Counting matching models…
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Spiral vase: On Supports: None Post Process Not necessary
Attention, this is just a joke, not for real use! Is a sudden revolution breaking out in your country? Or do hordes of zombies surround your house? Don't have any weapons, just a 3d printer? Don’t worry, you’ll be done in a two hours and…
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer bottom surface: Print on a textured plate. For a nicer top surface: Change the Lift Z to 0.1 Top…
Pyrite Octopus He is a very, very distant relative of the pirithog. He lives in the darkness of deep sea caves and rocks. I added three versions. "Long hair", "Punk hair" and "Short hair" My family, prefer the "long hair" version. (in the…
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
A remixed version of the Pyrite-like Penholder by ncsandor (https://www.printables.com/model/55654-pyrite-like-penholder) which can successfully be printed in vase mode. The outer surface was isolated and solidified, manifold errors…
Print Settings Material: Spectrum - PLA Rusty Copper / Spectrum - PLA Peral Gold Nozzle: 0.4mm Layerheight: 0.15mm Brim: On Support: Build Plate Only (Necessary otherwise the head of the mushroom will be ugly) For Mini Settings Printer…
Print Settings Material: Gembird - Galaxy Blue Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: None Top fill pattern: Concentric Post Process Not necessary
Pyrite-like pen holder or vase or whatever you want. Easy to size. Print instructions I printed it from Pla, without support, but there is a small point on it where it is a bit overhang, not dangerous, it can be easily repaired with a…
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…
Print Settings Material: C-Tech Bronze Pla Nozzle: 0.4mm Layerheight: 0.1mm Supports: No necessary, work fine, don't have to be scared at the first layer. For a nicer top surface: Change the Lift Z to 0.1 Top fill pattern: Concentric
Here is a version of the smaller pyrites: https://www.prusaprinters.org/prints/63689-pyrite-circle-penholder-small-pyrite Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position:…
Be especially careful when printing. The pyrite snail is an extremely aggressive creature. Don’t be fooled by the lovely cute face and cute snail shell, these creatures are extremely territorial in nature and twice as fast as the average…
Here is a version of the larger pyrites: https://www.prusaprinters.org/prints/62186-pyrite-circle-penholder-big-pyrite Print Settings Material: Gembird - Silver Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned…
Print in spiral vase mode. Men version model are a little wider so as not to slip completely off the bracelet on it. Print Settings Spiral vase: Yes Layerheight : 0.15mm Material: Gembird - Christmas Green PLA Nozzle: 0.4mm
The (210) faces of Pyrite, forming a pyrite dodecahedron (also known as "pyritohedron"). These can occur naturally, and almost look like pentagonal symmetry. The space group is P a-3 (cubic). It's kind of hard to spot the cubic symmetry,…
Remix of Pyrite Vase to lamp shade. Print lamp shade in vase mode. Top ring part is to cover bulb cable and addapter part above lamp shade. Lamp profile with top ring. Ilustration how to use top ring part and screws and nuts from another…
The natural habitat of the wild pyritehog is the depths of dry rocky dark caves, but it has also occurs in the hidden corners of human children's rooms They are more active at night, thereby causing great annoyance to other living beings.…
I added a cut-bottomed egg, a cut-off portion, and a full egg. I only printed the cut bottom egg. Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm or lower layer height for better quality. Supports: None Top…
If your hand is smaller than the average man’s hand, reduce the size of the model slightly before printing. Print Settings Material: Gembird - Blue Pla Plus Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned Permiter:…
Print Settings Material: Gembird - Marble Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
Print Settings Material: Gembird - Silver Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned Permiter: 2 or more for better watertight For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40…
A puzzle made by Prusa's solution (https://blog.prusaprinters.org/print-your-own-3d-puzzles_29817/). If print the z layer colorchange of the puzzle, maybe the game easlyer. I made it from one color, because I intended it for my…
Introducing the next dragon in my dragon lineup! This intricate dragon emulates the look of fools gold in its design. Add it to your collection today! Print Instructions: Supports: No Brim: Recommended For those who have joined my club at…
Print Settings Material: EkoMb - BronseGold Petg Nozzle: 0.4mm Layerheight: 0.20mm Post Process Not necessary
