Counting matching models…
Introduction The racetrack tuner is a capacitive coupler for short transmitting loop antennas. The name is refering to its racetrack form. Racetrack Circus Maximus in Rome - maybe I should call it ’Maximus Tuner’ :-) For use by certified…
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
All the circuits are displayed. The model is in red, white and back.
Snetterton Circuit, located in Norfolk, UK, is a major motorsport venue known for its 2.97-mile "300" layout, which combines fast straights with a technical infield . It is an FIA Grade 2 circuit hosting BTCC, BSB, and British GT…
The Autódromo José Carlos Pace (Interlagos Circuit) , located in the southern zone of São Paulo, is the main motorsport circuit in Latin America and the venue of the São Paulo Formula 1 Grand Prix. Inaugurated in 1940, the current layout…
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I developed and tested the STRONG and EVEN STRONGER…
3D model of the Imola race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Misano racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Monza race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Mugello race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Bahrain race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Zandvoort race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Jeddah race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Albert Park race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Suzuka race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Shanghai racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Miami racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
3D model of the Monaco racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Made for those wall arts in frames. An example of use is shown in the last picture, that is NOT mine. Made, by creating an SVG and then extruding it.
Mantinely na autodráhu. Curbs on the racetrack.
Inspired by the collection of F1 tracks , this is a model of the Padborg Park race track for hanging up on your wall.
Introduction The racetrack tuner is a capacitive coupler for short transmitting loop antennas. The name is refering to its racetrack form. Racetrack Circus Maximus in Rome - maybe I should call it ’Maximus Tuner’ :-) For use by certified…
General Three different mounting alternatives for Racetrack Tuner . Features Add structural strength to Tuner. Mounting alternatives Circular (Broomstick ) Rectangular (Wood) Frontpanel, protecting the knobs Build Print 2 pcs screws with…
This is the core set of my new toy car city road system. It is meant to replace my much older, outdated road system. It features push fit connectors, which allow every road segment to connect in pretty much any way you want. I was…
I did my first track day a few months ago at Streets of Willow and wanted to put up some wall art, was surprised I couldn't find any. I took a screenshot on Google Maps and traced it, no elevation. Enjoy
Podpěra pro zvýšení trati autodráhy. Kvůli snadnějšímu tisku je zvlášť na několik dílů. Není to na časté rozkládání, jeden prodlužovací kus se mi podařilo rozlomit, takže spíš složit a nechat být :-) Můj teprve druhý model. A support for…
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
The Curbs are made for cable duct in size 30x15 mm. You have to drill a 10mm hole in the cable duct, to hold it in place.
Ich bin im Seifenkistenverband Baden-württemberg e. V. aktiv. Hier haben wir eine Rennklasse, die nennen wir Mini Seifenkisten Racer. Kurz: MiniSKR. Dazu gibt es auch eine Internetseite: www.miniskr.de www.seifenkistenverband-bw.de In den…
Nurburgring Nordschleife, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
All the circuits are displayed. The model is in red, white and back.
Sebring International Raceway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Fuji International Speedway, Oyama, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Velocitta Raceway is a high-standard motorsport complex located in Mogi Guaçu, in the countryside of São Paulo. Opened in 2012, the circuit is homologated by the FIA and the CBA, and is recognized for its modern infrastructure integrated…
Circuit Zolder is a historic 4.011 km (2.49-mile) motorsport racetrack in Heusden-Zolder, Belgium , featuring 14 challenging turns and a, technical, high-downforce layout. Known for hosting 10 Formula 1 Belgian Grands Prix (1973–1984), it…
Snetterton Circuit, located in Norfolk, UK, is a major motorsport venue known for its 2.97-mile "300" layout, which combines fast straights with a technical infield . It is an FIA Grade 2 circuit hosting BTCC, BSB, and British GT…
Twin Ring Motegi, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
The Autódromo José Carlos Pace (Interlagos Circuit) , located in the southern zone of São Paulo, is the main motorsport circuit in Latin America and the venue of the São Paulo Formula 1 Grand Prix. Inaugurated in 1940, the current layout…
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
Laguna Seca Speedway, Monterey, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Daytona International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Road America Circuit ,Elkhart Lake, Wisconsin, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Masarykův Okruh, Brno, Czech Republic, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Pista di Fiorano, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
Circuito Ascari, Málaga, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Goodwood Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Autodromo dell'Umbria, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
Brands Hatch, Fawkham, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
EDIT: I got a request for another racetrack, so I added WATKINS GLEN. I was thinking about re-decorating my apartment - spicing-up these old cupboards and lockers or some new pictures on the wall. As I am a huge motorsports fan it might…
Thunderhill Raceway Park, Willows, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Tsukuba Circuit, Shimotsuma, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Long Beach Street Circuit, USA on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
Fiber optic spool holder with racetrack to manage extra fiber. I used this to extend my ISP's fiber and couple it into extra fiber in my house. Has a spot for a panel mount coupler as well. Print it on the bottom face and let the back…
I was commissioned to make this model for PGP Motorsports park and 3D-print a few hundred as promotional giveaways. Print in PETG or TPU to make a reasonably robust keychain trinket. I do not recommend ABS or PLA as they are too stiff
Link to toy: https://www.amazon.com/Palotix-Dinosaur-170PCS-Christmas-Birthday/dp/B08HZ6W83X/ There are many similar versions on amazon, but they should all fit. Just heat up the axle with a lighter to ensure a tight fit and put a dab of…
Ich habe mir hier ein ein Paar Untersetzer für Gläser oder Tassen mit Rennstrecken Konstruiert (Nürburgring Nordschleife, Zandvoort , Spa , RedBull Ring , Circuit de Catalunya , Le Mans , Imola , Monza) ------------------- I've designed a…
I designed this test print in order to check input shaping and accelerations with Klipper Tuning Tower command. Also have fun watching your printer running around this famous circuit. UPDATE 23/08/2023 ADD VERSION WITH 5MM MARKS IN ORDER…
Saw lots of single versions of wall mount race track connectors and thought there needs to be a double. So I whipped one up. This is done in PETG, 100% infill at .3mm layer hieght using a .6 nozzle. Speed at 35mm/s. Nozzle at 245 degrees…
Las Vegas Strip Circuit, Nevada, USA, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…
Phillip Island Circuit, Victoria, Australia, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…
Albert Park Racetrack in the heart of Melbourne Australia.
I found a way to generate topographic maps from saetlite data, then used prusaslicer 2.7 to emboss a track map on it that matches the curves of the hills in the area. the result is a 3d printable topographic track map The finish Line is…
I have designed the objec customizable. I can change imediatly for a bigger 8 or a steel balls of a different size. The steel ball can only be insertet (or fall out) in the center!
I spent a long time looking for an elegant solution for the steep curves that isn't permanent. I found the safety fence and adapted it to the scale and my clips. I have modified my clips so that they can be used in steep bends. The fence…
Immerse yourself in the thrilling world of MotoGP with my exclusive Wall Art that represents the circuits of the 2024 MotoGP season. This collection features detailed representations of the most iconic circuits from the MotoGP calendar,…
Dimensions: 125x139mm Height: 5mm Thickness: 2mm Can be easily scaled up or down. Recommended print setting: Resolution 0.2 or lower Ironing on top surface 20% infill
Includes 2 versions - Barcelona or Barcelona-Catalunya Dimensions: 202x70 mm Height: 5mm Thickness: 2mm Can be easily scaled up or down. Recommended print setting: Resolution 0.2 or lower Ironing on top surface 20% infill
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I developed and tested the STRONG and EVEN STRONGER…
Snetterton, Norwich, Norfolk, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
General These replacement parts are for the CubicFun hahaland Race Track Adventure Toy pictured above. My kids love this thing but it gets a lot of abuse between my 3 toddlers so I've modeled replacement parts as they've gotten broken.…
Replacement foot for USA Toyz Glow Racetrack, much sturdier than the original! Printed at .16mm layer height because of the fine ribs for the interference fit.
![#0161 STRONG #8 Racetrack Double Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/882189/images/6978605_0d7baa1d-6198-4119-97c0-24ae7e11ad5c_795317cf-4c65-4771-8c57-787a2aa39eab/20240615_162825.jpg)
