Counting matching models…
PMDG B737 Trim Wheel for Flightsimulator. This trim wheel can be combined with the Logitech/Saitek Throttle Quadrant possibly supplemented with Speed Brake Unit. The communication with FSX / MSFS is done by FSUIPC and a LUA program to the…
While I liked the original model to hold my Bosch PMD7 - which is apparently also labeled Truvo sometimes - I'm really no fan of the T-Nuts used in the original model, because it requires additional hardware. Thus I prefer the Universal…
Our muncipality recently switched to collection of PMD trash in bags. To prevent them blowing into the street, I made a hook that I can ty-wrap to a lamp post. The rear follows the curvature of the lamp post. Best printed in something…
These hooks can be used in combination with 5mm wide tyraps. The tyrap can be put through the hooks and then the tyrap can be attached to, for example, a lamppost. We use it to hang our plastic waste as you can see in the pictures. I've…
Update 05/24: I saw that one of the 2 hooks i put up had snapped off on the horizontal part. Not sure if it happened during garbage pickup or just vandalism but i made a chonkier version just in case, now also uploaded. Hooks for hanging…
This endstop spacer will help you place the endstops of a Monoprice Mini Delta Printer at an identical position. Use the same endstop spacer for all 3 towers to avoid inconsistencies which you are trying to avoid by using this item. If…
Why another set of feet? Wait? Shoes for feet? wtf is going on? I recently printed the "Monoprice Mini Delta Feet Replacement" by 3Dgoon in PLA, as I didn't have Flex Filament yet. Now that I have some TPU 55D, I kinda liked the look of…
I love all the Bearing Spool Holders. They allow smoother feed of filament. After printing this model, I found that the Inland spools did not fit on the new spool holder. So if simple increased the angle at the end and set it lower on the…
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
This is the ALTN Pitch Trim Lever for the PMDG 777-300ER MSFS 2020. Made for the Thrustmaster Bravo Throttle Quadrant. Fits great works great, enjoy.
This is to hold a 5" mirror from Hobby Lobby ( https://www.hobbylobby.com/Crafts-Hobbies/Glass-Crafting/Mirrors/Round-Craft-Mirrors---5%22/p/22814 ) to a Monoprice Mini Delta Printer. I made it customizable though, so feel free to use the…
Thanks to ksihota for the measurements. I made mine 20mm tall, 1.6mm thick in most places, 0.8mm on the ends. MPMD shield. Check out my enclosure as well, they work together perfectly. Category: 3D Printer Accessories
So I've decided to change the linear bearings on my MP Mini Delta to LME8UUs. Those have a diameter of 16mm instead of the usual 15mm on the LM8UUs, so I needed new carriages. I've decided to model them up from scratch myself, and they…
Remixed base to fit on Monoprice mini delta bed Ø110mm. Category: Tools
What's this? This is a new extruder top for the Monoprice Mini Delta (MPMD), which is aimed at printing flexible filaments. does it work? I've been successfully printing TPU with shore-hardness of 55D, at a speed of 20mm/s (mk1) - 30mm/s…
Slip this on top of the Monoprice Mini Delta Printer and put a spool on top. Category: 3D Printer Accessories
Sized to use the spec power supply and inlet from a Voron V0.1 and has mounting for an SKR pico control board or raspberry pi.
This is my take on a compact top mounted spool holder for the Monoprice mini delta. It uses the 4 holes for the handle as the mounting point. I personally used the original screws, but I included a printable friction fit pin to use in…
Requires M2 screws to attach switch to adapter and uses original screws/nuts to printer. No loss in useable height. I connected wires to C and NC using a 5 pin JST-xh connector. Only tested on a V1 mini delta but I don't see why it…
Description This is a side product of my top plate for flexible filament for the MPMD , basically the mk3's mount solution as a stand-alone. I have the PTFE tube jump every now and then when printing non-flex filaments with Spconnol's…
Print 3, glue to 140mm glass disc, attach heater. https://www.amazon.com/gp/product/B077S4C3PL/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/38icEx0YRI4 Category: 3D Printing
wider, better, stronger, nicer. Heavy print AF. Category: Hobby
for installing the walls is required m3 nuts and m3x10 screws
A Duet2Wifi borad mount for the Monoprice Mini Delta. Uses the original board's mount holes.
A clean simple caddy for all of your MP Mini Delta's printer tools. Including: Scraper 3 Hex Keys SD Card Case USB Cable Fits neatly behind top handle. I attached with hook and loop, but not mandatory. Caddy is labeled with machine name…
Gridfinity 2x1x4 for two pmd flexx 3d lidar
While I liked the original model to hold my Bosch PMD7 - which is apparently also labeled Truvo sometimes - I'm really no fan of the T-Nuts used in the original model, because it requires additional hardware. Thus I prefer the Universal…
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
(This is a work in progress. I will update this description later on). Links to 3D models that I used as part of my build but that I did not design or modify: Vertical bearing holders: https://www.thingiverse.com/thing:3731117
I bought this printer mainly to use as a self-education tool. One of the things on my list was to redraw it in CAD to learn how delta printers work and then make a few personalized upgrades. So I took it all apart and plan to put it all…
This is a tight fit, and gives you space on the one side to screw in the mini satsana shroud I'm using. I'll post pics soon. Print in 100% fill with something heat resistant that won't crack after repeated heat exposure. I recommend ABS,…
New bottom plate with 80mm fan & riser feet for better cooling. I used an Arctic Silent F8TC with temp. sensor and the MPMD stays stable at 30°C. But any other 80mm silent 12V will do as well. I run Arctic Silent F8 fans on my Ender 3…
BOM (1) arm from a 15mm binder clip (1) m3 bolt (<6mm preferred but if they are longer they can just run down the original clip holes (2+) 3/8" x ¼" neodymium magnets (Glue them in or they'll inevitably jump out) Bed Clip Alignment Remove…
I wasn't really happy with the existing holders for the Bosch Truvo digital detector, so I came up with my own. It holds the Truvo fairly snuggly but it still is easily removed or inserted. I used the M2.5 variant of the T-Nuts for Ikea…
I designed this foots in order to make the MPMD a little bit quieter and fresh. Need to be printed in flexible material. 3 perimeters, 30% rectilinear infill. Is suspossed to be in position with the stock foots of the printer without…
I have all my printers runing with octoprint and my new MonoPrice Mini Delta is joining the club. But I need something to keep the raspberry pi and the printer in one single body. Also, wanna try the new raspberry 3 model A. So I searched…
I replaced the 5A PSU with a 10A Meanwell one, which I mounted to the back, which got in the way of the included filament holder. I designed this to use the existing screws from the top handle and holes, while also adding in a filament…
My take on the binder clip bed retainer and tower shield for MPMD. M2.5 heat set inserts installed in the 2b part then gets installed under the platform. Tight fit to get between motor and the plate but it fits. M3 heat set insert for the…
The missing part to raise your MPMD off the ground and allow more air to cool the controller. It does a great deal to silence the fan and the flex filament will allow for some vibration absorption. I used some double sided tape to…
Found the following button on Amazon for LED strip control and wanted to add it to my mini delta. https://www.amazon.com/gp/product/B01C4BFH7I/ref=oh\_aui\_detailpage\_o01\_s00?ie=UTF8&psc=1 Modified dcpdx's remix to house the button.…
