28 models
Module bay door for the "Realacc RX5808 Pro Diversity Module Since there was no door available for the when I ordered mine I immediately began to design my own. Now Realacc offers a injection molded door but in my opinion it is not quite…
A GoPro session mount for a Realacc X210 Pro / X210 V+ racing drone frame. Anti-vibration to help with stability. Designed in Fusion360 and source is at http://a360.co/2pujJxh Updated with latest gopro geometry. Print instructions Print…
Magnetic Stand for Realacc Strange Third Hand from banggood need round neodymium magnet 8mm. if need for another magnet size please comment Category: Tools
A slight redesign of the original file, but tweaked to be a bit lighter, slightly more flexible and fit the Runcam 3 Slighty better. Print instructions Category: R/C Vehicles Summary A slight redesign of the original file, but tweaked to…
Stand for Realacc Strange Third Hand from banggood If you like my things, please consider donating: https://www.paypal.me/Aminokislota Category: Tools
Print in PETG with a new flange to reduce the entry of light Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Amazon Basic PETG Transparent Blue Category: R/C…
A couple of canopy options for a Realacc X210 Pro / X210 V+. After I broke my top plate in a crash with a wooden gazebo during a race, I made this. It features reinforced shoulders and screw points to ensure crashes don't completely…
Arm Protectors Antenna Mount Front bumper Category: R/C Vehicles
Realacc Purple215 frame looks great but based on my experience is not practical at all. camera is blocked by aluminum bars, on each side, cropping the picture. you can only use 5 inch props, because anything longer hits the canopy. Very…
Realacc XS220E top plate with VTX, Runcam Micro Camera Mounts, 45 degree antenna tube holes and separate FrSky FrSky X4RSB receiver mount, utilizing standoffs. This makes the race quad very organized with all components in their…
just cut buttom off to make it support-free Category: R/C Vehicles
LED + Buzzer board mount for Realacc 215 frame. VTX loop on top of the frame I found to be useless, because it is too thick for VTX SMA connector and antenna. So this LED mount will bolt in it's place. Category: R/C Vehicles
I Wanted a Dora kwad,...trow in a bag explore new spots enad make some footage with a cheap micro hd cam with my Realacc Y150 ***7may2018 uplaoded v1 Category: R/C Vehicles
Based off the closed hole 40deg Session mount version. Chopped some different holes for the location of a default install of the RaceFlight Revolt FC. Added a finger hole for VTX changes when it's sitting on top of the FC (TBS Unify).…
my qavx realacc version race pod weighing 21grams and holds runcam micro version 1-3 at a 35 degree angle. the rear mount will hold an rxsr and TBS unify style vtx antenna. you don't need to use the rear mount this will bolt right up to…
my qavx realacc version race pod weighing 21grams and holds runcam micro version 1-3 at a 35 degree angle. the rear mount will hold an rxsr and TBS unify style vtx antenna. you don't need to use the rear mount this will bolt right up to…
This is an improved bay door for the realacc Rx5808 pro plus sold at Banggood.com. It is inspired from the great work done by @DonBowlissimo. Some minor changes for the module to fit better and fit snugly in the RX bay. Also the cut out…
Made a Grid for my Lipo's for Realacc Lipo Bag(220x155x115mm) http://bit.ly/2WyLXFx Print Settings Printer: Craftbot + Rafts: No Supports: No Resolution: 0.4 Infill: 25% Filament: NoName PETG Black Category: R/C Vehicles
This is a mount for the realacc UXII antenna. Printed in TPU. The 180 degree has 3 version. One with 43mm wide spacers distnce. Category: 3D Printing
Redesigned Realacc XS220E frame with custom top plate to house VTX, RC antenna and FPV Camera. Frame comes with low profile canopy which makes props visible in the frame. and makes the build very cramped and hard to fit components in.…
Realacc XS220E Rear Mount for LanTian 2 in 1 WS2812B LED And 5V Active Buzzer Buzzer + LED board Amazon link: https://www.amazon.com/gp/product/B019UVHWMS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Category: R/C Vehicles
Top plate for Realacc XS220E FPV Race Frame with 600mw VTX mount and mount for RunCam Micro Swift 2 600TVL 2.1mm/2.3mm FOV 160/145 Degree Top plate includes window for channel display on VTX and pinhole for channel selection button. Did…
Mount for the iMars mini hd cam, replaces the top plate of the Y150 of Realacc Category: R/C Vehicles
Simple holder for Realacc pagoda antenna. Mounted using two zip ties. The antenna fits snuggly with the silicon boot.
New Mount for Realacc RX150 Print in PET or Nylon for impact proof flying Fits for 19mm cams One is with TBS crossfire mount and one is for normal FRSKY antennas Frame RX150 (Baseplate of Realacc RX150 without the heavy/ugly stock tower/…
Mounts on the back.... standard.... Print instructions Category: R/C Vehicles Summary Mounts on the back.... standard....
I picked up a Realacc RX5808 Pro Plus OSD Receiver and needed a cover for my Eachine Ev200D goggles so I designed one. I printed it at 0.15mm layer height with support. Infill does not matter. The receiver will be a real tight fit if you…
I made these adapter plates so that I could fit my Runcam Split 2 inside my Realacc Real1 frame. I made it so that I could use the original frame holder and slide. In order to use it you need the small hex-nuts that come with Runcam…
