Counting matching models…
This is a case for the awesome Portapack H2. The Portapack from ShareBrained is an add-on for the HackRF. The HackRF from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals…
This stand has been designed to fit the new HackRF Portapack H4M but it will also fit H2M and other thin H2 models. You can charge your portapack while it's in this stand, as there is room to fit the cable through the hole in the back,…
This is a case designed for the PortaPack H4 & H4M https://github.com/portapack-mayhem/mayhem-firmware/wiki/PortaPack-Versions#new-h4m-mayhem-edition Originally based off of https://www.thingiverse.com/thing:4260973, but updated for the…
Remix of the rugged box for the H4M Portapack. Uses the original foam that the device comes with. Make sure to print 2x of the latches. Uses six M3x30 screws. Attached are also blank lids if you would like to add your own logo. Excellent…
UPDATED: New mount with tighter fit Infill: 100% I used double-sided tape to attach the pen-mount to the portapack.
When I put the portapack in my pocket, I turned it on every time. This is my solution for this problem. HackRF and portapach are great! https://greatscottgadgets.com/hackrf/ https://github.com/eried/portapack-mayhem
This cover protects the screen and the buttons of your Portapack H2. Designed for the case I made. Just print and glue the magnets in place. They should protude slightly. The revisited version is the white one from the photos. Since is…
This is the ultimate HackRF H4M case with many improvements: Designed for 3d printing, with larger tolerances than the original case (which was made for injection molding with very tight tolerances) Added EXT - MIC and ON - OFF text on…
Encoder dial in Portapack H4M is far from perfect. This little add-on improves scrolling experience a lot. It is slimmer that the wheel made by @Farlei and does not restrict access to directional buttons as much. I printed mine on…
the TPU feet are optional and can be glued in. the design also has a recesses for the speaker and Uses M3x5 screws to be put together also included is the hole pattern DXF and the STEP file produced form fusion 360
This is a medium height stand for the HackRF H4M Portapack. Most right-angled USB cables will fit. There are 4 versions: Stylus holder only MDK cutout only Stylus holder and MDK cutout (recommended) No stylus holder and no MDK cutout I…
I couldn't find a stand for the big alu version of the portapack case, so I made this one. It's quite simple but it is also my first 3D design.
The original case does not feature a space to put a larger battery or a speaker. I added this to the lower part of the case.
It spreads the tension of big/heavy antennas (W100RX2 added since its a great antenna and i have it now) away from the SMA onto the case. I got inspired by https://www.reddit.com/r/hackrf/comments/1l9c72m/hackrf_h4m_antenna_mod/ .
Here is a stand for the Portapack that doesn't block access to the charging and audio connectors on the bottom, and doesn't obscure the writing on the front. I printed with 15% infill, skirt but no brim. Supports are required. Please…
This is a 2mm add-on for the H4M scroll wheel with an extra grip texture. I printed it in PLA with 0.1mm Fast Detail in the MK4S. No supports needed. Should work with 0.2mm. But the texture could be affected. The add-on will make tapping…
Smaller knob for Portapack, makes it easier to both navigate and see battery status LEDs 100% infill if material is transparent
Recommended print settings: Wall: 3-4 loops Infill: 20% gyroid Ps: will NOT fit if you have a metal enclosure!
made bottom opening larger to accomodate SMA knurled cap(https://www.printables.com/model/784000-threaded-sma-connector-knurled-caps-fpv-drones-hac) and charging cable. slightly tighter fit in lengthwise.
Enhance your HackRF One Portapack Mayhem with this collection of 3D-printable add-ons, designed for both protection and improved usability. This set includes: Small Buttons – Custom replacement buttons for better tactile feedback. Knob &…
This is a slightly narrower face plate for the travel cover by Snp93. Fits over the clear plastic case on my H2+. Uses the same travel cap from https://www.thingiverse.com/thing:5029645/files Example photo was printed with 20% honeycomb…
HackRF One & PortaPackH2 ( (OpenSourceSDR Lab version) stand with slot for USB charging cable. Fusion and step CAD files available.
easy print with PLA 0.2 mm and don't use support, because it's not necessary.
This is a strap to hold the ANT500 antenna to your portapack, so that you don't have parts flappin' in the breeze or tumbling around in a bag. Printed in TPU so it can stretch and flex around the outside of the case.
This model is very similar to my flipper dock. It uses the same 10mm 5-pin magnetic usbC cable. Unfortunately, you will probably need supports for this model, unless you have a printer that does really well with overhangs. My FDE/BLACK…
After putting your hackRF into a shiney new PortaPack, where do you put your PortaPack? On your Honeycomb storage wall - that's where! This model holds the PortaPack plus the standard SMA antenna. Print in natural orientation. No supports…
This is a tall stand for the HackRF H4M Portapack. most USB cables will fit, and clock cables if they aren't too stiff. There are 4 versions: Stylus holder only MDK cutout only Stylus holder and MDK cutout (recommended) No stylus holder…
A smaller knob than original one , with transparent base, so you can see the 4 status leds. Just add a M600 or a filamement change in your slicer. It is inspired by the model of @Nother_ngineer on Thingiverse :…
This cover straps around your HackRFOne Portapack (in the plastic case) to securely protect the encoder and navigation buttons, and the screen from getting into any mischief when tossed into a bag or a backpack. You can use a velcro wrap…
This is the ultimate HackRF H4M case with many improvements: Designed for 3d printing, with larger tolerances than the original case (which was made for injection molding with very tight tolerances) Powered by a replaceable 18650 Li-ion…
Wanted a top plate for my portapack. This also puts bumpers on the sides of the display, hopefully keeping something from cracking the screen. Oh! Just noticed it's sitting up on edge. Lay it down flat so you can actually print it! Though…
This is a short stand for the HackRF H4M Portapack with the clock connectors removed. A right-angled USB cable will still fit if it's not too bulky. There are 4 versions: Stylus holder only MDK cutout only Stylus holder and MDK cutout…
This is a case I made a few years and now I uploaded to printables! Its just a case for the portapack.
This is my version of a HackRF PortaPack H2+ mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without…
Missing front panel for HackRF PortaPack H2+ aluminum alloy case.
Additional protective mask for Portapack. Print instructions Category: Electronics
This case fits a PortapackH2M, a HackRF, and a small speaker. For the attached files I wanted a radio that I could set down, and didn't care about the 10 MHz reference in/out, so I removed those connectors from the board to fit in this…
A mounting plate for theHackRF One PortaPack H2 that attaches to the lid of the Peli 1040 case, allowing for the device to be secured within the pelican without accidental button presses.
Stand for Portapack H2 Hack RF
I printed this in Prusament PETG at 100% infill using the textured plate. I have also included the original version I designed without the speaker.
Because I couldn’t find any case design for this electronic component, I modeled one myself. To be honest, I’m not sure if it will fit other units as well, since their manufacturing process is not very precise, and the parts will not be…
H4Mの4方向キートップの交換パーツ。 レイヤ高さ0.2mm、PETGで出力しました。 オリジナルのキートップを外すためにはバッテリーを取り除いて、固定ピンを外す必要がある。無理やり外すとピンが折れて復旧できなくなる。 その際に使用する代替部品。space ringの高さでケースとの隙間を調整する。 keytop space-ring base の順で重ねる。 キートップは刻印の有無で選択してください。
Made the original model a little thinner. Deleted the side features (stylus and antenna holders).
This is a holder designed for the HackRF PortaPack. It provides a stable, angled position for comfortable desktop use while letting you demonstrate what a cool hacker you are! The model requires no supports, uses low amount of filament…
If you carry your HackRF + PortaPack H4M in a backpack or case, the touchscreen and the main rotary button are the first things to take a hit — and those two most vulnerable parts are exactly what this cover protects. It follows the exact…
Desk stand/dock for the PortaPack H4M, portrait orientation with a 15° tilt. The device rests on the case corners only — protruding SMA connectors, USB-C and attached caps hang freely in an open slot. Cable hook at the back. Supports only…
I designed this housing so that you don't accidentally switch the HackRF on or off when traveling. This means you can carry the HackRF in your backpack, for example, without damaging the buttons or changing the settings.
The MDK is a cool add on for the HackRF Portapack, but a bit delicate for the field. This minimalist case protects the board, and goes together with just filament stuffed in the corners.
Front cover for PortaPack H2. It protects the screen but its main use is to prevent the knob from pressing and turning on the device during transport. Be aware that there are multiple versions of the PortaPack hardware/cases. This cover…
When "whacked" or "struck" from the side, this spreads the load across a much wider area of the top cover... HOPEFULLY saving me from a broken case! BNC-Female to SMA-Male adapter and Comet BNC-W100RX antenna This version can be TIGHT,…
When "whacked" or "struck" from the side, this spreads the load across a much wider area of the top cover... HOPEFULLY saving me from a broken case! BNC-Female to SMA-Male adapter and Comet BNC-W100RX antenna This version can be TIGHT,…
