44 models
Gridfinity baseplate for the Ikea Råskog utility cart. This is a recreation of Zack Freedman's gridfinity system. Update 18/07/2023 Box for the corners Print Settings Printer: Anycubic Vyper Rafts: No Supports: No Infill: 10 Filament:…
Ikea Raskog Organization Collection Compatible with the Ikea Skadis pegboard using the “universal hook” from this set (not mine). We have several Ikea Raskog project carts at our house and lately I've been using one as an end table. I use…
Summary Presenting a sleek set of hooks designed exclusively for your IKEA Raskog. With a satisfying "click", these hooks latch on securely, providing extra hanging space. How to print Nozzle: 0.4mm Layer Height: 0.2mm Supports: No!…
Modified trash bag holder to hook onto IKEA Raskog utility carts
Small hooks designed to hang on the IKEA utility cart Råskog (raskog) Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Prusament PETG Prusa orange Category: Organization
The HÖGSMA cutting board from IKEA sits too loosely on the RÅSKOG utility cart, these spacers reduce the wiggle and prevent the board from falling into the top tray. Uses four 0.5" (12mm) wood screws but sticky tape/liquid adhesive can be…
I designed this tools support to make full use of the RASKOG trolley space to get all my tools at hand. It is designed for my own tools but I uploaded the Fusion 360 file so it can be adapted to your needs. The two STL files are fitted to…
Print four of these and mirror appropriately. Updated 8/25/2024! This version fits much better and has room for well over 170 paint bottles.
Disclaimer: it seems IKEA RASKOG is very crooked and what fits to one floor does not fit to all the others. Link to the post .
For strength, I recommend printing this on its side so the layer lines are parallel to the axis of symmetry. I made the original a couple of years ago because we have a small bathroom and there was no other place to put the speaker! The…
added a screw hole to accommodate a countersunk M3 screw with a couple of hex nuts to serve as the mounting posts for this Anker A91F2 power strip with keyhole brackets. Should work for any similar item with keyhole brackets, or really…
Hi! Recently got a Råskog rolling cart for my bike workshop and needed somewhere quick and easy to store my Allen keys. I looked around and couldn't find any that suited the Råskog top edge so sorted a simple one out myself. Easy to move…
I took the single version and made a clamping mechanism to allow me to add this holder to a raskog cart. I removed the latching/catch as gravity will hold the batteries and I did not want to deal with pressing the buttons. It is still a…
Beschreibung Erweiterung für IKEA-Servierwagen (RÅSHULT, RÅSKOG) zur praktischen Aufbewahrung von Stifteboxen von Action (z. B. Twinmarker, Aquamarker). Es sind zwei verschiedene Größen enthalten. Tipps zur Befestigung Ziehen Sie die…
2x | M5 Heatset inserts 2x | M5 x 30 SHCS 1x | Bachmann 3er steckdose 51003877 Optionally: 4x | M3 x 30mm 4x | M3 insert
Management modules for RASKOG trolley
Print in something that isnt PLA, PLA tends to creep under load (load being the screws clamping). PETG or even better ABS/ASA is preferred. Hardware Required: 2: 8mm(L) 7.5mm(D) M5 brass inserts 2: M5 Screws (29mm length from start to end…
You need 2 x M5x40mm screws, 4 M3 screws (no idea, id guess also 40mm) and 4 inserts M3 and 2xM5 inserts. Lamp is the common ali one i guess.
Print four of these and mirror appropriately. Updated 8/25/2024! This version fits much better and has room for well over 170 paint bottles.
Pliers Holder for the RASKOG Trolley (the bigger one) that clamps in the vertical bars. It can hold 4 pliers and the only hardware needed are two 3.5x35mm screws to assembly it.
I bought an IKEA Raskog cart and wanted to use the gridfintiy system to organize my stuff. But I didn't realize the cart comes in two different sizes and the available models are only for the bigger cart, so I designed a baseplate which…
. There are seven different sizes of hooks since there will be some variance in the distance between baskets. Pictured examples use the 6mm on middle basket lip and 4mm on lower basket lip. Distance on models is from bottom of pegboard…
Printed on PLA+ with default settings. Could probably glue it onto the bamboo lid. I used scotch tape on the bottom and a piece on top, works fine for a couple weeks of using the lid on and off. Most of the slop is gone, but there is…
I wanted hang my Marshal Mayor IV headphones on the outside of my IKEA Raskog Serving Cart, so I designed a small holder. The top of the holder is slightly convex so that the headphones can fit snugly and no marks are left on the…
required hardware: 4 x M3 x 25mm SHCS 2 x M4 x 12mm+ BHCS 4 x M3 Heated insert (voron ones, idk, 4.2mm? 4mm long?) 2 x M4 heated insert 4mm long (6mm? 5.4mm avreage diamater) 1 x 30cm cheap chinese drawer rail (~10€ for two)
Raskog paint tray for smaller cart, inspired by StormKat rack. Fits 97 paint bottles. Fits Vallejo and other ~fi 25 mm bottles. Print 4 for full tray, mirror appropriately.
Simple cup that clips onto the side of the IKEA RÅSKOG cart. I use it for holding paintbrushes, pens, tools, etc. Designed to fit securely on the cart’s metal frame without wobbling. Supports for overhang needed.
you need 4 M3 screws tapered, 2 M5 heatset inserts, 2 M5 screws (1x20mm, 1x30-35?mm) oh and 4 M3 pins (~25mm) and one zip tie
You need 2 x M5x40mm screws, 4 M3 screws (no idea, id guess also 40mm) and 4 inserts M3 and 2xM5 inserts. Lamp is the common ali one i guess.
Print with 0,15 layers (for nicer screws), no supports, 2 perimeters, 15% infill. PLA works fine. After printing, screw and unscrew the nut to clean up the threads. First time fit will be quite tight so you may want to use 12 mm wrench.…
This is designed to clip on the edge of a rolling cart (raskog) from ikea and hold small tools like screw drivers, tweezers, calipers, etc. The clip slots are in 3mm and 5 mm widths but they could be easily modified. This was developed in…
The model is just created for mini models because I do not have the original dimensions.
A custom container for the corners of the Raskog baseplate that have the corner missing to fit in the trolley. I printed this base plate https://www.printables.com/model/343073-gridfinity-raskog-baseplate and wanted something for the…
I created this because I needed to hang things off of my raskog utility cart. Note, the width might need to be adjusted because the rolled metal width might be different for your cart, so please adjust accordingly. I tested this with 2…
Allows for easy sliding on hard surfaces. No glue required. PTFE tubing slides into slot and the whole thing clamps to the bottom of the cart. Printed with the large opening facing downwards (PTFE Tube slot on top) and added a support…
I believe this should work for both the RASKOG and RASHULT utility carts from IKEA but have not confirmed on the RÅSHULT. I designed the bolt holes to accommodate M5x18mm SHCS or BHCS, but 16mm should work fine and 20mm would just stick…
I bought this model but the height of the worktop does not allow me to mount the last shelf. I modeled this handle to be able to handle the RASKOG trolley You mount it with the original bolt and nut.
