Counting matching models…
UPDATE 09.01.2023: I created a stronger version for heavier tools and with an extension on the left to better handle forces from one side (for the extension on the right just mirror the model in your slicer). I have also included the…
20mm MFT benchdog for 150mm one handed clamps from Lidl. Use M6 headless screw to secure the dog on the clamp. Printed without supports.
Modifications on the original Hexagonal sscrewdriver holder: reinforced the center part to make it more robust added pegs for the 38mm Lidl Powerfix pegboard Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
I thought it would be good to have a few "base" parts for further development of holders for the Lidl Powerfix pegboard, so I remixed a part, and created these configurations: single peg, horizontal base 2 pegs, horizontal base 2 pegs,…
These holders are designed for Parkside / Powerfix hex and torx wrenches found at Lidl but they may fit other generic models. The supports are robust and do not tip over easily. Print on one side like in the picture and use a moderate…
I liked the original design, but it lacked the pegs going into the slots, so remixed it with my pegboard toolkit's 2 peg base. I also slimmed it down a bit in places. The downside is that printing this one requires supports... Enjoy!…
Replacement for broken Powerfix clamp trigger. Easy to print. I used PETG and 0,2 with automatic support Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15 Filament: Prusament PETG…
I broke the paw on the Powerfix clamp from Lidl. This is a substitute. Sk: Zlomil som packu na zvierke Powerfix z Lidlu. Toto je nahrada. Print instructions Unassociated tags: Broken Clamp Repair , Clamp Powerfix, handle Powerfix Print…
Designed a cap for Powerfix's caulking gun. Suggested printing settings: Use at least PETG, I've used PETG-CF Use 4 walls and 4 top/bottom layers Gyroid infill suggested Fuzzy skin suggested for better grip
Yo dawg I herd you like pegboard, so here is a pegboard for your pegboard... Ok, some explanation on why this might still be useful: For example, if you hang longer tools like screwdrivers on the pegboard, they obstruct a lot of valuable…
My pegboard had too much empty space and I run out of hooks. Instead for using an existing hooks design, I chose to create my own, and get to know how to actually design models. There are different pegboard form ParkerSide. The hole…
An IKEA Skadis compatible clip for the Powerfix magnetic tool holder bar sold in Lidl. These clips are designed to hold the bar in place regardless of whether force is applied to the bar upwards or downwards, hence the upwards facing part…
This is just a 2 part multimeter holder for the Lidl Powerfix pegboard, and the commin el-cheapo multimeters. This allows the multimeter to be used as-is, while on the wall. Removing is a bit more complicated this way, but this is what I…
Nerf dart holder for the Powerfix tool wall organizer from Lidl. Yes, I proudly display my Nerf guns on the wall of my office. :-) Update 03.05.2018.: Widened the dart holders by 0.2 mm to account for the printing tolerance and avoid…
Upgrade your small parts magazine! The Powerfix / Parkside Kleinteilemagazin 17 & 33 (sold by Lidl, FR: rangement pour matériel de bricolage) and Allit VarioPlus Hobby 17 & 33 (sold by Hornbach) come without lids. Take them anywhere! This…
Remix of this storage found on thingiverse , adapted for the new Powerfix panel attachment system, with the round attachment.
Gemacht für die T-Griff Schlüssel die ich vor jahren mal bei Lidl erworben habe. Damals noch unter der Marke Powerfix. Warscheinlich kompatibel mit den heutigen Parkside Schlüsseln. Folgende Halter sind im Paket Hex / Imbus 2, 2.5, 3 Hex…
Držáky k nástěnému organizéru z Lidlu. Tištěno z PLA na ležato bez podpěr.
I used 21 by 21 mm grid to be able to position it precisely in my drawer. If you need to split the model, do it with 45 degree cut, the grid will hold the models fine. Bought this Powerfix set in Lidl, but quick online search for 15 piece…
I saw various drill holders but not for this type of pegboard. So here is my idea of Lidl/Powerfix pegboard drillholder. Hope you will like it.
V1 ist in Anlehnung an die originale Backe mit zusäzlicher Zentrierung für z.B. runde Bauteile V2 ist besser für den 3D-Druck geeignet; die Rundungen wurden durch 45° Fasen ersetzt. (more print friendly)
Lidl POWERFIX Profi+ / PARKSIDE Clamp replacement JAW You clamped something too hard, didn't you. ... too hard for your OLD CLAMP! Because this one is (probably) much stronger! Replacement for broken Lidl POWERFIX Profi+ clamp jaw (300mm,…
Halter für digitalen Winkelmesser von Powerfix für meine Werkzeugwand die im Entstehen ist. Holder for digital protractor from Powerfix for my tool wall that is in the making.
Um die POWERFIX Aluminium Kartuschenpistole auch ohne zusätzliche Kartusche oder für andere Materialien zu verwenden, habe ich einen Einsatz mit passendem Gewinde für die gängigen Dosierspitzen erstellt. To use the POWERFIX Aluminum…
A small connector to connect two clamps together to clamp wider parts. This concerns a connector for the Powerfix / Parkside brand clamps. A dd yourself : - m5 bolts (maby some glue to hold them in place) R ecommended : - at least 25%…
I designed this bracket for my Powerfix caliper case (I like to keep calipers inside their cases). The hooks are a little bit loose, but I found that less frustating that being to thick for skadis holes… I printed mine in PETG but ABS or…
Redesigned-Honeycomb fixture for this strange tool grippy thingy I bought in Lidl.
Deburrer holder for Lidl pegboard. My printing settings: Layer height: 0.2 mm. Infill 20% Walls: 3 at least Supports: Yes (build plate)
Don’t throw away your broken clamps! This is a heavy-duty replacement jaw for the Powerfix Profi+ one-handed clamps (commonly sold at Lidl), though it is designed to be compatible with many similar "budget" quick-grip clamps found at…
New stronger hook for Powerfix tool panel
Trennstege für die Schubladen des POWERFIX Kleinteilemagazin (Lidl/315467). Es sollte auch für Aldi Workzone, Jaycar und Hofer passen. Dividers for the drawers of the POWERFIX small parts magazine (Lidl / 315467) It should also fit Aldi…
At some point in time, the Powerfix Wall mount pegboard changed the holes from squares to circles, and the square peg won't fit into the circular holes unless you trim the corners with side cutters. Since this isn't very elegant, I made…
I'm a big fan of the articulating lamp by igorF2 , and I have a pegboard affection too... So this just happened naturally. Fits the pegboard nicely, and allows the lamp - or any other attachment, like the spring loaded paper holder to be…
New organizer for the POWERFIX screwdriver set from Lidl. Print instructions Material: PLA Layer thickness: 0.3 mm Infill: 15% Supports: Yes
A practical desk stand for Powerfix Mini Tool Kit (sold in Lidl). Print instructions There are two versions of this toolkit on the market: IAN270033 and IAN304786 (with slightly different sizes of the extender and the tweezers.) Check…
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Mine is printed from PETG , but you can choose any reasonable material Dimensions: OD: 60mm Height: 100mm Wall thickness 2,5mm Recommended Parameters: Perimeters: 4+ Brim: Yes Supports: No
Powerfix Insect door corner Print instructions Category: Replacement Parts
Interlocking part for Powerfix Metal Shelving Unit, bought from Lidl. Allows to lock multiple units together to align them and make them less likely to tip, especially if you have two at a 90 degree angle. Print instructions Recommend…
Another slidey-lid box. This one's loosely based on my previous multimeter case (https://www.printables.com/model/594502-multimeter-storage-case-with-storage-for-two-test-). But I didn't need the storage for the extra leads since I've got…
Lever to repair powerfix (Lidl) calmp. Print with 50% cubic infill from PET-G works fine.
Powerfix Digital Caliper Extend Category: Hand Tools
I printer it on my Ender 3 s1 with 2mm layer higth and 20% infill with max speed (150 mm/s). No brim or raft needed.
Náhradní díl pro opravu svěrky. Tiskněte ve svislé poloze s vrstvou 0,2 mm z PET-G. Prosím, zanechte recenzi. Je to zdarma a udělá mi to radost. EN Spare part for repairing the clamp. Print vertically with a 0.2 mm layer of PET-G. Please…
This is a support for hole saws from 60 to 95 mm that fits into the ParkerSide (Lidl | PowerFix) pegboard. If your printer can handle up to 45º, face the model with the open side to the bed. You will then only will require supports for…
Lidl changed their tool wall to use round pegs instead of the old square ones making the current designs on Thingiverse suboptimal. The hooks should be printed on their side and with a high wall count and with supports to give the parts…
Clamp adapter for the Parkside rail. Fits in the Powerfix clamp but maybe others too. Printed with PLA.
Lidl's Powerfix Magnetic Bar mounting part spare, same as original, prints in two parts for ease.
its a remix of a hot glue sticks distributor
Its a fixture for the magnetic strip. Sold in Aldi or Lidl (I cant remember which). Super useful for the honeycomb pegboard! I made a small support on the print so you don't really need to enable supports. The one that prints is easily…
This is a support for a hole saws from 25 to 62 mm that fits into the ParkerSide (Lidl | PowerFix) pegboard. You will need supports for the part that fits into the pegboard. can be printed with the biggest side on the bed. The numbers are…
Part for repair my broken Powerfix pro clamp. Fusion 360 and Step files included. It is printed from PETG with 0.2 mm layer, PLA is suitable too. Print with four or more walls.
I have a cheap multimeter from Hofer (Aldi) and wanted to mount it on my wall. It holds it well enough t onot fall. I' ve used it for 2 months now and had no problems. The only downside is that it can be hard to put the meter back on.
Flat wrenches holder for Lidl's Powerfix tool wall organizer. Category: Other
The lever for the newer powerfix clamp is already available but I couldn't find this one, so i drew it with Fusion 360. I printed it in PETG 0,3 mm with supports only in the “handle” portion, not in the recess around the pin hole.
The covers for the pliers jaw. Category: Hand Tools
box for lidl-powerfix ratcheting wrenches, with magnets 8mm
My box for my Powerfix scalpels/Exacto knives broke. This is a replacement, more space efficient and has more storage for replacement blades. One thing that always bothered me with the old box how much space was wasted due to the big…
Gridfinity 4x2 Base for the Lidl Powerfix Pegboard
I've got a cheap pillar drill that I picked up for a song a few years back. It's not top quality, and you certainly couldn't do precision work with it. But, it's what I've got, and it's fine for my woodcraft. One of the most hilarious…
Soporte para fijar cajas de powerfix bajo una estantería
The anti-slip rubber on the screwdriver handle broke, so I designed a replacement. Print from PETG, 100% infill, 2 perimeters, 0.2 layerheight, print orientation as in the last photo, set a pause in the slicer to insert a cylinder magnet…
Hi, Another threading die center tool to help us in cutting straight threads, thanks to the user Mr. Taeho98 fot the idea I decided to remake completely the project to fit to my thread tools kit , it is a chinese tools bought at Lidl, the…
Simple tape holder for powerfix organizer Category: Hobby
So this is the Vernier Caliper Mount I made for my brother's drill press. It's an evolution of the design used for my own drill press, and meets specific design criteria that my brother asked for. He was a lot more adventurous than me,…
PowerFix Multi-detector protection box Video to the tool: Model: hg04213a
tiskl jsem s 40% vyplni
Držák na 12ks šroubováku pro desku powerfix
This clip is specially made to fit with Lidl Powerfix Pegboard Tools SDK by ppeterka | Download free STL model | Printables.com types of hangers They're really small so I recomend to plint in a lower speed
Holders for micro tools: bits, cutting discs, polishing tools and others. Compatible with: bits holders: http://www.thingiverse.com/thing:1242256 storage boxes: http://www.thingiverse.com/thing:1249333 screwdrivers holders:…
This is a socket holder for 3-in-1 spanner with socket set from Lidl's Powerfix range. All 10 sockets fit together as closely as possible while maintaining a regular shape. Print in any material and with any settings you like. Scale up by…
There are many magnet bars on the market, this is holder for mine with height of 23mm
Bits holders for Lidl's Powerfix tool wall organizer Compatible with: micro tools holders: http://www.thingiverse.com/thing:1919731 storage boxes: http://www.thingiverse.com/thing:1249333 screwdrivers holders:…
Remix of an organizer for the POWERFIX screwdriver set from Lidl.
I've included the sketches in the photos to show some dimensions. Uses M6x10 CH bolts as the original countersunks were rusted and stripped.
Small storage boxes with optional holders for longer things like pencils etc. Compatible with: bits holders: http://www.thingiverse.com/thing:1242256 screwdrivers holders: http://www.thingiverse.com/thing:1242256 micro tools holders:…
Screwdrivers holders with additional places for 1/4" bits. For "short" version leave one free hole between lower and upper part. For "long" version leave two free holes between lower and upper part. Compatible with: bits holders:…
Parametric single hook for Lidl's Powerfix tool wall organizer Category: Tool Holders & Boxes
A simple snyg fit toolholder for the mini ryobi RSDP4-120
ASA, 25%infill, 3 Wände, - hält soweit sehr verlässlich
I designed a clip for the PowerFix screwdriver packaging. The clip prevents the packaging from being opened. It may also work on other packaging. I've made five different versions, and this one is the best. It's easy to use. It doesn't…
Improved PCB Grips/Jaws for Powerfix Vice I found that the original grips on my small Powerfix vice didn't provide enough grip when soldering PCBs. The boards could easily move or slip, making it difficult to work on them precisely. So I…
Thanks to @Murales i could modify the original design within seconds to be better printable and maybe a bit stronger. also the hole can now be printed without support.
This clip is specially made to fit with Lidl Powerfix Pegboard Tools SDK by ppeterka | Download free STL model | Printables.com types of hangers They're really small so I recomend to plint in a lower speed
A simple snyg fit toolholder for the mini ryobi RSDP4-120
box for lidl-powerfix ratcheting wrenches, with magnets 8mm
Filament Spool Holder for PowerFix Racks This bracket enables you to mount a variety of different spool sizes above your printer in a "PowerFix" (Lidl) rack. This way, you can place two Mk4 printers on one shelf (900mm wide rack) while…
