Counting matching models…
Summary Get more than two dozens multicolor traffic cones in one print - or print them single. They also fit the 1:24 car models I have published. Sizes 1:18 = 30.5mm height 1:24 = 22.8mm height Print Print in 0.2mm layer height. No…
Easy to make a cute Giraffe keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make Mother Giraffe and Son keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Eine süße Giraffe im Voronoi-Stil. Dieses Modell habe ich auf Wunsch meiner Tochter gefertigt. Achtet beim Druck auf die Haftung bei den Beinen, ich habe diese extra stützen müssen. Das Modell wurde mit meinem Prusa MK4 mit eSun HF PLA…
This decorative lamp is meant to represent a pedestrian traffic light. Inside the housing there is space for LED Strips. I powered my version with an ATTINY 13a, which runs a little script for the light sequence. The code can be found…
Giraffe wall art or decoration with geometric design You can also use it as a coaster under your cup or a key chain Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament…
Easy model for printing. Add M5x16mm screw. 35mm in diameter. Printed from ASA with 3 walls and 15% gyroid infill. Plug fit very finely but it would stay attached.
Hello, I have a Traffic Cone for you for slalom. Great fun with the RC car. You can try the slalom. Especially driving the car outside or at home I used PLA/PETG Basic as the material No need to use supports If you are interested in my…
Multipurpose carafe, approximately 1 L in volume. Excellent for BoB dishwasher refills or home gardening.
Ersatzspacer im Deckel der Kenwood Auswurfraffel
This mini traffic cone design can be printed very quickly and without supports. The traffic cones are stackable and can be easily scaled up, making for the perfect fidget toy or desk display. You need a multicolor printer to print these -…
CUTE KNITTED GIRAFFE - Print-in-place - Minimal supports required Join my Patreon to get full access!
Two models of a traffic cone. I first made the 100 mm one, but later wanted a smaller one. Scaling in the slicer made the wall thickness too small so I redesigned it so the wall thickness stays about 1.5 mm. Printable without supports.
A print-in-place articulated Giraffe with 15 joints. Requires no assembly except for the removal of a designed support for the tail. The loose joints make for a fun toy. Robust enough to survive playing with my kids for hours. Printed…
Omg... just LOOK at this little knitted giraffe 😭🧶✨ Can we take a moment for the cuteness overload?! 🥺💕 I designed this little one with so much love and care — it’s got that perfect soft, huggable vibe, but in 3D form! 🤍 Like, if coziness…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by…
The STL file has the highest resolution version of the model. The 3mf is lower resolution but contains prusa-slicer painted-on supports under the chin which I recommend for printing.
This is a remix of this: https://www.thingiverse.com/thing:2999507 I just made some of the overhangs more printable while maintaining the aesthetic. Will print then upload photo. For this type of model I recommend variable layer height if…
Cones galore! Print your own scaled traffic cones in multiple styles. Scale up or down as desired. Please see my other models for more minatures
Pretty straight forward and simple. Needed to create a traffic cone for my wife based on a full size one that was very basic and simple. Instructions I printed this with ABS, 0.2 layers with no support. Category: Toy & Game Accessories
The Flexi Giraffe is a playful and engaging 3D model perfect for those new to 3D printing. It's a single-piece model that comes with built-in joints, which flex and move right after printing. Ideal for a desktop ornament or a child’s toy,…
A very tiny traffic cone for all of your small construction zones! Fashioned from two snap-fit TPU pieces for ease of printing. Example models use Overture Orange 95A TPU for the body and Overture Clear 95A TPU for the reflector. Model is…
I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…
A balloon giraffe sculpture. Supports needed when printing. Take care when you remove supports from the nose, it is a fragile part. ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This 3D printable traffic cone is a scale model of a classic traffic cone. It features a realistic cone shape with a wide base and a pointed top , making it easy to see and handle. The traffic cone is a single-piece design , which means…
Giraffe Decor . Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions popping up about the commercial…
A carved wood giraffe sculpture. Tree supports are EZ to remove, get the whole collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
First, many thanks to Romain for inspiring this remix. My grandsons only know full speed and sometimes stop. So, the yellow caution lamp was replaced with a sliding shutter, exposing either the red or green ‘lamp’. Gravity reared its ugly…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
A giraffe I had a great time sculpting in Sculptris.
Simple traffic cone for small cars like Hot Wheels, Matchbox
Here is a highly detailed 1/10th scale model of a 28-inch tall traffic cone. The file is prepped for easy multicolor printing as the colored areas are segmented as separate faces. The included .3mf file is for Bambu Lab printers. Print…
I combined a turtle and a giraffe in Meshmixer and this is what I got. Enjoy! Print instructions Category: 3D Printing Summary I combined a turtle and a giraffe in Meshmixer and this is what I got. Enjoy! Print Settings Rafts: Yes…
Modular design, you can achieve various sizes and functions by swapping different components - with more additional parts to be introduced later. Suggested print settings (for Prusa machines, others may need some tweaking): Layer height…
This product is an optional Accessory for Model 8: Buggster . Let’s build a race track and compete with your friends! Accessory is designed to be fast printed and it not consume too much filament. This set consist of these independent…
I present a simplified Tiny (baby) version of my previous large giraffe model ( Articulated Giraffe (Print-in-place) by kida | Download free STL model | Printables.com ) This is a fun, small and fast print available both with and without…
The "Giraffe Vase" brings a playful and whimsical charm to interior decor, perfect for animal lovers and those seeking a unique, statement piece. Its soft sage green tone and stylized giraffe features, including adorable ears and a…
Perfect for toy cars, pretend play, obstacle courses, and building mini racetracks. Thanks to 3D printing, the cone is durable yet smooth and completely safe for kids. Material: PLA (eco-friendly plastic, odor-free) Size: Compact and easy…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
This remix is to compliment the LED traffic light designed by Ataris which is here: https://www.printables.com/model/336604-led-traffic-lights/comments/711448 I used the exact same format and extended it to include three lights. The stand…
Graffiti letter stencils There are 27 stencils: A through Z Ñ These stencils measure 100x100mm wide and 0.6mm thick. I chose 0.6mm because it is thin enough to not get in the way of a permanent marker while maintaining some durability.…
A super satisfying spiral fidget toy - this time, shaped like a traffic cone! This shape is fun to play with, and it pro
Meet Bart in his natural element — mid-graffiti mischief! This playful and dynamic figure captures the spirit of everyone’s favorite troublemaker from The Simpsons . With his signature slingshot backpack and spray can in hand, Bart is…
🦒 Tiny flexi giraffe 🦒 The giraffe has a movable head - it can be rotated. Spotted giraffe is only on my patreon. http://patreon.com/Amalthea3DArt
A charming sitting giraffe sculpt with a playful and cute design. Featuring smooth curves, tiny horns, and an adorable expression, this little giraffe captures the heart with its gentle, relaxed pose. Perfect for decor or collectors.
3D Printed Cute Animal Toys for Kids This collection of adorable 3D-printed animal figures is perfect for kids and designed by YAMSASO DESIGN , also known as KRIT YAMSASO . The collection includes a variety of charming animals, each with…
printed by: Ultimaker S3 Material: PLA Print Core: AA 0.4 Model Description: Head - 3mm thick; Body - 1mm thick
Smaller version of https://www.prusaprinters.org/de/prints/114024-traffic-cone Scaled to match Bruder vehicles. I used Das Filament PLA Neonorange colorprint_heights = 10.6, 19.6, 28.6, 37.6
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
This is a 1/10 scale cone that I made for my crawlers. It can be fun when you want to add a little bit of realism to the environment. I wanted to try to print in different colors with the same printer and I thought that this could be a…
Cone traffic sign, on a small scale. Printed in PLA at 190 degrees and nozzle of 0.4mm. Hot bed at 40 degrees. It does not require post impression work, it is ready to use. Cono señal de transito, a escala pequeña. Impreso en PLA a 190…
Verschiedene Europäische Verkehrszeichen Druckbreite: 0,4mm Druckhöhe: 0,2mm Material: PLA Drucker: Bambulab X1C Update 1.1 Neue Verkehrszeichen ---------------------------------------------- Various European traffic signs Print width…
This is a 3D printable, screw-together draw ball inspired by the iconic lottery balls used in UEFA Champions League draws. It’s perfect for raffles, giveaways, tournaments, or even classroom games. The ball consists of two threaded halves…
I created these so that I could mark where I sprayed pest control in my home. Fun little way to alert of a hazard.
Traffic light (Ampel) A Neopixel Stick traffic light - Quick and easy to build - Snap fit - no screws needed Final dimension (assembled): height 17.5cm, width 4cm, depth 4cm Print No support Orientation as in the files Infill 15%…
This is improved version of the great model heavily modified by Rod. I tweaked a stiff shutter mechanism to move a bit more freely and added tracks in two version - for IKEA tracks and for any other brand (Brio, Bigjigs…) as IKEA is using…
This traffic light toy changes state through a manually rotated shutter. The design is intended to be used with translucent filament lenses and a single internal light source, but it could easily be adapted for multiple bulbs.…
Traffic cone 1/24 scale, RC crawler gates
Yet another traffic cone. This one is in 1/10 scale and is modeled as close to the real thing as possible. The width of the base is 31 mm and the total height of the cone is 55 mm. There are two version, one has small perforations on the…
Giraffe (Žirafa) decoration or toy in shape of polygon
Hipster giraffe funny cartoon outline drawing
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
A giraffe shaped cookie cutter. Worked well printed in PLA, 0.2mm layers on 3/8" thick sugar cookie dough (don't run PLA through the dishwasher and expect it not to warp). Should be easy to scale it up or down in the slicer to suit your…
Sonny Angel - giraffe - Serie Animal v3
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
I designed these signs because signs are usually only available for special birthdays. However, every now and then you need a sign with an unusual age, even if it's just for decorative purposes. The size can be individually adjusted in…
Giraffe glasses Holder / Stand .2 layer height with .24 first layer, color change at layer 17, 21, and back to second color at 29(optional to hide pins that glue onto nose piece. Prints with no supports, 3 pieces that I glued together If…
Assembly: The assembly contains 3 parts. Base body with holder + 2x cover with figurines. LED diodes are inserted into the body through the holes. The LEDs are then covered from the front with caps. Printing: Base: 0.4mm nozzle, 0.3mm…
This structural bridge is printed with Prusament PLA. It is designed as a multi functional bridge as you can see from the photos. If you would like to contact me directly via email: [email protected]
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
You can vote for the next free models even if you're not a paid member. These models are voted on by free members on my Patreon. Join them and share the love together! 😊 ✨The multicolor 3MF files for both the normal version and the…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Cute Cars - The Giraffe This is part of a whole series of fun animals in vehicles . The Giraffe car - The giraffe tilts pleasingly from side to side, when you drive the car. No parts need support. The car can be printed on a raft, if you…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
The Voronoi Giraffe is a stylish 3D model that blends the natural elegance of a giraffe with a modern, geometric Voronoi pattern. This design doesn't only capture the essence of the giraffe's long neck and posture but does so through a…
It's a little traffic cone I modeled in Fusion 360 for absolutely no reason. There's two versions. Simple has a flat base. The standard version has a bit of base detail, but can cause issues with poor first layer adhesion. It might also…
Printing things for a traffic light, controlled by an Arduino. One model is for 5 mm LEDs, the other for 10 mm LEDs! You have to write an Arduino-Sketch! #### Take that simple one for first experience :-) : Sketch added to files!…
Stackable Traffic Cone in Scale 1:16 for BRUDER Toys.
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
The space savings of a fabric collapsing cone with the durability of solid PLA. Expands to roughly 170.4mm and collapses to less then 30mm! Each layer can be printed individually to create unique stripped patterns or print as a single…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
I remixed the original Traffic Cone with a bit lower base to print fast in Vase Mode. To avoid the filament change to get the white stripes I tried printing them separate, also in Vase mode. I then just added some glue so they stay…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
Raffhalter für Gardinen / tie-back curtain
Reach for the Sky with the Flexi Giraffe Figure! 🦒☀🌄 Tall, elegant, and full of character, the articulated Giraffe stretches into your collection with its long neck, smooth flexi movement, and charming personality. With every gentle bend…
🌟 Elevate your space with the Voronoi Giraffe – Where Simplicity Meets 🖨 Effortless Elegance : Introducing the Voronoi Giraffe 3D Model 🦒✨ 👌 Minimal Supports : Strategically placed for structural integrity. 🌈 PLA Perfection : Ideal for a…
Traffic Cone Spiral Passthrough Fidget Toy
This is my first assembly project with my 3D Print. This traffic light is comptatible with the Brio system and is easy to integrate. The round part can be directly painted in the correct color or can be printed in white and then colored…
Mini traffic cone model perfect for RC models. Enjoy. Layer height 0,20 Infill 10% Perimeters 2 Standard noozle 0,4mm Second color height 15mm Third color height 25mm Fourth color height 35mm Fifth color height 45mm Material PLA Used…
Stop, slow, or GO! Terrific for a 4-color print! Original design for the 2024 Christmas Community Print Drive . The Traffic Light prints on its back. There is a whole-model version and another with the base and colored light pieces…
Graffiti Alphabet Letters - with and without Dripping Paint background. The letter can be scaled to any reasonable size, there are two different shadow designs dripping paint and clean no drippy mess. You can scale some letters up or down…
First color change at 18.6 mm, afterwards every 14 mm. I used Das Filament PLA Neonorange A smaller version (1/16) is https://www.prusaprinters.org/de/prints/125324-traffic-cone
Here you go! A traffic cone that enables someone to secure all challenging traffic situations, roadworks or driving sites in the toy environment. The 100% part is suitable for PLAYMOBIL. The base of the cone can be picked up by PLAYMOBIL…
![Giraffe Cute Animal Toys for Kids [YAMSASO DESIGN]](https://media.printables.com/media/prints/39f92038-15cf-42f9-a137-f78e88e4b83f/images/10537663_f278c16f-bcd3-4098-8cea-f5fb9c51dd3d_c5a22e63-0fcb-42ac-8ab1-c3d01b83e4c1/008.png)
