57 models
Mad props to @Br3akfstE4tr for the design and thanks for sharing the f360 file. I remixed this because the eggs my wife gets from her quail are just a bit too big for the original and while I was at it I made it print without supports and…
Coturnix Quail Feeder Port Print as is Recommend PETG 1 1/2 inch drill bit needed Screw isnt perfect but the easiest way is to turn the port upside down when screwing it in.
Hi ! Freshly hatched chicks and quails require a small, practical drinker until they are a few days old. Quail can drown in even a small bowl of water. Drinking it for a few days is a good solution. All you need is a stronger pet bottle…
My take on a stackable egg tray for holding quail eggs, 25 eggs per shelf. Note - the photos with eggs are of an earlier prototype the hight of the legs has since been reduced a little to make them more space efficient. Note - the legs…
Stackable quail egg tray. Fits 32 eggs per tray. 30mm holes for the largest eggs. Designed for storing quail eggs. With the stackable design it will take up less room but still offer a good storage solution
My friend wanted to make him small adapters for his chicken incubator to fit here smaller quail eggs. Printing like it is don't require support, it will snap fit. One adapter need 2.36 grams of plastic and takes ~13 minutes for me (speed…
Small bird feeder designed for quail chicks
It's cute, tiny, adorable, and my favorite little bird. It's a quail with a little tuft. Find this little bird and more of its friends in my Patreon, Thangs, or MMF tribes, happy printing! Follow me on Instagram for new design updates.…
For the first time i tried to sculpt something in blender and ended up with this little guy :) I printed it with only 5% Infill, worked well for me. Maybe a cute little last minute Easterpresent ;)
Ein stapelbarer Wachteleihalter (12St.). Schnelle Druckzeit, keine Stützen und nur wenig Material nötig. A stackable quail egg holder (12). Fast print time, no supports and only little material needed. Verbesserungsvorschläge sind…
Double Cage: You will need Cage Front (x1), Cage Back (x1), Cage Lid (x2), Corner Foot (x4), & Center Foot (x2). The Cage Front & Cage Back are glued (CA or Super Glue) together. Then glue the feet onto the four corners and center.…
They're sitting there like they're in a cotton ball
This bunny can hold a quail egg. Cause to the different egg sizes, please scale up and down as you need. This is for eggs with a diameter of 26mm.
Summary Two files are available to download: Quail Feeder Quail Feeder with Clover decoration Print Settings Supports: None Infill: 5% Brim: (See Additional Information below) Bill of Materials Permanent adhesive Assembly Remove one or…
Food bowl for chickens/quail. Category: Other
Couldn't find anything that worked for me. I just used jb-weld to put ports on instead of the back screws. Included a new V1.1 that includes thicker exterior walls than before.
Small inserts which snap into the holes of a chicken incubator to hole typical quail eggs. Model 2450, but it probably fits others. Printed in PETG, and they've survived a couple of hatchings so far.
Remixed original file, added a base and a head piece so it looks more like a quail than just a regular bird. If you like this model and want to see more, consider donating to my PayPal. https://www.paypal.me/Curtistomlin
Suitable for standard quail eggs. The diameter of the holes is approximately 2.8 cm. You can use it to store eggs in the fridge to keep them from rolling around. The design was created and optimized specifically for 3D printing (no…
My friend has quails and designed a feeder to use with existing bottles and containers. Just trace the back and pop it in! Print upright as the file allows.
Since we have a funny sign in front of each of our stables, of course, no sign was missing at the quail house. Therefore, there is now the Raptor Park here. The hole for the screw has 3mm diameter. The 3mf file is for the Bambu Labs x1c…
Sand bath for quails. printed with Anycubic Kobra 3 Combo PETG Supports only for Text Layer 0,2mm
Open top feeder that holds quite a bit of food. I have to top it off once every two days for 18 quail. slightly mess resistant as the quail need to stick their heads in to eat Held together with Zip ties to avoid glue hassle. and to fit…
Remixed to expand to hold 25 eggs.
Nachdem noch keiner einen Unterschlupf für Wachteln gemacht hat (Außengehege), habe ich eins gezeichnet und gedruckt. Passt aufs Sheet des MK3 / Mk4 / CoreOne und kann beliebig skaliert werden. Etwas Support in der Mitte der Kuppel sowie…
I couldn't find anything easy enough to turn my quail eggs while they were in the incubator so I made a solution.
This is a stand / base for the “ Little Giant - 1QT Jar Poultry Waterer Base - Item# 9826 ”. It was designed to fit perfectly into the lip of the rolled outside edge and raise the base up to keep quail from pooping in it. When it was…
For feeding hatchling quail. Just super glue in 20x5x2 magnets then it's good to go.
Quailfeeder using a TrueFruits 750 ML bottle as storage
I designed and build a small air quality monitor based around an ESP32 using an ENS160, Grove Dust Sensor, and AHT20 to collect data. I made a video about it! Check it out here: I also wrote up an Instructable about the project here:…
To store my quail eggs properly I have built an egg box in the shape of an egg. It suits 14 quail eggs in the box. On the top is also the egg yolk. I recommend to print the lid in white. Print Settings Printer Brand: Creality Printer:…
3D Printable holding devices for hobby CNCs. Using the claw or a pair of beaks to set home X/Y with eggs to maintain the angle and then use cams to hold into position works really well for repeated jobs of the same type. Or just use them…
These are settings I used: 0.16mm layer height support infill 10%
Kühlschrank-Eierfach- Modular / Puzzle für Hünerei Gr.M oder 2 Wachteleier. Fehler-Update 27.04.2025: Der Puzzle-Zapfen bei Dateien Kühlschank-Eierfach- Modular 02 würde bei gemischter Zusammenstellung (2 kleine / 1 großes) zu Schäden am…
Printing Tips I used Prusament PLA in Jet Black, which looks very good with the black Mitras fixtures I have. The model files I've uploaded include the settings I'd recommend: I used Prusa “0.20mm QUALITY” with a couple of modifications:…
no more accidental dropping of the eggs during dying due to the clumsiness of the spoons
A cage bottom grate (dropping guard) for quail and small poultry. Placed above the droppings tray, it prevents birds from coming into contact with waste, keeping the cage cleaner and more hygienic. Scale the model in your slicer to fit…
This is an egg scale for quail eggs. I wanted a scale to help sort eggs for incubating. Washers on the back side are used to balance the scale.
It will prevent birds from tossing out their feed. It's compact enough to fit in any brooder.
The holders can be used with or without magnets. Magnets make the holders snap together. For one holder use two 6x2mm round magnets. Glue them on each side in the round recess, checking polarity to match the next holder. Disclaimer: This…
CO2-ESP32 Arduino CO2 and Temperature logger based on BOSCH BME280 and Winsen MH-Z19B Functions Shows C02, Temperature, Humidity, Pressure Temperature (and humidity) can be corrected, if the BME280 if off calibration Thingspreak…
replacement handle for Quailzz® 3kg quail feeder functions just as the original one, but with a tighter fit and way more durable
Torch Attachment for Candling of Quail Eggs. Inner dia is 44.65mm or 1.7579inch. I Printed it with PETG. TPU is better
I have a blind quail that I would take out so she could dust bathe. Only issue is that I had to keep an eye on her because when she's done she would hop out and try to find her cage. I wanted to give her the freedom the other quail have…
This 3D-printable waterer is designed for baby quails and chicks, making it ideal for brooders and small poultry-raising setups. The base features small raised cylinders designed to help prevent tiny birds, especially newly hatched quail…
I needed a special clamp for mounting to the wall of the square PVC pipe 22mm. Like from Cimuka system or similar. It fits very well and is also stable. For safety reasons, I created a hole so that I can secure the Pipe additionally with…
this is bigfoot doing a wheelie on a dirt bike i did mine with white background and i used height range for colouring and made the top bit black the stl is 5mm thick i made mine 2mm thick, it looks better
Suitable for standard quail eggs. The diameter of the holes is approximately 2.8 cm. You can use it to store eggs in the fridge to keep them from rolling around. The design was created and optimized specifically for 3D printing (no…
I needed a special clamp for mounting to the wall of the square PVC pipe 22mm. Like from Cimuka system or similar. It fits very well and is also stable. For safety reasons, I created a hole so that I can secure the Pipe additionally with…
A cage bottom grate (dropping guard) for quail and small poultry. Placed above the droppings tray, it prevents birds from coming into contact with waste, keeping the cage cleaner and more hygienic. Scale the model in your slicer to fit…
Torch Attachment for Candling of Quail Eggs. Inner dia is 44.65mm or 1.7579inch. I Printed it with PETG. TPU is better
Open top feeder that holds quite a bit of food. I have to top it off once every two days for 18 quail. slightly mess resistant as the quail need to stick their heads in to eat Held together with Zip ties to avoid glue hassle. and to fit…
![[IOT] ESP32 WLAN CO2 Air Quaility Meter](https://media.printables.com/media/prints/199066/images/1836566_44fb9cd0-8a78-4915-9a0b-989244c17a13/0a03251a8d26c85cc3061f258918130a_display_large_19.jpg)
