Counting matching models…
A simple registration jig for printmaking with customizable dimensions Customizer Instructions Download configurator.zip and extract it Open configurator.html in the extracted folder Change parameters as desired Click the download STL (or…
Your piece of wood should be at least 5"(125mm) wide, and 3/4"(18mm) thick. Cut your board to the desired length and these will attach on the end. I recommend making it at least 2 inches longer than your roller. Accomodates rollers that…
120 mm diameter Made using the Prusa MK3S+ layer height: 0.24mm Infill: 15% Support only on bed Joined together using a 5mm threaded insert and screw
STLs for 3d printing a hard brayer. You could use it without rubber to make a roller for applying pressure. My settings: Layer Height: 0.2 Wall line count: 2 Print Order: Inside to Outside Alternate extra wall: Yes Bottom Layers: 4 Top…
Pins and Tabs used for registration of multi-color relief prints. Print at least two Pins and then as many tabs as you need to do a print run. When printed the tabs should fit tight into the pins. This is by design. Depending on your…
Scale the Z thickness according to application: e.g. for intaglio useage make it thin to minimise the white border effect. ☼ FreeCAD source models included
I printed it with the business side upwards. Printing upside-down might give a smoother print surface, but would be marred by any 1st-layer imperfections like squishing. ☼ FreeCAD source model included
