Counting matching models…
BR218 compatible to IKEA, Lidl or Brio wooden train systems. The whole model can be plugged together and will be fixed with 4 screws: 4x M2x5mm 8x M2x18mm 2x M2.5x15mm The wheels can be put in a metal 2mm shaft with a length of 30mm. The…
The Godox AK-R21 is made to fot the Godox AD100 flash. I want to use it with my AD300 Pro flashes so I created this adapter. After printing I added some silver tape inside to reflect as much light as possible. I included the Fusion 360…
I wish I could design and engineer my own turbofan for my Abarth but I don't have the tools and skills to make the carbonfiber part and to create my own longnut. Despite that, I made this design for 2 thing : To know of it can look on…
An adapter for the Godox AK-R21 Projection system for bowens mount lights instead of the smaller fresnel flash mount that comes with it. For best results use aluminum tape to make the inner surface reflective.…
This is a replacement plate for the bottom of the router. Can also be a starting point for other mods like a track sled for the router. I recommend printing in PETG for rigidity.
Mount your Moza R21 PSU to your T-slot aluminum cockpit well keeping it raised to avoid dust and hair from being sucked into the unit. Will only fit R21 V2, and V1 wheel bases are unconfirmed, but most likely will fit. I haven't found…
To improve the looks of my 'old' Marklin 3074, I designed these 2 pieces.
My own design for the broken foot of my HP KBAR211 keyboard. Found other designs but were not exactly fitting so I designed mine. Hope it could help someone.
Dell powerdege R210II DVD drive replacement with a tray for SSD or HDD.
Vertical stand for Dell poweredge R210II.
simple wallmount for tp-link archer vr2100v
Layer - 0.2 mm Support - YES
This 3D-printed magnetic magazine holder is designed for securely storing a detachable magazine For a bolt-action hunting rifle Heym SR30 and SR21 Blazer Cal.308 Win inside a safe or metal cabinet. The angled mount allows quick access,…
Keyboard 'kickstand' base (idk how that is called) replacement
This is a dust cover for R210CMS to help the table stay clean
Version 1 Zero tolerance saw guard for the Evolution R210 Printed in PLA at 2.8mm use sticky pads to hold in place.
Three different systems I designed to fix gopro or other action cameras to the ROTORACER RR210 frame . I printed them in PETG or TPU (100% Infill for best results).
GoPro Support for DALRC XR215PLUS Category: Hobby
Feet I designed to the ROTORACER RR210 frame . Re-check the correct lenght for the screws. I used screws with 2mm more with these feet. I printed them in PETG or TPU (best).
simple router mount
Hi, here is Mobius holder for Rotoracer RR210. Use velcro on surface and bottom of camera. Camera angle is 25 degrees. Print Settings Printer: CTC Supports: Yes **Resolution:** 0,15 Infill: 50% Notes: Printed on ABS. Category: Hobby
What is this It is a clamp suited for my ATR2100x-USB (32mm diameter) microphone. The clamp fits on a microphone arm with what I think is a 3/8" thread. It is a very tight fit. Don't print this with materials that are prone to snapping. I…
Hi, this is Xiaomi Yi holder for Rotoracer RR210. Angle is 25 degrees. Print Settings Printer: CTC Rafts: No **Supports:** Yes Resolution: 0,15 **Infill:** 50% Notes: Printed on ABS. Category: Hobby
Maturity: Good 7 prototypes. In use since 2026/06. About the part The Seeduino reComputer AI R2000 () not having any cut for a CSI cable or GPIO wires on the side, I designed a house with a cut on the side based on my previous Raspberry…
This is a replacement axis measured from the broken original. I made some changes using Taper to make it printable upright, with a rim. Ok-Button works again, the scroll-function will not work- need to figure out what is missing to latch…
Gridfinity insert, 2x5 units of 42, for Samson R21. Generated with https://outline.georgs.lv/ from measurements.
Keyboard 'kickstand' base (idk how that is called) replacement
To improve the looks of my 'old' Marklin 3074, I designed these 2 pieces.
Original roller in the MR21GC WILL break eventually. Here is a push button to fit instead of the roller. It allows you to use the action button of the remote at the expense of no roller selection. You soon get used to using the…
I purchased a used SimDT 7inch DDU, the included mount was for Simagic and the Moza one would have been 30 dollars to ship and most likely wouldn't have worked, so I made this, sturdy, has up & down adjustment, and faster than getting it…
Battery Cover for the Tecknet Cordless Optical Mouse SKU: EWM01832 , I Believe the model is FR2104
Diese Halterung habe ich speziell für das Netzteil (PSU) der Moza R21 Ultra Wheelbase designt. Sie ermöglicht es, das Netzteil sicher und platzsparend direkt an einem 8040 Aluminiumprofil-Rig zu montieren. Die Passform ist exakt auf das…
Object to mount a Team Black Sheep Unify antenna on a Dalrc XR215(plus). Category: R/C Vehicles
Completely redesigned mount with added antenna holders. Category: R/C Vehicles
Completely redesigned mount with added antenna holders. Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:1068400 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1068400 Instructions Using the following options: front_cc = 28 back_height = 30 velcro_width…
Batterierahmen / Battery frame Husqvarna Rider R214TC
Rahmenschutz Motorhaube / Frame protection engine hood Husqvarna Rider R214TC
Tülle Öltank / Grommet oil tank Hydrostat Husqvarna Rider R214TC
