Counting matching models…
If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports
When you want to replace your tyre on, for instance, your motor Cycle you want to protect your rim. Rim Shiels or Protectors are the things to use! Print with heavy fill in! (like 80%) Print on the side! (The stl should be in the right…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! HTV Tool for precisely placing heat-transfer-vinyl onto shirts. Check out my bigger paid-but-affordable models at…
I used these tools to replace the 6 pairs of bearings in my mountain bike suspension. You can buy the specialised tools to do this but I wanted to see if it was possible using my own 3D printed tools. The rear suspension triangle started…
A game inspired by the MacMahon squares, a puzzle published by Percy MacMahon in 1921. In its original version, the game consists of 24 unique three-coloured square tiles which must be placed on a 6x4 board in a way such that all adjacent…
I designed this to help angle my preamp, so that it was easier to see and adjust while I work or play games. Simply place and press the bottom of your preamp onto the stand. The bottom of the preamp should fit perfectly into the stand.…
You want to simply improve the WiFi reception of your Prusa Core One ? you're at the right place ! Prusa Core One Wi-Fi module Back-Cover + Stand or Magnetic My Prusa Core One couldn't catch the Wi-Fi signal in my cellar, so I moved the…
Printer : Prusa I3 MK3S+ Layer height : 0.2 No support needed Infill : as you like
A tool for placing magnets so that they are always the right way around. Uses a pair of 10x3mm magnets.
Surfaces must be perfectly smooth. One mandrel for ring expansion, the second mandrel for ring compression. Filament material: COPET Resolution: 0.2mm
The Designs Goal was to to keep the Pack inside the Footprint of an Standard Acid Car Battery. Readymade Packs are always to tall to fit in one of the Batterystorages under the Front Seating of my VW T3. For the outer Framing use 10mm…
This is a simple mount adapter intended to allow for a (somewhat) drop-in-replacement of a 4020 blower-style fan with a 5015 blower-style fan. In my case, this 5015 fan was replacing a dying 4020 fan used to cool the mainboard in the…
Die Spike-länge habe ich auf 11cm Länge und den Durchmesser für die Stange auf 2,2cm mit dem Slicer verändert. Zusätzlich habe ich einen Einsatz mit 18mm Durchmesser für die Stange erstellt. Der Einsatz wird mit einer Schraube 3 x 25 mm…
This is a very basic wedge design with a 6.5mm gap to allow you to get under the knob and push the wedge forward to move the knob cap upward so it can be pulled off more easily for those who are not strong enough to manually pull the cap…
The stock fans in the DeskPi Super6C case are very loud. These stock fans can be replaced with 40mm Noctua low-noise fans. However, the same screws that mount the stock fans are smaller than the mounting holes on the Noctua fans. A…
I found some similar tools, which were too “complex” for my requirements so I made this new one. Just insert two 6x3 or 5x3 magnets while pausing the print at the appropriate layers. I recommend to glue them in, so the printhead doesn't…
The connection box fits the bottom mounting holes of part: 'prusa_mmu_enclosure_11_black.3mf' in the Prusa Enclosure V2 – MMU2S package ( https://www.printables.com/model/3673-mmu2s-enclosure/files ). The cover fits snuggly over the…
Use the one with 2 holes if you want to use doubbe sided tape. Turn 180 before printing. Printed with MK4 0.2 Input shaper.
A simple cosmetic cover instead of the original hard disk cage for the be quiet! Pure Base 500DX Midi ATX case. I personally don't use 3.5" drives anymore but I don't like having a void in the bottom panel above the PSU. You ccould simply…
Adapter bracket to install a BigTreeTech SKR v1.4 and optional MOSFET in the Wanhao Duplicator I3 using the welded-in mounting bosses intended for the stock Melzi board. Note that the USB and SD ports do not line up with the original…
Replacement for a worn out Sigenia TL860 Balcony Door latch. Print instructions Best print out of a very sturdy material with 100% infill to withstand the forces of the door closing.
no support printing required. 香港政府唔保護市民, 我地唯有靠自己!!!!! 新加"光復香港 時代革命" version (202002A_3M_Hand_Cap_Free_HK.STL) 新加"香港加油" version (202002A_3M_Hand_Cap_add_oil.STL) 新加潮流野, "3萬Thx" version (202002A_3M_Hand_Cap_30k_thx.STL) SW Multimedia…
Replacing part for the cental lid on a BEKEN Blender
I was worried that I would loose the key of my cash register (german: Geldkassette) so I printed a replacement lock that does not requre a key. The parts are designed so they fit together snugly. If you notice that the two inner parts are…
This is a model of a umbrella tip replacing Whitworth thread is 1/4 ". It is the thread used at tripods cameras. You can check if your umbrella thread has that as compared with a tripod screw. If you have not fan layer, it is better to…
I created the Banjo Arm Rest for my banjo. Usually it is made from wood but I tried 3D printed version. Two parts are connected together with 3 pegs and can be fixed by some glue.
If You need to replace an 14,4V SUB-C cell package, this spacer may help. 14,4V means 12 cells. Each NiCd with 1,2V in normal use. BUT the first mAh, the cell provides 1,5V. (NimH is also close to 1,55V) So 12cells*1,5V=18V … The tool…
Turn screws that are hard / impossible to reach with a regular screwdriver or with the reverse hex bit screwdriver with offset. I remixed the Reverse hex bit screwdriver with offset because I needed a similar tool working with offset but…
Redid the entire thread and kept the same design from the POSITIVE so that we can reuse the LID
The original plastic part has a large backlash and is attached by self-tapping screw, which also over time loosens. There are two holes on the steering wheel to attach the plastic part, the regular one is attached only at the bottom. The…
Replacing pat for Korum Speed fit tripod adaptor Speedfit Tripod Adaptor . Printed from PETG and reused original screw from broken parts.
A simple board for placing Triomino. The template is the game, as can be seen in the picture. For comparison: The game piece has a height of approximately 32.6 mm and a wall thickness of 1.66 mm.
I need to replace the brass brush in my VORON that I currently having issue with. the brass wires on the scrubber was dislodge on to the print bed as it getting old and ruin my print bed. after came across other model here I borrow they…
ANTE Level Ruler replacing side cap piece
I had to replace the motor in my Choueer Choubox Litterbox after it failed. I found these https://www.amazon.com/gp/product/B07F8WDFZV (NOT a sponsored link) which go a little slower than the stock ones, and appear to be compatible. I did…
TEM ID: BLM-PWR-AAA20500 CLASS: Energy Transmutation Device GENERATION: Post-Steam Revival Mk.I MAKER: Black-Lotos9758 Energy Artifact: “AAA→20500 Converter” ⚙ PURPOSE Energy rebirth. The artifact allows you to use an analogue of 20500…
I bought indoor electronic TV antenna. It was china made product with case from poor material. When the case was broken but antenna still working I decided to try replace it with 3D printed one. It was little bit complicated because all…
dimensions in blender are 65x65x40 (mm) print at a 45 degree angle from baseplate for increased strength and durability, reccomended to use petg fillament. will need splicing yourself.
Hello to everyone! I really don't know how I can name this part, so suggestions would be welcome! But I can describe for what I used this part. Some time ago I broke my tablet screen, and the replacement quality wasn't good. Because of…
Add this badge to your Core ONE to commemorate replacing the main cable, in your choice of MAIN CABLE or HLAVNÍ KABEL. The hard part of adding this skin to your Core ONE is the work on the inside. Background: I had to replace the main…
Basic case to hold a battery charger and battery, + clamps. Tired of AAA batteries try this. Like if you use it! This motivate me!! Thanks!
I need to mount this little light to my Mudhugger rear mudguard so I made this model. v2 is here: https://www.printables.com/model/1751103-supernova-e3-tail-k915-mount-v2-for-50mm-placing Get v1 if you want to print it easier and get v2…
This is v2 of my Supernova tail light. Absolutely different geometry for mount your light on flat surface. v1 is here: https://www.printables.com/model/1750523-supernova-e3-tail-k915-mount-v1-for-50mm-placing Get v1 if you want to print…
When replacing the backlight LEDs on an LCD screen, you first have to remove the back of the TV to disconnect the panel. After that, you need to lay it flat on its back in order to remove the screen. With these stands, you can place the…
You want to simply improve the WiFi reception of your Prusa Core One ? you're at the right place ! Prusa Core One Wi-Fi module Back-Cover + Stand or Magnetic My Prusa Core One couldn't catch the Wi-Fi signal in my cellar, so I moved the…
TEM ID: BLM-PWR-AAA20500 CLASS: Energy Transmutation Device GENERATION: Post-Steam Revival Mk.I MAKER: Black-Lotos9758 Energy Artifact: “AAA→20500 Converter” ⚙ PURPOSE Energy rebirth. The artifact allows you to use an analogue of 20500…
I used these tools to replace the 6 pairs of bearings in my mountain bike suspension. You can buy the specialised tools to do this but I wanted to see if it was possible using my own 3D printed tools. The rear suspension triangle started…
just for 3D models or other things in these square box's
With my design the printing area is in the isolated warm box (when printing with PLA 190°C/60°C, the internal temperature keeps at 37-38°C), while all electronics (ZRIB motherboard, AC/DC converters, OrangePiZero) are in the external…
Template for making DYI clock faces, from 50mm to 250mm diameter, with holes for marking places for hour markers. ( this is printable in BambuLab 256x256 bed size)
