Counting matching models…
This stand holds 30 16.5mm diameter POSCA markers. Holder conveniently angles the markers easy selection and quick stowing. No supports required as long as you have good adhesion. Brim is recommended. Minimal manual support in the middle…
If you want to hold paintbrushes or colored pencils, I recommend the Cubistand from sdmc : http://www.thingiverse.com/thing:1294085 I use it for my brushes and it was a great inspiration for me. Here is 3 different marker stands, for…
Posca Marker Stand (3x7 and 2x5) Designed for Uni POSCA PC-1M markers Fits also Crayola Ultra-Clean washable markers Recommended print options: place upright with brim 15% lightning in-fill to save filament and remain lightweight enable…
Pretty basic adapter to fit Posca pens in the cricut pen holders.
Printing in normal orientation works great as long as you have good adhesion. No supports required. Brim recommended just in case. I have included 3mf for painted seams and backwards orientation with rear seam alignment to minimize seam…
Recommend increasing size by 2%, fit it quite snug
Everybody seems nuts for POSCA™ paint markers/pens, so I got myself a set. I liked them so much that I bought two more sets so I had more sizes. But then I wanted a nice box to store and organize them in. It has room for 15 PC-5M, 18…
Everybody seems nuts for POSCA™ paint markers/pens, so I got myself a set. I liked them so much that I bought two more sets so I had more sizes. But then I wanted a nice box to store and organize them in.
3mf included with a painted seam. model oriented backwards to hide internal seam when using “Rear” ream alignment. Brim recommended just in case, as the overhang is 60º. No supports required.
These models were made with the base template for the Gridfininty bins. I used Fusion360 to make them. I couldn't find bins already made so I decided to take a swing at it and make my own. I'm really happy with the outcome. There are no…
This is a holder for 21 PC-1M Posca Markers. It holds them cap down to keep them from drying out and I liked it better that way. I've included versions with and without hooks for use on the IKEA Skadis pegboard. The walls are pretty thin,…
It's a marker holder! Specifically for 1.8mm - 2.5mm Posca markers, but can probably work for a bunch of different kinds of markers. Also works for smaller Posca markers. Print it Put markers in it. ?????? ART! Can probably print it with…
This pen holder is for the Posca Paint Marker, the holes are 16mm and it fits 16 pins. I opted for a closed foot because nothing wobbles and it stands stable, the pins are easier to recognize by the height difference and the angles a lot…
Posca Markers Holders. Quick and easy to print Keep the tip down to avoid tip drying Viewable cap for easy colour selection Actualy available marker size : Posca PC-1MR Posca PC-5M /!\ if you need other Posca marker size, feel free to…
Support 8 feutres POSCA PC8K pour pegboard SKADIS IKEA Longueur : 215 mm Largeur : 30 mm Hauteur : 42 mm PLA/PETG Infil: 15% Support pour les crochets N'hésitez pas à me laisser un commentaire, ou poser une question.
I needed a stand for my Posca markers and I could only find (Posca PC-1M Marker Stand) but I had a PC-5M so I enlarged it to fit :-). Play around with the padding and all, but I wanted some weight to it so it wouldn't tip over. Open to…
Sized to fit a PC-5M Posca and similar sized markers.
I didn't find it was good to store my posca pens vertically with tip down, they had an habbit to leak a bit when I used them, so I started to store them horizontally, ie, laying around everywere on my desk. Finally I made this to have…
Estoy en proceso de ordenar mi espacio de trabajo el cual es medio un caos y tenia mi set de 12 marcadores Posca PC-1M en su empaque original pero no destacaban. Decidi modelar una suerte de exhibidor con el logo y como quedo decente, lo…
I needed a stand for my Posca Markers and didn't find one for the PC-1M, plus I am not a 3D Designer, so it is rough. Made in Tinkercad, but I will make a better one also for the other sizes I use. (also fits the PC-3m and thinner Posca…
El soporte para rotuladores Posca impreso en 3D y diseñado con Fusion 360 es un accesorio versátil y personalizable que te permite organizar tus rotuladores Posca de manera eficiente. Fusion 360 es un software de diseño asistido por…
This is a custom box made to hold the paint makers I bought on Amazon: https://www.amazon.com/dp/B06ZYKRQJQ?psc=1&ref=ppx_yo2ov_dt_b_product_details These are the Uni Posca Paint Markers which are great for adding color to 3d prints. The…
That's a simple Posca Marker Stand for the 0.7mm marker version.
FR Support verrouillable pour marqueur acrylique POSCA Support jumelable en longueur ou en dos à dos STL: 1- Corps 2- Glissière verrou 3- Jumeleur 4- Bouchon 8- Support mural vissable ou magnétique Pas de vis pas de colle pour assembler…
2 versions disponibles avec et sans étiquette
This holder stores up to nine Copic Ciao and Posca PC-3M pens or pens with similar sizes like Edding 400. The idea is to presort a set of pens and colors from the big storage which are actually needed for the current art project. Keeping…
This holder is designed specifically for POSCA PC-5M markers and holds up to 10 markers. It mounts on a multiboard and keeps your markers neatly organized and easy to access. Capacity: 10 POSCA PC-5M markers Upright storage Multiboard…
Introduction I wanted a box for Posca markers, but didn't like any that already existed. So I made my own. Advantages of my design: Parametric: as many markers, or as few, as you need. Also allows tolerance adjustments. Can be positioned…
The bigger holes can fit the larger Posca Markers. It can also fit the medium Posca markers. The smaller holes can fit the smaller Posca markers. As you can see, my wife also uses it to put in a couple paint brushes, and she can also fit…
possssssccccaaaaaaaaaaaa
I designed this for a birthday gift after accidentally ordering 15 Posca pens instead of 16 (one 8-pack and 7 loose pens). Because of this odd number, I made the design fully parametric—it will automatically calculate the best layout and…
A small organizer for holding Posca acrylic paint pens. I made it to hold 10 normal size and one large as that's what I had/ could fit in the Skadis holder.
This Posca marker stand is designed for artists who want clean, functional storage without wasting desk space. It holds 30 Posca markers — 20 PC-5M and 10 PC-8K — with precision-sized slots for a perfect fit. Each slot stores your markers…
This tray is for your Gridfinity storage systems. It was made to fit the Posca PC-5M markers, but other ones might fit.
Il PORTAPOSCA è un porta pennarelli per la famosa marca uniPOSCA realizzato in PLA può contenere fino a sei pennarelli, due per diverse misure in commercio: PC-M5 Bullet shape 1.8-2.5 mm PC-M1 Bullet shape 0.7 mm PC-MR pin type 0.7 mm…
This model was made after I was looking through the posca stand models and none of them really gave me the inspiration to print them. I have lost the original 360 file so if your name is Elliot then this is for you!
I was tired of having my pens in the box they came in and couldnt find any model that fit my needs, so i modeled this container for them, made as a direct copy of the box that the 16 pack of markers comes in. The lid isnt firmly attached…
Recommended 3D Printing Profile (Optimized for FDM Printers) Since this model relies on stacking multiple interlocking units, keeping your printer calibrated will ensure the pin-and-hole locking mechanisms slide together easily. • Machine…
I made this to hold my posca pens since I couldn't find any models that would hold multiple different sizes of posca pens. This model perfectly fits up to 6 1m pens, 20 5m pens, and 3 of the large 17k chisel tip markers. I printed with…
Designed so that the mount can easily be attached to the Extruder (remove the fan first though). Mount can be secured with the springs of the Fan. Hole Diameter: 16.3mm
The is a medullar Posca Marker caddy for medium and extra fine tip markers with a slot for Citadel paint jar. Easy to print. I print the model with its side, holes down.
Concept de designCe pot à stylos est conçu pour organiser et embellir votre espace de travail avec une touche de couleur et de personnalisation. ## Utilisation Idéal pour maintenir vos stylos, marqueurs ou autres articles de papeterie…
