Counting matching models…
I used PLA+, part cooling fan at 50%, 10 walls, 15% infill. Walls are more important than infill. For heavy use, print in Overture Easy Nylon or PolyMaker CoPA at 100% infill, then anneal and moisture condition. STEP File:…
Airsoft QLS plates compatible with Safariland or Cytac/Amomax via adapter The male and female plates were remixed from (https://www.thingiverse.com/thing:3827837). Print settings: 25% infill 6 walls @ 0.4 or 4 walls @ 0.6 PLA or PETG 0.2…
Updated 9/10/2024 to require much less support material Included .step file and Bambu print profile Accepts the QLS Fork and is meant to be screwed to something like a desk or nightstand with wood screws. PLA is fine for this application.…
These are remix QLS plates from voxpatriam. Added 360 degrees "adapter" for e.g Amomax and Cytac holster. Printed mine in PLA+ ~50% infill for testing durability and prototyping, but your settings are your choice. OG:…
I needed a clever way to organize my Holsters. All of them mount to my rig via the trusty Safariland QLS Plate+Fork System , which does a really good job of locking your gear in place. I had some spare QLS Plates around that i could have…
When I ordered my 6354RDS - ALS Holster for my P320 I didn't know the QLS 22 reciever plates were "made to order" So I recieved the holster first. Since this is my first Safariland holster purchase. It was kinda useless untill the…
I had a Blackhawk Omnivore holster (that I'm assuming uses a standard Blackhawk mounting pattern, so this should work for other Blackhawk holsters as well) and I wanted to mount it to my Safariland belt rig. Made this adapter in Fusion…
Hardware To attach the Amomax hoster to this I would recommend an M6x14mm countersunk bolt. Versions There are two versions, standard and non-standard. Standard Standard uses the normal mounting solution with that bit at the top that…
This was printed on Bambu Labs x1 Carbon. I printed with Inland ABS. 3mf file is already properly orientated. Layer Height: 0.2 Nozzle: 0.4 Infill: 40% Support: Normal(auto), Style: Default Threshold angle: 30
Update 02032024 - Updated models with correct hole sizes for heat set inserts. Spacer/Adaptor that allows you to run your factory Canik Rival holster on your Safariland QLS. I made it as a temporary until i could make up my mind on a new…
The release of the first few MMS Safariland QLS adapters! - Clean QLS Base Mount (No Holes, No Rail) - Short Male QLS Base Mount - Short Female QLS Base Mount - Long Male QLS Base Mount - Long Female QLS Base Mount - QLS Base Mount With…
QLS plate for mounting anywhere. 3 Screw holes are provided. Remixed for even less supports and material! Printed flat on bed w organic tree supports Made and tested with PLA - .3/.6 - 2 Walls -4 Top/Bottom -
A small but handy part that can be mounted to Ikead Skadis pegboards allowing you to attach Safariland QLS gear to it. Based on my previous design . I want to thank user Clay2F for creating a Skadis reference file . Recommended Print…
Listed in the Files tab are .stl files for the QLS-compatible TKOc Hermes holster. These files are tested and are functionally the same as real QLS parts, meaning you can use real QLS parts to attach the Hermes as well. I used Overture…
This buck will allow you to make a holster that fits the safariland qls system. No drilling holes were included, since doing so could leave less room for error. 3mm Tall I suggest printing in PLA+ or ABS, 3 walls should be sturdy enough.
Safariland QLS compatible Fork / prints without support
Design/Spec request by my son that wanted to mount a QLS device (holster) to his wheelchair using the 1 inch ram mounting system. Very sturdy when printed in a carbon fiber or nylon filament, PETG works pretty well. Suggest printing very…
This adapter lets you mount a Safariland QLS Receiver Plate to the Coolermaster Qube so you can attach a Holster with QLS Fork. i used this model in the rendered assembly for demonstration purposes If you need anything, feel free to reach…
Belt caddie to hold 2x5 Sillly Shells for faster reloading. Originally made for use with Breacher (also by Sillybutts). Caddie frame designed to attach to a Safariland QLS 19 Locking Fork.
Replacement part for the Safariland QLS paddle holster. Keeps the holster from being pulled up and off your belt.
This version has been modified with Ghost Shotshell holder pro8 like mounting holes in the middle. For mounting of the holder I've used M5x16 inserted through the fork and a M5 nut on the holder side. Printed for ASA and seems to work…
Safariland QLS compatible Fork / prints without support
This version has been modified with Ghost Shotshell holder pro8 like mounting holes in the middle. For mounting of the holder I've used M5x16 inserted through the fork and a M5 nut on the holder side. Printed for ASA and seems to work…
a simple remix of the QLS Plate with Tek-Lok 0.75 inch patterned drillings.
Small Version: 109.25mm x 111.30mm (4.30in x 4.38in) Large Version: 130.00mm x 130.00mm (5.12in x 5.12in) Fits M5 screws or screws/t-nuts that come with QLS Plate Recommended Slicer Settings: 40% Infill Supports On Build Plate Only .20mm
I like using the Safariland QLS system to easily swap holsters, for highly optimized LARPing. The “GunClip” holster by Crye Precision only mounts with one screw - so while it is possible to attach it to a QLS fork (the QLS19), there is…
