Counting matching models…
These 3D-printed 5” deep root tree pots are perfect for small-scale planting of oaks, chestnuts, Japanese maples, and more. Designed for air pruning to prevent root binding and promote healthier growth, they can also be used as standard…
Replacement for a lost lock part for my cheap no-name pruning shears. Version 2 works better than the original design. Optionally it can be secured with a small wire (diameter: 1mm). Just cut a paperclip and push it in the small hole. See…
This model is a protective sheath for inexpensive pruning scissors from AliExpress , designed to be printed in TPU for flexibility and durability . The sheath provides a safe and convenient way to store and transport your scissors,…
Something to store the oil bottle that came with my Worx WG324 5" Pruning Saw. 26mm x 38mm Oil Bottle Holder files, several versions. One with two 3mm x 10mm magnets to hold on metal surface as pictured. Another with two holes 40mm apart…
I have designed a new Milwaukee battery mount for the Panthem loppers/pruning shears, since the original mount had a lot of play and the battery wobbled significantly. This is the Shear:…
These are the standard size 0.4mm nozzle seed starting cups, adjusted to have more air pruning surfaces by adding cut outs on all sides. It takes a few minutes extra to print due to the gaps, but it does use less filament.
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A cylindrical air pruning pot for…
A holster for Gardenite Ratchet Anvil Pruning Shears . I'm not comfortable sticking the shears in a pocket, but I need to keep them close when I'm doing yard work, so I made this. 10/29/19: I added a newer version that is much slimmer. I…
A Guard for the pulley operated pruning shear on the Vevor Extension Pole Saw (RZYLG-2). The Vevor Extension Pole Saw kit comes with a pulley operated pruning shear. This is a guard to cover the tip of the shear that points towards the…
The nut from a pruning saw purchased in Germany fell off and went missing. The nut I purchased from a hardware store in the USA had the correct metric thread but did not fit into the saw's recess. Therefore, since “to a man with a 3d…
This simple tool is easy to print and is used to attach your pruning shares to a broomstick. you will need to add some wire and two 4 mm pins. To attach the pieces together use duct tape on one and six 3mm screws at 12mm length on the…
These deep root tree pots are perfect for growing oaks, chestnuts, Japanese maples, and other deep-rooted trees. Designed for air pruning to promote healthier root systems, they also work as regular pots when drainage holes remain open.…
Just a quick design for an indoor or outdoor planter. A complete lie, since the first one took ages to figure out, but this one was quick! It is equipped with bypass watering channels, reservoirs and air-pruning features to help keep your…
This model is a protective sheath for inexpensive pruning scissors from AliExpress , designed to be printed in TPU for flexibility and durability . The sheath provides a safe and convenient way to store and transport your scissors,…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This is a custom wall mount for a Fiskars Pruning Stik. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source .fd3 (Fusion 360), .stl, .3mf…
Something to store the oil bottle that came with my Worx WG324 5" Pruning Saw. 26mm x 38mm Oil Bottle Holder files, several versions. One with two 3mm x 10mm magnets to hold on metal surface as pictured. Another with two holes 40mm apart…
Replacement latch for a Löwe latch used to lock the hand scissors when closed. 3MF File: Slowed printing with 50% cross hatch infill, printed with PETG
WARNING - Use at your own risk, this will disengage safety trigger during use. Keep hands well clear of cutters. Always remove battery and shoe when tool is not in use! This is a TPU shoe that eliminates the need to squeeze both the…
This is a replacement sliding lock for the Fiskars pruning scissor. Recommended Print Settings: .2 layer height PETG (but PLA will work too) Fuzzy skin on outward facing sides
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
With this replacement for the original foot part of the Fiscars pruning stick you can much more comfortably pull your pruning stick against your body (hip or breast) when pulling hard in large height for cutting branches. The original…
I have designed a new Milwaukee battery mount for the Panthem loppers/pruning shears, since the original mount had a lot of play and the battery wobbled significantly. This is the Shear:…
These are the standard size 0.4mm nozzle seed starting cups, adjusted to have more air pruning surfaces by adding cut outs on all sides. It takes a few minutes extra to print due to the gaps, but it does use less filament.
This part can replace the locking lever on your Fiskars pruning shears if your piece breaks, like mine did, or if it just doesn't work terribly well (as they sometimes don't). Specifically the Fiskars model 398402-1004 Recommend printing…
This planter is designed along similar principles as the "Air-pot" product, although it uses a different mechanism. The standard version has an outer diameter of 108mm, intended to fit inside cut-down 2l coke bottles. With the addition of…
Gardena Pruning Shears Belt Holster A holster for carrying your Gardena pruning shears safely and within easy reach on your belt. Attach the holster to your belt using the built-in belt clip, then slide your shears in for quick access…
Keeps roots from being over watered and encourages root growth. Removable inner pot makes changing out plants that have dormant periods easy. No need to repot for each season, just swap out the inner pot.
This planter allows the roots to air prune. Some plants like that. It is a 5 part print. You need 2 halves, 2 rings and 1 bottom for a planter. Assembly is done by placing te bottom between the halves and adding the rings to the top and…
Summary I designed this model to take advantage of air pruning. Air pruning is a method where you add holes to a pot to let roots near the edge burn due to dryness. This lets plants develop healthier root systems and to grow faster over…
Terracotta pots are porous, meaning that they absorb water from the soil and help it dry out a lot quicker, and also let it breathe better than plastic pots. This is great for cacti, succulents and other plants that want good drainage and…
The tightening gadget for my cheap garden saw isn't really a universal design but maybe it will be useful to someone.
UPDATE: i added the strap stl and there are pictures showing how to install it. I've removed it and put it on a few times now and it seems like as long as your print settings are good it shouldn't tear but don't go yanking on it like a…
Organize your pruning shears using the Ryobi Link storage system. Print recommendations: Layer Height: 0.30mm Supports: None Infill: 0% Perimeters: 3 Filament: OVERTURE Grass Green PETG.
Diameter, mm X, mm Y, mm Height, mm Time Plastic usage, g Volume, L 100 105 114 100 1h34m 25 0.87 100 105 114 150 2h6m 34 1.3 120 125 137 120 2h12m 35 1.5 120 125 137 150 2h36m 41 1.88 Settings used to estimate time and plastic usage:…
This is a Replacement Mount for the Tarvol Pruning Saw to attach to a Climbing Belt. Requires: m3x12 Allen Bolt w/Nut M4x20 Allen Bolt w/Nut Heavy Duty Pruning Saw (Razor Sharp 14" Curved Blade) Comfort Handle with Saw Blade Enclosure -…
This is a wall-mount holder for handheld pruning shears. Two holes on the front allow for easier installation of M3 wood screws (and likely also US #6-32 screws).
Funda para la tijera de podar Felco Nº 2 y 8,aunque modificandola un poco puede servir para mas modelos y marcas
WTF? This is An Air Pruning Pot! .stl has 170x170x170 volume. Please adjust the size as your plant! I tried 85~180mm. Those are well works!! And well printed on Prusa Mini+ Enjoy!!
the handle of my fisherman's pruning shears broke, so a new one had to be made.
After printing you need a fulcrum for the scissors to move properly. In the photos a screw was used. The polyholes.scad library was used to make a perfectly sized hole for the screw. Thanks to Mendel90 for writing the ‘polyholes.scad’…
An integrated case of the Samurai Saw "Knight" series and the Okatsune pruning scissors. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.3 Infill: 10％ Filament: […
Unfortunately, the plastic handle of my Sandvik 345 pruning saw broke after little use. The saw blade was still sharp, though had some surface rust, but not enough to be of concern. So, the saw blade needed a replacement handle. I could…
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I was looking for a simple, easy to…
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I've got a few air pruning trays…
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A cylindrical air pruning pot for…
modular octagonal seed cells with air pruning slots does not need supports or infill, wall thickness 1.2mm for 2 perimeters using 0.6mm nozzle
I modified the model to have a little arm that can hold this part on a cart with a 1/2" thick wall. Hole for zip tie.
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
This is a replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips for use when the original gets brittle with age and breaks I used PETG which seems to work just fine, but other stiff materials may also be acceptable
Simple prints. I cut (with a small chisel) a slight notch on both sides of the original snips to allow the new clip to slide into place. The clip is direction both left-to-right and top-to-bottom.
WTF? Air Pruning pot is engineered to enhance both aeration and moisture regulation as roots grow. Strategically placed holes in the base and sides allow roots to naturally expand outward, preventing root crowding while fostering a robust…
