Soundcore Life Q30\Q35 Part
Soundcore Life Q30\Q35 Part I reinforced it a bit in the most fragile place, as the original part I had broke during installation Category: Audio Video -
- Downloads
- 1,550
- Likes
- 68
- Rating
- 5
Counting matching models…
Soundcore Life Q30\Q35 Part I reinforced it a bit in the most fragile place, as the original part I had broke during installation Category: Audio Video -
After 2 years of use these pieces broke in my headphones. I believe that is a common thing after some time. I created a 3d model to replace the original, and it works great! Probably better printed in PLA for rigidity and in PETG for…
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
Soundcore Q30 headphones sound good but has a poor build quality. The intend of this design is to reinforce broken headphones or protect them against damage. The protector clip may be made longer (or shorter).
Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 When I screwed my original top enclouser, I made a mistake and after couple of months, I found cracks on it I fixed it with superglue,…
Thanks to Psych0o on Thingiverse for the design and including the STEP file. I've simply modified it to support M3. https://www.thingiverse.com/thing:4565701 Here is the original design that supports M5 25-30.
I wanted a mesh side panel for my PC but couldn't print it in one piece on my Ender 3. This limitation led to me splitting the design into several parts and incorporating the hexagon/cube pattern, which matches the magnetic dust covers of…
HDD bracket that adds an extra HDD (or SSD) mount to the bottom of a Cooler Master Q300L case. Can be used with 2.5" and 3.5" drives, so pretty much all of them since it used the mounting holes at the bottom of the drive. To mount the…
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
Have a nice day, everyone! Like many other guys, I suddenly found that my headphones were broken. But instead of buying another one, I decided to spend a couple of days creating the spare part. I reinforced it as much as I could and think…
This will fit perfectly in your case and will redirect the airflow of the front fans to your graphics card, it will make your pc look better and prints in two pieces without supports. You could print it in one part if your printer is big…
The Q300L has clip-on plastic bars in every corner that can be taken out and swapped around as neccessary for your case configuration. This thing replaces one of those bars with a custom one with mount holes. I've used it to add a…
My PC crashed all the time because my RX590 got too warm. When playing games, the PC ran in something of 82°c. After realizing that the airflow could possibly be the reason for this, I thought that the fan could provide more air using…
A quick design for some PC case feet. Might be helpful on a carpet floor also
The drive screws in from the back, then using some cardboard or other spacers the whole assembly can be screwed in one of the corners around the back of the case. Onshape Link:…
This hook is tailored to the geometry of this particular set of headphones, matching the cushion curve and width. Models should be printed in their current, sideways, orientation for strength. Two versions are included to allow the hook…
Legs for the Cooler Master MasterBox Q300L case. If your case is permanent full of dust because it have to stand on the floor you can use this legs. You need 2 pcs, 8x M4 threaded inserts and 8x M4x8 Screws (optional with washer). Just…
Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 After more than 3 years of using, I found that top of the arm started to crack So, time to new robust design! Did want to create whole…
Modifications: Added spaces for 6x3 Round Magnets and some holes for cable passthrough Magnetic PSU Cover for Cooler Master Q300L/Q300LV2 with holes for cable passthrough Needs 12 6x3 Round Magnets and possibly some glue
Ich habe hier die Drehregler von meinem Weber Q 3200 nachempfunden. Die Originalen haben leider wiederholt ihre Beschriftung verloren. Das passiert jetzt nicht mehr. Gedruckt auf einen A1 mit PETG und dem Strenght Profil bei 0.2mm…
Taller foot for the Q300L. Let's the PSU breathe a little better. It'll clip into place where the original feet go. You can screw in a 4m machine screw into the center clip for extra holding pressure.
This design adds larger buttons to Anker Q30 headphones (transferring presses to the Q30's buttons beneath). The standard ones can be hard to find quickly, especially if wearing gloves. The new buttons can be pressed either axially or…
replacement front and top panels for coolermaster q300l pc case (requires cutting out most of the factory panels). They provide much better thermals than the factory panels. did not provide mounting holes as i wasn't sure of the hole…
Hi, just a simple holder for my Phomemo label tool, to add this to my IKEA Skadis walls. Link to Label tool: Phomemo Beschriftungsgerät mit 3 Etikettenrollen, Q30S Etikettiergerät Selbstklebend Etikettendrucker Bluetooth für iOS &…
A simple holder for earbuds. Category: Computer
I keep my tower under my desk where the top corner is the closest to me and i wanted to add usb-c to the front io. Combined with this , I utilize an existing hole in the metal of the tower directly behind the original cooler master logo.…
These two mounts allow you to attach Behringer EUROPOWER EPQ304 Amplifiers to be attached securely to 8020 extrusion popular with sim racers. I used them to secure the amplifier to my rig for the bass shakers. You can read more about my…
Cooler Master Q300 compatible pump cover. compatible with the Cooler Master Q300 theme.
Use 3mm screws to mount it I guess.
Accessory panel for the MasterBox Q300L, with optional text and hole for... sticking things through the hole. May not fit at first print - your slicer may be sabotaging you! I don't know why this happens. Try scaling it down 2mm or so.
Did my best to fix the geometry to avoid thin areas and smooth the surface.
I made this fan bracket for my open Q300L build, I know it's a very niche way of using this case. If any other lost soul out there is also using the Q300L or Q500L as a platform to overclock the hell out of their hardware, this bracket…
This is a reconstructed battery lock for a night vision device. The original part broke after the device was accidentally dropped, and since the spare part is not commercially available, I redesigned it for 3D printing. Print orientation:…
Top Louver Vent for the Cooler Master Q300L V2 (should be compatible with V1 as well) The stock top panel on the Q300L V2 has small, widely spaced holes that combined with high density mesh filter restrict airflow significantly. This…
Accessory panel for the MasterBox Q300L, with optional text and hole for... sticking things through the hole. May not fit at first print - your slicer may be sabotaging you! I don't know why this happens. Try scaling it down 2mm or so.
Modifications: Added spaces for 6x3 Round Magnets and some holes for cable passthrough Magnetic PSU Cover for Cooler Master Q300L/Q300LV2 with holes for cable passthrough Needs 12 6x3 Round Magnets and possibly some glue
Cooler Master Q300 compatible pump cover. compatible with the Cooler Master Q300 theme.