Counting matching models…
Austausch-Gleitschiene für den Winkelanschlag der Proxxon FET, um das übermäßige Spiel zu reduzieren. Benötigt wird neben dem 3D-Druckteil noch eine 24mm lange Gewindestange M4 für den Feststeller. Ich habe in die Bohrung vorab Gewinde…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Update 2024-11-17: After ~3 years of near daily use, it broke. I've made a few subtle updates to the model that should both strengthen the fracture point, and clean up a model a bit. I had used an older design daily for a year, before it…
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
Theses are gauges for easily set the support at usual angles. Make sure your printer is on the corner ! Print Settings Printer: Any Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Notes: Verry simple to print. Make sure your printer…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This model is supposed to expand the use of the ProxMark3 Easy by making it more common in your work environment. 🏢 I need to say, before installing the ProxMark3 Easy on the model, you should first remove the middle layer of the…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Just a fun project for a free time, a capacitive proximity sensor mount for a laser cutter. It can fit a sensor that has diameter about 12mm and fit with 24mm laser lens. It didn't take me a long time to design this so if there is any…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Archimedes found that π≈22/7… But could you explain that approximation intuitively? I provide a “ proof without words ” that is easy to print and easy to understand: The pieces form a 22×7 cm rectangle exactly, but could also form an…
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for one variant
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…
Works great, 60 mm wide. Print instructions When assembling turn nut M6L counter-clockwise.
made using 3 views from the internet I didn't have accurate fuselage and wing sections so everything is just an approximation, maybe someone that has foaming filament can use it to make an edf rc plane out of it
This is a Proxinity Alarm from Tom Clancy's Rainbow Six Siege. Since the file download of Thiniverse is bad, I included "R6PA_All_Files_ZIP.ZIP" to download all files at once. You're welcome. It was modelled in Fusion360. F3D files are…
Though by design in order to keep bulk and weight to a minimum, the original model was quite flimsy and susceptible to breakage (especially when interacting with the button). Note : There are two versions of the “Slim” case that…
Human knee. The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
This case is designed to fit the Proxmark3 Easy (from Aliexpress or dangerousthings) like a glove. As such it has pretty tight tolerances. Print it standing on the “nose” with a 0.4mm nozzle. Walls are 0.8mm so it basically only consists…
We are currently building two armies for playing OnePageRules: Age of Fantasy. There are a lot of models available. However, I wasn't able to find fitting proxies for everything. So, this is my take on the 'Ghost Swarms'. Six small ghosts…
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
PLA Settings that prove to work: *0.2mm layer height *20-25% infill (cubic or gyroid) *3 walls/perimeters for strength and visual appearance (not necessary, just suggested) This is designed to print without supports. Pairs best with the…
These four characters are NOT the characters from Zombicide: Toxic City Mall but somehow look comparable, so you could use them! The character sheets are available on the original zombicide website:…
An alternative proxy marine design for the community. I wanted to create something a bit more modular, and down the road I'll produce more front armor plates for alternative looks, such as a skull decoration or ammo pouch. Follow for more.
Sometimes it is practical to use the ProXXon IBS/E to cut thin pipes or rods. And it would be nice if this could also happen at an angle of 90 °. So I did a remix of the cool tool published by GreaseMonkey88 to cut small diameter rods or…
Belt buckle quick release, Print with 80% infill for more strength in the locking tabs.
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…
Router base for proxxon dremel (Proxxon Feinbohrschleifer FBS 240/E). Will fit other dremels with a 20mm diameter for attachments. Uses a M4 screw and nut to secure the dremel. I still recommend to also grab the dremel during use and not…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
This is an older project I have finally got round to uploading! A drill press stand designed to fit the Proxxon Micromot 60E/F. It also gave me a chance to try out my laser cutter at the time. Unfortunately there isn't much in the way of…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Case for ESP32 board with external BT/wifi antenna I used as BT proxy from home assistant. Board I used is AZ-Delivery ESP-32 Dev Kit C V4. I re-purposed an ipad usb-c charger and micro usb cable. I'm sure there is a nicer and less…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…
This is just my take on the commonplace hinged rugged box design. They're all much of a muchness, and mine was VERY loosely based on Yanev's design: https://www.printables.com/model/39729-tool-box-parametric I literally just made an…
I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make…
Anycubic didn't include that tool with Kobra 2 Pro, so i made my own. Dimmensions are equal to original part. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,15 Infill:…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Wall holder for 15 combination wrenches (6mm to 21mm). Numbers indicate the wrench width, suggested to print in separate color. The Proxxon SlimLine kit fits perfectly. Includes three mounting holes (4mm Spax). I printed with a 0.25mm…
I wanted to build a cheap and accurate CNC mill, to engrave and drill simple PCB boards. The build is using easy to get components (mostly 3D printer parts), and some printed parts. The plan was also not to make any irreversible changes…
Here's my proxy model for the Frosthaven summon, the Wraith! This could be used fairly well for the OG Gloomhaven monster, the Living Spirit, or even for any sort of wandering spirit in a DnD game =) The chains needed a ridiculous amount…
This simple stand is designed specifically for the Puffco Proxy vaporizer. It securely holds the Proxy while keeping it steady and upright, when not in use and on display. The stand is compatible with the stock Puffco Proxy glass,…
Here's my proxy model for Alienoid from the King of Tokyo board game! This guy was a real challenge to print because of those segmented tentacle leg things. I typically avoid using top connections when designing my supports, but they're…
Inspired by the multi corner cutter offered by https://www.shiftinglands.com/ I decided to make something similar for myself. I also added a circle shape that allows me to cut circles as well. Some assembly and non 3D-printer work is…
Proxxon MF70 CNC kit The Proxxon MF70 milling aluminum: https://www.youtube.com/watch?v=0W1iQ1PUNVY Following improvements/changes have been made compared to the design of ttsalo: full x-axis table range is now available. Using the ttsalo…
Fully 3D printed table saw sled for the mini Proxxon KS 230. Parts: Sled Runner Guide Nut Railnut Lever Stop Fasteners (not 3D printed :-) 1x M3x20 socket head (fully threaded) 1x M4x25 socket head 2x M3 hex nut 1x M4 hex locknut The…
First of all thanks to krom for the beautiful original model and sharing the f3d file. You should print the watering can with PETG . With PLA there is a risk that the can will leak. I printed with 100% infill to be on the safe side. It…
It can be simply printed without support. Ventilation holes help drying. Only 2 neodym magnets needed (2x3x7mm) to hold both sides together. Recommended 100% infill and layer height 0.15mm. Use Prusament PET-G, because it is the best…
PROXIMITY_45 An alternative shroud with many advantages. Replacing the fan shroud requires removal of the printhead from the gantry and unplugging connectors from the PCB. The solder connections of the PCB mounted JST connectors are…
Here's my proxy model for the Frosthaven monster, the Algox Icespeaker! This guy needs a fair amount of support, especially under the axes. Make sure that you also get his upper fangs and a bit of his right horn! As always, the .blend…
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
Here's my proxy model for Gigazaur from the board game, King of Tokyo! I had to separate the head to get it printed because of the teeth, so I included versions with the head attached and without. I put the model on a 50 mm base, which…
Hey everyone - here's my proxy model for Meka Dragon, from King of Tokyo! This guy is the sixth and final core kaiju from the game, so the set is finally complete! As always, the .blend file and any pre-supported .3mf (including the one…
There are a number of Stompa proxies out there but none of them had that 2nd Edition vibe, so I designed my own. It's very similar to the original but not an exact copy. Many thanks to reddit user Marcus_Machiavelli for measurements from…
Here's my proxy model for Space Penguin from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) As always, the .blend file and pre-supported .obj (the one…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them
Here's my proxy model for the Frosthaven boss, the Fish King! I was so happy with how the net worked out for the Herder that I figured that I should go ahead and include one here, too. Since capes look really cool on miniatures, I figured…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Here's my proxy model for Cyberkitty from King of Tokyo! I got to use a lot of the techno-greeble techniques that I learned for the Alienoid proxy, but really turn them up to 11 here, which was really fun =) Printing this model was a real…
Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…
Fence for Proxxon MBS 240 I printed it in PETG, but a stiffer filament is recomended. Uses a M5 Heatinsert and a M5x30 Screw with an 8mm Hex Head.
Here's my take on the Frosthaven monster, the Algox Snowspeaker! The artwork for this guy has him looming up like a genie from a swirl of snow, so I decided to really lean into that image with my model. I hope you enjoy it! As always, the…
Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)
This is a redesign of my Slim Case. The original stayed true to the shape of the PCB, but that made the HF-Part a bit hard to use with cards at times. The HF-Cards also don't need to be that close to the Antenna, so I just extended the…
Hey everyone - here's my model for the Frosthaven Algox boss! I'll avoid saying too much about the model in order to avoid any potential spoilers, but I just want to give some quick printing advice: make sure that there's some support…
Here's my proxy model for the Abael Herder! I included two versions of this model, one with a bone helmet that's a bit closer to the artwork, and one with a bandana. This model pretty much requires SLA or a 0.25mm nozzle (or smaller) for…
Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…
This tool is a auxiliary tool for grinding drills with a proxxon TSG 250/E plate grinding machine. The tool is inserted into the rail so that the angle matches the drill. For easier printing, the template is divided into two parts
Here's my proxy model for The King from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) As always, the .blend file and pre-supported .obj (the one that…
Here's my model for the Frosthaven Boss, the Lord of Chaos! I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports. Fortunately, none of the “interior” of the model has overhangs…
Hey, this is a free Dreadnought Proxy. Supported files are not included.
Simple design to hold a Proxxon Micromot 60 rotary tool. It holds the 12V power supply adapter and all accessories which come with the “ Model building and engraving set with Micromot drill/grinder 60/E ”. The collets holder can be slid…
12/20/2025 update: I've added a v2 of the model that should be easier to print. I've also increased the sizes of some of the details on the model to make them easier to paint. Here's my proxy model for the Frosthaven summon, the Skeleton…
Here's my model for the Frosthaven monster, the Lurker Soldier. Just as the artwork for the solider is a fresh iteration on the original Gloomhaven Lurker, I figured that it would be good to make my Solider model a fresh iteration on my…
Here's my proxy model for the Frosthaven Boss, the Prince of Frost! The artwork for this guys makes me think of just the fanciest Snow Imp that ever was, so I used the same basic model proportions for this guy as I did for my Snow Imps.…
This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
A handy adjustable distance rail for parallel cutting with the Proxxon Micromot 60 rotary tool. It might also fit other rotary tools from them but you'd need to check yourself. Nevermind the long bolts in the photos, I was still waiting…
Approximation of a Tamagotchi shape based on photos and rough measurements.
Give your Moxbox some extra flair. You can scale the model, but dont scale Z or the color changes dont line up. You can find my other HomeLab logos on my profile. Print at 100% infill with a layer height of 0.08mm with a base layer of…
Couldn't find this part available, so I made one. It makes the Dremel Press compatible with multi-tools with a 20mm neck like the Proxxon FBS 240/E, without losing any functionality. It holds the tool centered, as the original Dremel one.…
PCB Cutting table for Proxxon Micromot drills with a 20mm neck. Very useful mini cutting table can use to cut PCB boards. The table can be connected to a vacuum cleaner. Use a 40mm diamond disc for cutting The model consists of 3 parts,…
IT Pinguino De Longhi, adattatore scarico aria calda vero l'esterno, diametro interno 130mm, esterno 135mm, identico all'originale, adattabile a qualsiasi condizionatore EN Pinguino De Longhi Portable Air Conditioner air vent, exhaust…
Hi everyone - here's my proxy model for the Frosthaven boss, the Seeker of the Abyss! There's a lot of Lurkers in this game, so I wanted to make sure that this guy was distinctive and easy to differentiate from the others. The artwork for…
Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.
The gun moves up and down and rotates approximately with the same range as the real gun. All holes and inserts must be filed clear of any flash/brim/support material. Most parts are friction fit, but some need to be glued. Assemble using…
Simple Wrench Hanger for Honeycomb Storage Wall (HSW). Designed to securely hold wrench sizes 6-19. The hex holders are arranged thoughtfully so the two files align seamlessly when placed next to each other on the wall. Why I designed…
Modified shallax's design to fit larger USB cables (I couldn't get any to fit in the existing model) and trimming down the support brace as it extended too far for me and wouldn't let the lid close. 3 file options for case, lid, or case…
This is a small threaded adapter that makes the Dremel 8220 rotary tool fit into the Proxxon MB 200 drill stand (after removing the Dremel’s EZ Twist cap). Modeled in Autodesk Fusion 360 and printed on a Formlabs Form 1 . You can view the…
There are two of these guys, so I figured that it would be fun to put together two different models. The howling one is really easy to print in the upright orientation, only needing a few support points under its body. The stalking pose…
super small and adjustable table saw for straight cutting, with slots on the table for additional jigs height and width adjustable from 0mm up to more than 45mm if you slide the disk mandrel out just two m3 screws needed, you may need to…
Einlage für einen älteren Proxxon Ratschenkasten. Die Einlage besteht aus 3 Teilen um auch auf kleineren Druckern gedruckt werden zu können. Maße (alle 3 Teile zusammen): 430mm x 172mm x 46mm. In meinem Beispiel mit PLA gedruckt.
Based on my stand for Dremel 3000, I designed this one for Proxxon 60E upon request from Jara_454860. The base has two holes that allow it to be attached to a worktop. Or you can attach it to a piece of wood board to make the device more…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design →…
Here's my proxy model for the Frosthaven boss, the Fracture of the Deep! I did my best to make it as self-supporting as possibl, but this guy still needs a fair amount of support. There's a lot of armor plates and spiky protrusions and…
Die Minidrehmaschine Hobbymat MD65 (baugleich Proxxon SD300) hat keine Schloßmutter an der Z-Achse, sondern nur eine durchgehende Leitspindel mit 1mm Steigung. Um den Support zu verfahren muss ordentlich gekurbelt werden - das ist mit dem…
Gridfinity storage for Proxxon grinding and polishing tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .3 Infill: 20% Filament: eSun PLA Category: Tool Holders & Boxes
Simple stand to hold the 8 sanding arbors of Proxxon PS13 pensander
Here's my proxy model for the Elder Ooze from Frosthaven! The artwork for this guy is toweringly high, but since it's still a single-hex monster, I tried to capture that sense of scale by covering it with various skeletal bits. If you…
The toothbrushes were still lying around the bathroom, so I decided to do something about it. You can stick it with double sided tape or glue to the cabinet or loose on any surface, or in the shower. The model does not require any…
Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…
Curaprox Toothbrush Travel Case by @peko remixed to have a latch instead of 2 magnets since they are quite hard to find. 2 Variants: Single latch & Double latch (for warped beds) Print in petg with 3 walls :)
