Counting matching models…
Dell Poweredge 2.5" caddy for R430, R630, R730, R730XD, and T630. Prints well with PLA, but I do recommend using PETG. Please note the screenshot where support is required. It can be made pretty easy in PrusaSlicer or other slicing…
added some air holes, and changed screw spacing from 76mm to 77mm. Category: Computer
This is a functional replica of the Dell G13 server drive caddy (model F238F ) designed for 3.5" LFF hard drives . Precision Tolerances – The screw heads for drive mounting must not exceed 1.25mm in height (use M3 screws ). Modular Design…
A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…
Update model to use new v2.0 backplane Now supports DELL PowerEdge Caddys (P/N F238F) Dimensions: 40x119x190mm With DELL Tray 40x119x167mm With Low CoolerMaster Profile Rails
Dell PowerEdge R720 3.5'' Disk Tray with 2.5'' Disk Adapter This model is designed to accommodate 3.5'' disk bays in Dell R720 servers. The model also has 3.5'' to 2.5'' disk converter adapter. So, yo can use any 3.5'' or 2.5'' disk with…
Can print without supports. One side has small nubbins to slot into the caddy's 3.5-inch screw holes. The other side screws into the 2.5-inch drive. On the opposite side of the caddy you can use the caddy's own screw holes to screw in the…
Dell PowerEdge R610 R710 SFF 2.5 Inch HDD Tray
Originally uploaded on Thingiverse before Printables was a thing. I have a T310 that needed to have a couple of drives added so I did my best to make a quick drive caddy so I could make that happen with some SATA drives I had laying…
This is a replacement logo for the g11-12-13 Dell PowerEdge servers. Print instructions Category: Computer Summary This is a replacement logo for the g11-12-13 Dell PowerEdge servers. Print Settings Printer Brand: FlashForge Printer:…
I 3d Scanned the 2.5-inch drive blank to get the locking part, cleaned it up, and remixed https://www.thingiverse.com/thing:4866109 for the SDD drive caddy. I merged them together and got this as the final product. It slides right into…
While hole spacing is consistent on both sides, I found that other dell caddies didn't work due to the shorter left side of the caddy. Recreated adcurtin's caddy design incorporating the different dimensions. Recommend printing in PETG…
An adapter for 2.5" drives for a 3.5" caddy. Should be compatible with: * PowerEdge R310, R320, R410, R415, R510, R515, R710 * PowerEdge R320, R420, R520, R720, R720xd * PowerEdge R630, R730, R730XD * PowerEdge R740 I've attached the…
designed these to be easily removable for a drive wiping setup. first drive caddy design. includes holes for light pipes. equavalent to 18KYH & G176J caddies.
A shorter version of the drive carrier so that the server cover can be reinstalled. It fits 2.5" drives and can be installed in Dell PowerEdge servers.
3.5 Caddies designed to fit Dell PowerEdge and EqualLogic servers. these may also fit some Precision computers. sorry no interposer caddies yet. they will need to be rotated to be flat to the print bed. supports will be required for the…
For printing instructions see original model
If you are reading this chances are that you are the owner of a Dell PowerEdge T30 server, of which you have removed the optical drive for the purpose of installing a 2.5'' drive. If that’s the case, you’re probably aware of the hole that…
I had one of the feet on my Poweredge T420 break off when moving it, so I designed this model to replace it. Might also fit the following models: T320 T340 T430 T440 T620 T630 T640 I haven't tested it, but they look similar I'm not 100%…
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
I created this fan bracket for my Dell PowerEdge T440 server. Since I'm not using it in a rack it was lacking a lot of airflow to the PCIE cards. I was using zip ties but that wasn't a long term solution
Give your homelab a clean, professional look! This 3D printed insert snaps into the hexagonal front grill of Dell PowerEdge servers and displays the name of the service running on the machine — perfect for quickly identifying servers in…
Simple replacement foot for Dell PowerEdge T320, T420, and T640 server. Might be compatible with other models but I just have those three to verify. Other possible compatible models are T620 T630 T430 T440 T330 T340. You will need a fine…
This a replacement latch for a Dell Poweredge disk tray. I printed this in PETG using a 0.2 mm nozzle on my Sidewinder X3 and it turned out great. Make sure to enable support for the bottom face.
The Dell T330 has a custom tray in two or more of the 5.25" bays, this tray is smaller than a standard CD/DVD drive and can not use a standard adapter to take a 2.5" drive. This adapter allows a 2.5" drive to be mounted in one of these…
Two versions of a ball mount cover for the mouse ball in Dell PowerEdge 15FP rack console.
Bought a server with the optical drive missing, given its limited use anyway I created this blanking plate with airflow holes to make it look slightly neater. Fits flush to front and presses against a metal plate in the server to hold it…
Solves a problem only I have
I wanted to keep my drives cool, maybe you do too. Zip tie to secure (you can find some to print).
Small spacers to firmly hold hard drives in the internal caddies for the Dell PowerEdge R220 server.
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
Can print without supports. One side has small nubbins to slot into the caddy's 3.5-inch screw holes. The other side screws into the 2.5-inch drive. On the opposite side of the caddy you can use the caddy's own screw holes to screw in the…
