pictured. Use the same method…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
This is a parametric Fusion 360 model to quickly generate a test object with specified hole diameter that decreases in steps of 0.1mm. Easy to find the right hole diameter for self tapping screws, bolts, inserts and/or press fit axles,…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This coaster reminds everyone to use the FLIPPING coaster! Color change print in ABS. You can adjust size as needed.
Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant
Set of two sleeping dragons - 25 cm, 10 cm, 5 cm, toppers (two colours)
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
The provided stencil is designed for the FedEx Padded Pak, but don't hesitate to personalise it and mark your spots according to your preferences. Suggested print settings: Layer height 0.2mm. Infill 15%. No supports are needed. If you…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Something to think about PS: Thanks to blechbude for the suggestion to make it into a key chain.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Something to think about
Print approx. €2.53–€3.10 excl. taxPreliminary estimate for one variant
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) Check out more on my profile: https://www.printables.com/model/1391989-minimalist-cat-sculpture…
The sign is mirrored, so the exposed part will be the one laying on the print bed. This ensures better finish of the sign. This whimsical and humorous 2D design features three curious cats 🐈 peeking around the corner, with their head…
A cute low poly cat sleeping on a pillow. Quick and easy print that does not need supports. Pillow and cat are given in separate files in case you only want to print the cat or print it in separate colors. Members of the “Low Poly…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
A set of cat ears with lots of features to (hopefully) keep them in one piece. Bed Adhesion - should stick just fine but some printers might need “mouse ears” Layer height - 0.2mm (finer layer heights with make the top surfaces smoother)…
A Doctor Who / Greek-inspired female marble statue. Tree supports recommended. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A simple test to check the bed adhesion and shrinkage of your filaments. I designed the model so that it should definitely lift from the bed. I wanted to test how much different materials shrink and how the enclosure affects them at…
A Doctor Who / Greek-inspired female marble statue. Tree supports recommended. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A cute sleeping dog in the style of carved wood. Supports are recommended. Scalable. Check out my other animals! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Update 2023-10-10 Made some sculpt, optimized the pose and made it more stable on table. A cute umbreon taking a nap. Pose inspired from my cat and here she is: Original model with armature deform has been posted on Sketchfab for remix: →…
Tested and printed without issues using Cura slicer. A 20ft shipping container is a standardized steel unit, 6 meters in length, used for the safe transport and storage of goods by sea, rail, or road, and it is also commonly repurposed as…
Assembly instructions. Insert the blade from the front. Then tighten with the printed screw. Easy to print, easy to use. No screws are required to secure the blade. Use a new blade to avoid tearing the paper. Be careful when handling the…
Documentation Updates Model Version Date Description 1.02 9/3/24 Added to the errata a workaround to close the gap between the right eyecup base and the adapter base. I realized this hole could allow dust to get on your lens. I'll close…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
I had separated and resized the model by 3d_by_EB (from a design of IslandDan) to 66% to fit with Daleks printed for my niece. A workmate suggested adding a hole in the Angel's base for use on Christmas tree. Great work from original…
Documentation Updates Version Date Description 1.00 9/4/24 Initial Documentation for v1.00 f3d files Overview This customizable phone adapter for spotting scopes uses an integrated Magsafe magnet to secure the phone to the spotting scope.…
Introducing the latest innovation in the world of shopping cart coins: the all-new, upgraded version of the wildly popular original! Suitable for European, and possibly other, shopping carts. https://www.printables.com/model/408121 This…
An easy to print ho scale wood shipping crate.
Here’s a fun little illusion piece I designed—looks like a bright puddle dripping down the edge of your shelf or cabinet. It’s a single-piece print that creates the effect of spilled paint, slime, or wax frozen mid-drip. I printed mine in…
Hey guys, This is my first model ever published so please adjust your expectations to the learning curve:) This is as buildplate holder for Reality Halot Mage. I had those in the past for my other printers and I've experienced the…
Dropping mechanism designed to release a payload from an RC aircraft using a servo motor
Edit: Much better version of the hexgrid available here, by Derare! Get some super cool cobblestone road tiles by Skaldamar here! He also remixed some neat settlement tiles here! Hexgrid (functional but non-final) download:…
UPDATE Bottom , Right top, Right Lid and Top left lid modified - Fitment / Dimension issues resolved. print temp= 210c print bed= 60c filament needed= +/- 380 grams Will need light filing to smooth edges after printing. Wifi Dev board…
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors
Minimal Supports Recommended for Muzzle Area
I'm currently running a Kickstarter to support this series: https://www.kickstarter.com/projects/jamiekorte/wheel-of-monsters-season-02-3d-printable-miniatures Support on Patreon: https://www.patreon.com/PrintedEncounter
imagine a situation where somebody cut himself and he ask you to fetch the FirstAid kit in a backpack. WHERE? most backpacks have 5pockets+ and hiding places. you cannot afford to waste time in an emergency situation! here is the…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
ENG: This is a Shopping Cart Coin . This is a remake from our older model, and we have improved it and fixed its issue with the key holder . Feel free to contact me in case of a problem! FR : Voici une pièce de caddie . Il s'agit d'une…
Different shapes of small containers to use when going camping. Use for spices or shampoo or whatever. UPDATE: Due to comments, I have added another model with smaller and tighter threads. The square containers might have issues with…
The adapter plate is pretty simple to print, it only has a few places with straightforward overhangs. No additional hardware besides a phillips head screwdriver is required. After the print is finished, you need to unscrew the base of…
A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…
A replica of Tyler the Creator's shipping container.
Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.
(Re-upped these because Thingiverse continues to be retarded and won't re-instate the availability of the original thing. For a site the relies upon content creators to give their efforts for free, for its profit model, they really are…
A super fast, super easy, and super lightweight print that allows you to hang up your bag instead of resting it on the dirty ground. Simply slide your backpack strap through the channel in the hook, and it's ready to use! The channel…
I loved @BrookTrouts knife cover, and my wife was trying to get rid of the giant waste of counter space that is known as the "knife holder blob". So, I measured a few times, and came up with these. I recommend you measure your knife, then…
This is a simple block that allows you to arrange your parallel clamps perpendicular to each other for clamping rectangular objects. You can also just use the upper sections as spacers to get your clamps elevated enough to fit cauls…
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
Quickly and easily clamp all the small things with these spring-powered parallel clamps. I made an effort to keep the design simple with easy to print parts while updating the CAD to match other SuperMod clamps. You can find an up-to-date…
Inspired by the OREA Negotiator filter press tool, this model is designed to allow you to press your coffee filter into place for the ‘no-bypass’ method of pour-over coffee brewing. The general conical shape and central stem are about the…
This linear rail is meant to be a rough representation of an actual linear rail. The replica's carriage slides along the rail, but may be lacking the smoothness and may have a bit more play than the actual thing. That being said, the…
This is a tool used to guide in shaping up your hair line and beard using clippers or even a razor. This design is based on The Cut Buddy which I purchased a while back on Amazon. This was designed in Fusion 360 and I also included a…
Activity overview: We chose the shield as our design cause we believed that this is really cool and would be really fun to make. I made this fidget with a partner, here's the link to his home page: @SriramKethin_3775782 Few things to…
As you know Prusa Mini finally got Input shaping (ALPHA). It works fine on some of the printers but others get an X Homing error. I Tried couple of things but adding C Clip to the x axis worked. Tightening the X axis belt also worked, but…
Created for simpler prints when you have problems with bed adhesion for the comb part of the original.
Shaping disk modeled to fit perfectly any Philips Pasta Maker Viva Collection. Mine follows the default 4-hole pattern which is rare for other similar models I've seen. Be sure the printer has the wall flow calibrated, try to reduce…
Arduino prototyping platform to test and experimant
Trim your beard precisely and with style for winter times. See https://www.thingiverse.com/thing:1805384 for usage instructions. For shaping the snowflakes you need a electric razor with a thin head. Print instructions How I Designed This…
Are you constantly worried that your stocking hanger will fall off the mantle? This clamping stocking hanger is the solution. This is a Christmas Tree Stocking Hanger that clamps onto the mantle, so there is no chance it will fall off.…
Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…
This is a decoy heart telemetry tool for nursing and pre-med students. The parts are broken into different pieces so that different colors can be used to make the decoy more realistic. Lightly sand any area that will be glued together…
A small jig for holding a 4/4 violin bridge blank. The blank is safely wedged in place. It has a stiffening structure on the underside, but prints without supports nonetheless.
Shopping Cart Coin sized like a 1€ coin, squirrel motive.
A shape up tool used to line your hair or beard. Very inspired by The Cut Buddy. Category: Accessories
Description: This is a professional-grade beard shaping tool designed for men who value precision in their grooming routine. Featuring a built-in comb and precise measurement markings, this template allows you to achieve perfectly…
Snapmaker J1s input shaping tune wizard have a bug - not saving picked values. (FW 2.7.1) https://www.facebook.com/groups/snapmakerj1/permalink/1112429939797317/ To tune input shaping this model created. Why? There is a standard Ringing…
My daughter and wife have been making string art projects for kids in the special needs community. They have to hammer in hundreds of small nails fairly straight and accurately placed. I came up with this nail holder that allows good…
2/8/2026: Updated the pictures of the model to show the various ways that i have begun using these. Added a shelled 2x2 - 4x4 SMD storage model. This uses 50% less filament and holds nearly double the components I learned that with my…
A vaporizer stand for e-cigarettes, often referred to as a vaping atomizer stand, is an essential accessory for any vaping enthusiast. This thoughtfully designed device provides a convenient and safe way to organize and display your…
A great Wall Art of camping. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
The branding text on the top has been removed for ease of printing. A tool designed for the Orea Brewer - to help you shape and fit flat circular filters, conical filters, or trapezoid filters into the Orea Brewer or other flat bed coffee…
No job too big or too small for these totally unnecessary tiny helping hands. Suggested by a colleague, convinced the idea will make him rich beyond his wildest dreams, he has a big plan to expand the range and make these tiny little duke…
tried to make a low poly version and its really just a less polygon version. I printed it at 50% scale. I tried smaller but the legs snapped too easy. The supports are a pain to take off and the second try I dropped the model and the dog…
Use it to sweep the interior of the bambu x1.I print with PETG and TPU.no Supports.
These attachments are designed to clamp the tumblers from the inside of the mouth. This allows you unobstructed access to fully engrave/etch the entire outside of the tumbler without the jaws interfering with the laser head. There is a…
Compact Camping Cutlery Set (Knife + Fork) – Print-in-Place Frame A lightweight, one-piece printable camping cutlery set that includes a knife and a fork connected in a sprue-style frame. Designed for easy printing, transport, and…
Edit 6/19/2024: I added the 1$, and 25c with a solid layer of one colour, i used white, I found this helps with the key ring staying together, as mine failed at the colour change. I've not had a place to test the 1$ key, so please post a…
A new 3D figurine generated by AI, a cute jumping cat. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) Pegs are made using…
This 3D-printable shipping container is designed for tabletop games like Warhammer 40K, Infinity, Stargrave, and other 28–32mm systems. It’s a clean, functional piece of terrain that prints in one piece without supports. Whether you're…
This is a stand I created for prototyping. I print everything flat and then weld it together using a 3d pen. Alternatively, you can use glue. You can also assemble the model in your slicer and print it as one piece. I created a bezel for…
Inspired by several similar tools, I wanted to create my own, using laser cut acrylic. Works with any break-away, single row, 2.54mm male header pins, regardless of length, even right-angle headers. Inspiration: Break-Away Header Pin…
This is a FLSun SR anti vibration resonance sensor (klipper input shaper) holder. I use the sensor/holder from/with the Creality Sonic Pad and Klipper. My other FLSun SR upgrades for high printing speeds are bimetal hotend, original…
Nice Prototyping board for Raspberry PI b, b+, 2,3,3+ Print Settings Printer: Sparkcube Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 20 - 40 % Category: Electronics
![Telebox--Heart Telemetry Simulation Tool [with Clipping Leads]](https://media.printables.com/media/prints/30278/images/301017_4f9104b0-c541-4711-99d9-ba57f18c9180/telebox-5-lead-v3.png)
