41 models
The original cover has some riser to keep cover of from the display window & buttons. Added those. This one also has Raymarine logo. When printing a single color printer: Slice logo.stl to .gcode Place the body just on the top of logo to…
My old boat has a mix of Raymarine ST60 and ST60+ instruments. It's fairly simple to find printable models of the sun cover for the ST60 model, but I haven't found any good ST60+ cover, so I decided to design it. The differences with the…
Mount for Raymarine TackTick Micro Compass
This is a limit switch carrier that can be added to a Raymarine tiller pilot to prevent the unit from self-destructing in case the motor attempts to drive the unit beyond its physical limits. It needs to be printed in PETG, HT-PLA or…
There are a lot of raymarine suncover models out there, but I did not like them because of the flat top surface the all have to be printed easy. These models have a nice curved surface that makes them very beatiful. For that it is…
Raymarine Trackpad and Rottary UniController for C90w Using the excellent work from Gero Mat added the rottary button.
This is a housing for the Raymarine i70 range of instruments if you want to mount as stand alone instruments. Print 100% infill .20 Drill template has also been included.
Create your own custom chartplotter cap for your flush-mounted Raymarine Axiom 7. Open raymarine-axiom-7-cap.scad in OpenSCAD Add tour own text and text size and save. Render (Design → Render or hit F6) Export as .stl (File → Export →…
This is a simple mount to fit a Tacktick / Raymarine T060 to the bow of a RS100. I used some 3M VHB tape to mount the bracket to the RS100. The mounting bracket can be fixed with 4x M4x6 flat head screws. Threads are already in place.…
Sun cover for Raymarine Axiom 7 MFD
Print both parts. Print in PLA or PETG. PETG is the better option. If you print in PLA use high printing temperature for better layer adhesion. Lower part needs supports. You can also paint the parts for better UV protection.
Instrument sun cover for Raymarine i70 / p70 individually branded (HIGH FIVE) and alternatively with Raymarine letters. Everything printed with PLA. Two step printig is necessary for printers without MMU. How does the glueing work withour…
The Raymarine Autohelm 3000 is an automatic steering unit for sailboats that is no longer for sale. The drive unit is sandwiched between an engagement lever and this washer in the clevis mounted to the hull or binnacle (circled in Fig 16…
Raymarine EV100 or ST1000 mounting solution On my boat there used to be something extremely anoying and dangerous in the cockpit. A piece of square bar welded to a base plate which was bolted onto the side of the cockpit wall. You'd bump…
This ram end cap replaces Raymarine or Autohelm G004. This part is common to ST1000, ST2000, ST4000 and EV100 Tiller pilots. The OEM part is basically cylindrical with a small index line to assist fitting it to the tiller pin. It is thus…
MANETA PILOTO MK1 Drive Unit RAYMARINE Autohelm 4000 / ST4000 REAJUSTADA MEDIDA DEL AGUJERO. SI QUEDA UN POCO GRANDE PONER UN POCO DE PEGAMENTO DENSO PARA RELLENAR EL HUECO, NO INSTANTÁNEO, EN EL AGUJERO. LUEGO PONER UN PAPEL ANTES DE…
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
Piñoneria interna de Piloto automatico raymarine para timon redondo,no de caña.
Printed this for my autohelm 3000 autopilot. I have the lever trimmed to fit my installation. The cog on the eccentric is just a bit bigger than module 1.25, so i used module 1.375. You can edit the cogsize in the assembly, I use it as a…
This is a 1/40 model of the raymarine QUANTUM Q24C RADOME.
Raymarine Dragonfly 4 Pro mount that adapts the fish finder display to sit in a Scotty mount. Print in PETG, 30% infill, with supports (gives best outcome) Allows you to mount a Dragonfly 4 Fish Finder/GPS to a Scotty mount. This piece is…
Inside threads would benefit from printing with thinner layers (used 0.12 myself, but could go a bit higher). Also added a thread test piece if you want to test the threads.
Due to the low screen brightness of these models I designed a sunvisor for it. The visor can be fastened with screws on the back. This design will barely fit a 250 x 210 mm build plate, which is suitable for the MK4, likely the MK3…
Bought a Raymarine ST70 autopilot control head, and it was previously flush mounted, so it didn't come with this surface mount. I figured I could easily find one, but when that wasn't the case, I made this. I had a pdf of the manual, and…
EXTENSIÓN CON TAPÓN Raymarine Tiller Pilot Thrust 3, 6, 9, 12, 15 cm MEZCLA DE: MIXED FROM: https://www.thingiverse.com/thing:5607585 https://www.thingiverse.com/thing:3968010 PETG, ABS, ASA, NYLON. PLA es menos resistente. PLA is less…
A cover to hide the cable mess behind a Raymarine ST-40 display, here a bidata. Just slides on, printed at 0.4mm layer height, I used white PETG.
Should fit to installation hole of E7. You may edit it for your needs (perhaps customize it to fit another chartplotter, gopro, phone, etc).
This part will fit ST1000, ST2000, ST4000 and EV100 Tiller pilots The OEM ram end cap G004 is basically cylindrical with a small index line to assist fitting it to the tiller pin. With the standard part, it is necessary to search…
Raymarine T113 Lanyard adapter replacement Category: Sport & Outdoors
CARCASA RAYMARINE ST-40 BOX EN PRUEBAS - NO ESTÁ TODO CORRECTO. IN TESTS - NOT EVERYTHING IS CORRECT. Category: Replacement Parts
A swivel-pin adaptor and base mount for Raymarine Dragonfly series fishfinders, should fit both 4 and 5 series models since they use the same case, tested on my Dragonfly4. Provides a neater/smaller mount onto flat surfaces then the…
A simple press-fit cover for the Raymarine Cranchi. Print flat side down. No supports needed. See more cool boat projects on www.makersonaboat.com
Adapter for mounting the original Dragonfly cradle to a vertical surface. Hole diameters are sized for M5 hardware.
Domhalterung für eine Merry Fisher 895, für SAT Schüssel von Raymarine 38cm komfortabel incl. Toplicht und Antenne. Der Druck war in ALU. Die Einzelteile wurden Verschweist und Pulverbeschichtet.
The Raymarine (tm) WG-1 Bluetooth Receiver is supplied with a deck-mount solution, which may not suit every installation. For my own yacht I wanted to mount the receiver in a protected location inside the cockpit locker rather than…
This is a mount so you can use the supplied steering lock on a flat surface. Print Settings Rafts: No Supports: No Infill: 90-100% Category: Other
Introduction: I created this model as I had an older Raymarine mount on my center console boat. I doubt there will be others that find this useful or will be using this exact model or not, though I figure just in case. There are three…
If you own a Raymarine P70S and the original touch sealing has degraded or been damaged by sea salt, you may lose proper usability of your autopilot control. Unfortunately, Raymarine does not sell this spare part and will not repair it…
I have designed hatches to hold instruments, autopilot and VHF speaker for my sailboat. They can replace the original hatch. You can easily remove your instruments and access wiring. O-ring inner diameter 135, cross section 2.5, outer…
I have designed hatches to hold instruments, autopilot and VHF speaker for my sailboat. They can replace the original hatch. You can easily remove your instruments and access wiring. O-ring inner diameter 135, cross section 2.5, outer…
This part will fit ST1000, ST2000, ST4000 and EV100 Tiller pilots The OEM ram end cap G004 is basically cylindrical with a small index line to assist fitting it to the tiller pin. With the standard part, it is necessary to search…
