Counting matching models…
Print with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances. You may need to…
My first attempt, which was oval race-track shaped with a very shallow 20 degree leading edge still managed to catch the PTFE tube. So, I modified the design to be more inspired by cow-catchers on the front of trains. I printed it in PETG…
If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…
Plate Handle – Qidi Q2 and Q2C New Version - V2 A practical handle designed to make removing the build plate from your Qidi Q2/Q2C printer easier and more comfortable. It improves grip and convenience , while also helping to reduce heat…
Allows more space between the junction box and the ingress to the printer
QIDI Q2 Minimalist Riser – Lightweight & Support-Free I designed this riser for my QIDI Q2 because I wanted something lighter and more cost-effective than the "tank-like" models available. If you want to save filament and skip the hassle…
Print in PETG or PLA, no supports needed. About 20% infill is fine. I recommend 3 layer walls for a bit more strength.
I didn't find an enclosed purge bin that I liked, and didn't want to reprint the whole bin again Print it standing up, the original model's settings can be used I printed mine with 0.30 layers + vairiable layer height to be quick, so it…
I like the cameras at nozzle level so I made a creality nebula compatible Qidi q2c door mount. .2 layer height, printed in petg After printing just slide it together, like in the STL. Mounting it inside the chamber with a new case would…
More grip. More clearance. No more pinched fingers. The original QIDI Q2/Q2C door handle is small and leaves very little room between the handle and the glass. This vertical ergonomic replacement provides more finger clearance and a much…
Same screen. Better looks. The original QIDI Q2/Q2C touchscreen does its job, but its appearance leaves a little room for improvement. This decorative screen bezel gives the display a cleaner, more refined look and adds a subtle touch of…
Simple box to hold 10 nozzles for Qidi Q2, Q2C, or Plus5 in their capsules to protect more protection than the capsules themselves do.
Print with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances. You may need to…
If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…
![Qidi Q2 Q2C Plate Handle Grip New Version [v2]](https://media.printables.com/media/prints/5d3949af-d649-4f8e-a496-5b1f0d4bc4f2/images/11691096_29ad4edb-7e2b-46be-9910-74af36e2fc70_e53e21c0-4603-416b-813e-ed4fa4266edf/img20251112122607.jpg)
